On September 14, 2012 the government announced a new FDI policy for the broadcasting sector. Under the policy, FDI up to 74% has been allowed in broadcasting infrastructure services. Previously the maximum level of FDI permitted in most infrastructure services in the sector was 49% through automatic route. There could be three reasons for the increase in FDI in the sector. First, the broadcasting sector is moving towards an addressable (digital) network. As per Telecom Regulatory Authority of India (TRAI), this upgradation could cost Rs 40,000 crore. Second, the increase in FDI was mandated because a higher FDI was allowed for telecommunication services, which too are utilised for broadcast purposes. In telecommunications 74% FDI is allowed under the approval route. Third, within the broadcasting sector, there was disparity in FDI allowed on the basis of the mode of delivery. These issues were referred to by TRAI in detail in its recommendations of 2008 and 2010. Recent history of FDI in broadcasting services In 2008 and 2010 TRAI had recommended an increase in the level of FDI permitted. A comparison of recommendations and the new policy is provided below. 
As noted in the table, FDI in services that relate to establishing infrastructure, like setting up transmission hubs and providing services to the customers, is now at 49% under automatic route and 74% with government approval. FDI in media houses, on the other hand, have a different level of FDI permitted. TRAI’s recommendations on the two aspects of FDI in broadcasting Digitisation of cable television network: The Cable Televisions Networks Act, 1995 was amended in 2011 to require cable television networks to be digitised. By October 31, 2012 all cable subscriptions in Delhi, Mumbai, Chennai and Kolkata are required to be digitised. The time frame for digitisation for the entire country is December 31, 2014. However, this requires investment to establish infrastructure. As per the TRAI 2010 report, there are a large number of multi-system operators (who receive broadcasting signals and transmit them further to the cable operator or on their own). As per the regulator, this has led to increased fragmentation of the industry, sub-optimal funding and poor services. Smaller cable operators do not have the resources to provide set-top boxes and enjoy economies of scale. As per news reports, the announcement of higher FDI permission would enable the TV distribution industry to meet the October 31 deadline for mandatory digitisation in the four metros. Diversity in television services: FDI in transmitting signals from India to a satellite hub for further transmission (up-linking services) has not been changed. This varies on the basis of the nature of the channel. For non-news channels, FDI up to 100% with government approval was allowed even under the previous policy. However, the FDI limit for news channels is 26% with government approval. In 2008 TRAI had recommended that this be increased to 49%. However, it reviewed its position in 2010. It argued that since FM and up-linking of news channels had the ability to influence the public, the existing FDI level of 26% was acceptable. It also relied upon the level of FDI permitted in the press, stating that parity had to be maintained between the two modes of broadcast. Under the new policy the level of FDI permitted in these sectors has not been changed.
The Monetary Policy Committee (MPC) has decided to conduct an off-cycle meeting today to discuss the failure to meet the inflation target under Section 45ZN of the Reserve Bank of India Act, 1934. As per the Reserve Bank of India Act (RBI), 1934, MPC is required to meet at least four times each year, to discuss the macroeconomic issues in the country, and take policy decisions to address those. This is the second time MPC has conducted an off-cycle meeting in 2022-23. The meeting is scheduled in light of inflation being consistently high for nine consecutive months.
In this blog, we discuss what the inflation targeting framework is, examine retail and wholesale prices, and the divergence between them.
What is the inflation targeting framework, and what happens if inflation is persistently high?
In 2016, Parliament amended the RBI Act, 1934 to change the monetary policy, and introduce an inflation targeting framework. This framework prioritises price stability to achieve sustainable GDP growth. Price stability allows investors to confidently invest their money for productive activities, without worrying about it losing value. Price stability also maintains the purchasing power of consumers, i.e., the ability to purchase a good (or service) with a given amount of money.
As per the new framework, the central government, in consultation with RBI sets: (i) an inflation target, and (ii) an upper and lower tolerance level for retail inflation. The target has been set at 4%, with an upper tolerance limit of 6% and a lower tolerance limit of 2%. The upper and lower limits indicate that although it is desirable for inflation to be close to 4%, deviation between these limits is acceptable. The target and bands are revised every five years. In March 2021, the existing targets were carried forward.
Retail inflation has been above 6% for the past nine months, and it has been above 4% from October 2019 onwards (See Figure 1).
Figure 1: Consumer price index (year-on-year; in percentage)
Sources: Database on Indian Economy, Reserve Bank of India; PRS.
If inflation is above or below the prescribed limits for three quarters, RBI must submit a report to the central government explaining why prices have been rising (or falling) persistently, what will be done to correct that, and an estimate as to when the target will be achieved.
The MPC uses tools such as interest rates to control the level of inflation in the economy. One such rate is the policy repo rate, which is the rate at which RBI lends money to banks. An increase in the policy repo rate makes borrowing money more costly, and hence is expected to control inflation by reducing the money supply. MPC increased this rate from 4% in April 2022 to 4.4% in May 2022, to 4.9% in June 2022, to 5.4% in August 2022, and to 5.9% in September 2022.
Breaking down the Consumer Price Index and the Wholesale Price Index
Consumer Price Index (CPI) measures the general prices of goods and services such as food, clothing, and fuel over time. Retail inflation is calculated as the change in the CPI over a period of time. Goods and services such as petrol, food products, health, and education are considered for its calculation, which are assigned different weights (See Table 1). Between February 2022 and August 2022, the average annual inflation was 6.9%. The rise in prices of subcomponents of the CPI during this period is indicated in Table 2.
|
Table 1: Assigned weights for the calculation of CPI
Sources: MOSPI; PRS. |
Table 2: Average inflation of some CPI components
Sources: Database on Indian Economy, RBI; PRS. |
CPI is not the only index that measures inflation in an economy. The Wholesale Price Index (WPI) measures the wholesale prices of goods. A change in wholesale prices reflects wholesale inflation. Table 3 indicates the weights assigned to goods for calculating the WPI. Manufactured goods include metals, chemicals, food products, and textiles.
|
Primary articles (23%) include food articles, and crude petroleum and natural gas. Fuel and power (12%) include mineral oils, electricity, and coal. WPI has remained above 10% from April 2021 onwards. It reached an all-time high of 17% in May 2022. This was driven by the inflation in metals, kerosene and petroleum coke, fruits and vegetables, and palm oil. |
Table 3:Assigned weights for the
Sources: Ministry of Commerce and Industry; PRS. |
Why has WPI inflation been consistently above CPI inflation?
Movements in the WPI have an impact on the CPI. For almost a year and half, CPI inflation has remained below WPI inflation. However, as per the design of the indices, it is expected that CPI would remain above WPI, and that any increase in WPI would reflect in the CPI after a time lag. This is because retail prices include taxes (as a percentage of price), while wholesale prices do not. Additionally, some of the goods in WPI act as inputs in the goods considered in CPI. An increase in input prices would lead to higher retail prices after a time lag.
We discuss possible reasons for why CPI has remained below WPI for a year and a half.
Figure 2: Consumer Price Index and Wholesale Price Index
Sources: Database on Indian Economy, Reserve Bank of India; PRS.
Composition of indices
As indicated in Table 2 and 3, the composition of the two indices varies. For instance, prices of manufacture of basic metals, chemicals, and machinery grew at an average rate of 13% between February 2021 and September 2022. They contribute 7% to the WPI. These are input goods for producing final goods and services such as automobiles, which are included in the CPI. The rise in prices of transport vehicles, communication devices, fuel for transport, and housing (CPI components) rose by 6% during this period.
The Ministry of Finance has observed that wholesale prices did not feed into retail prices (from March 2021 onwards) as wholesalers absorbed the rising input costs and did not pass them on to retailers. In August 2022, it noted that as retail prices are rising now, the pass-through may occur.
