With 4,203 confirmed cases of COVID-19, Maharashtra has the highest number of cases in the country as of April 20, 2020. Of these, 507 have been cured, and 223 have died. In this blog, we summarise some of the key decisions taken by the Government of Maharashtra for containing the spread of COVID-19 in the state.
Measures taken prior to lockdown
By March 12, the state had registered 11 cases of COVID-19. Consequently, the state government took measures to: (i) prepare hospitals for screening and testing of patients, and (ii) limit mass gathering given the highly contagious nature of the disease. The measures taken by the government before the lockdown are summarised below.
Health Measures
On March 14, the government notified the Maharashtra COVID-19 regulations to prevent and contain the spread of COVID-19 in the state. Key features of the regulations include: (i) screening of COVID-19 patients in hospitals, (ii) home quarantine for people who have travelled through the affected areas, and (iii) procedures to be followed in the containment zones, among others.
Movement Restrictions
On March 15, with 31 COVID-19 cases in the state, the Department of Public Health ordered the closure of cinema halls, swimming pools, gyms, theatres, and museums until March 31. On March 16, all educational institutions and hostels in the state were closed till March 31. The teaching staff was advised to work from home. All exams were also deferred until March 31.
Administrative Measures
On March 13, the Maharashtra government constituted a high-level committee to formulate guidelines for mitigating of the spread of COVID-19 in the state. The responsibilities of the committee included: (i) taking a daily review of the status of COVID-19 in the state, and (ii) implementing the guidelines issued by the World Health Organisation and the Ministry of Health.
On March 17, the first casualty due to COVID-19 occurred in the state. On March 19, the government put restrictions on meetings in the government offices and issued safety guidelines to be followed in these meetings.
On March 20, considering the unmitigated spread of COVID-19 in Mumbai, Pune and Nagpur, the attendance in government offices was restricted to 25%. Subsequently, on March 23, the government limited the attendance in government offices to 5% across the state.
Measures taken post-lockdown
To further restrict the movement of individuals, in order to contain the spread of the disease, the state government enforced a state-wide lockdown on March 23. This lockdown, applicable till March 31, involved: (i) closing down of state borders, (ii) suspension of public transport services, and (iii) banning the congregation of more than five people at any public place. Entities engaged in the supply of essential goods and services were excluded from this lockdown. This was followed by a nation-wide lockdown enforced by the central government between March 25 and April 14, now extended till May 3. Before the extension announced by the central government, the state government extended the lockdown in the state till April 30.
On April 15, the Ministry of Home Affairs issued guidelines on the measures to be taken by state governments until May 3. As per these guidelines, select activities will be permitted in less-affected districts from April 20 onwards to reduce the hardships faced by people. Some of the permitted activities are (i) agriculture and related activities, (ii) MNERGA works, (iii) construction activities, (iv) industrial establishments, (v) health services, (vi) certain financial sector activities among others subject to certain conditions.
Welfare Measures
To address the hardship being faced by residents of the state due to lockdown, the state took several welfare measures summarised as follows:
On March 30, the School Education Department issued directions to all schools in the state to postpone the collection of school fees until the lockdown is over.
The Department of Tribal Development issued directions to provide food/dietary components at home to women beneficiaries and children under Bharat Ratna Dr A.P.J. Abdul Kalam Amrut Aahar Yojana.
The state government issued directives to the private establishments, industries and companies to pay full salaries and wages to their employees.
On April 7, the state Cabinet decided to provide wheat and rice at a subsidised price to all Above Poverty line ration card holders and Shiv Bhojan at Rs 5 for next three months in all Shiv Bhojan centres.
On April 17, the Housing Department notified that landlords/house owners should defer the rent collection for three months. No eviction will be allowed due to non-payment of rent during this period.
Administrative Measures
On March 29, the public works department issued directions suspending the collection of tolls at PWD and MSRDC toll plazas for goods transport until further direction.
MLA Local Development Program: Under MLALAD program, a one-time special exception to use the MLALAD funds was given to legislators for the purchase of medical equipment and materials for COVID-19 during the year 2020-21.
Analysing the impact on the economy of the state: On April 13, the government constituted an Expert Committee and a Cabinet Sub-Committee to analyse the implications of COVID-19 on the economy of the state. These committees will also suggest measures to revive the economy of the state.
Orders relating to Mumbai city
On April 8, the city administration made it compulsory for all people to wear masks in public places.
On April 10, the Commissioner of Police, Greater Mumbai issued an order prohibiting any kind of fake or distorted information on all social media and messaging applications. The order is valid until April 24.
For more information on the spread of COVID-19 and the central and state government response to the pandemic, please see here.
The Monetary Policy Committee (MPC) has decided to conduct an off-cycle meeting today to discuss the failure to meet the inflation target under Section 45ZN of the Reserve Bank of India Act, 1934. As per the Reserve Bank of India Act (RBI), 1934, MPC is required to meet at least four times each year, to discuss the macroeconomic issues in the country, and take policy decisions to address those. This is the second time MPC has conducted an off-cycle meeting in 2022-23. The meeting is scheduled in light of inflation being consistently high for nine consecutive months.
In this blog, we discuss what the inflation targeting framework is, examine retail and wholesale prices, and the divergence between them.
What is the inflation targeting framework, and what happens if inflation is persistently high?
In 2016, Parliament amended the RBI Act, 1934 to change the monetary policy, and introduce an inflation targeting framework. This framework prioritises price stability to achieve sustainable GDP growth. Price stability allows investors to confidently invest their money for productive activities, without worrying about it losing value. Price stability also maintains the purchasing power of consumers, i.e., the ability to purchase a good (or service) with a given amount of money.
As per the new framework, the central government, in consultation with RBI sets: (i) an inflation target, and (ii) an upper and lower tolerance level for retail inflation. The target has been set at 4%, with an upper tolerance limit of 6% and a lower tolerance limit of 2%. The upper and lower limits indicate that although it is desirable for inflation to be close to 4%, deviation between these limits is acceptable. The target and bands are revised every five years. In March 2021, the existing targets were carried forward.
Retail inflation has been above 6% for the past nine months, and it has been above 4% from October 2019 onwards (See Figure 1).
Figure 1: Consumer price index (year-on-year; in percentage)
Sources: Database on Indian Economy, Reserve Bank of India; PRS.
If inflation is above or below the prescribed limits for three quarters, RBI must submit a report to the central government explaining why prices have been rising (or falling) persistently, what will be done to correct that, and an estimate as to when the target will be achieved.
The MPC uses tools such as interest rates to control the level of inflation in the economy. One such rate is the policy repo rate, which is the rate at which RBI lends money to banks. An increase in the policy repo rate makes borrowing money more costly, and hence is expected to control inflation by reducing the money supply. MPC increased this rate from 4% in April 2022 to 4.4% in May 2022, to 4.9% in June 2022, to 5.4% in August 2022, and to 5.9% in September 2022.
Breaking down the Consumer Price Index and the Wholesale Price Index
Consumer Price Index (CPI) measures the general prices of goods and services such as food, clothing, and fuel over time. Retail inflation is calculated as the change in the CPI over a period of time. Goods and services such as petrol, food products, health, and education are considered for its calculation, which are assigned different weights (See Table 1). Between February 2022 and August 2022, the average annual inflation was 6.9%. The rise in prices of subcomponents of the CPI during this period is indicated in Table 2.
|
Table 1: Assigned weights for the calculation of CPI
Sources: MOSPI; PRS. |
Table 2: Average inflation of some CPI components
Sources: Database on Indian Economy, RBI; PRS. |
CPI is not the only index that measures inflation in an economy. The Wholesale Price Index (WPI) measures the wholesale prices of goods. A change in wholesale prices reflects wholesale inflation. Table 3 indicates the weights assigned to goods for calculating the WPI. Manufactured goods include metals, chemicals, food products, and textiles.
|
Primary articles (23%) include food articles, and crude petroleum and natural gas. Fuel and power (12%) include mineral oils, electricity, and coal. WPI has remained above 10% from April 2021 onwards. It reached an all-time high of 17% in May 2022. This was driven by the inflation in metals, kerosene and petroleum coke, fruits and vegetables, and palm oil. |
Table 3:Assigned weights for the
Sources: Ministry of Commerce and Industry; PRS. |
Why has WPI inflation been consistently above CPI inflation?
Movements in the WPI have an impact on the CPI. For almost a year and half, CPI inflation has remained below WPI inflation. However, as per the design of the indices, it is expected that CPI would remain above WPI, and that any increase in WPI would reflect in the CPI after a time lag. This is because retail prices include taxes (as a percentage of price), while wholesale prices do not. Additionally, some of the goods in WPI act as inputs in the goods considered in CPI. An increase in input prices would lead to higher retail prices after a time lag.
We discuss possible reasons for why CPI has remained below WPI for a year and a half.
Figure 2: Consumer Price Index and Wholesale Price Index
Sources: Database on Indian Economy, Reserve Bank of India; PRS.
Composition of indices
As indicated in Table 2 and 3, the composition of the two indices varies. For instance, prices of manufacture of basic metals, chemicals, and machinery grew at an average rate of 13% between February 2021 and September 2022. They contribute 7% to the WPI. These are input goods for producing final goods and services such as automobiles, which are included in the CPI. The rise in prices of transport vehicles, communication devices, fuel for transport, and housing (CPI components) rose by 6% during this period.
The Ministry of Finance has observed that wholesale prices did not feed into retail prices (from March 2021 onwards) as wholesalers absorbed the rising input costs and did not pass them on to retailers. In August 2022, it noted that as retail prices are rising now, the pass-through may occur.
