The protests against the nuclear power plant at Kudankulam have intensified over the recent weeks. The Kudankulam plant is expected to provide 2 GW of electricity annually. However, activists concerned about the risks of nuclear energy are demanding that the plant be shut down. The safety of nuclear power plants is a technical matter. In this blog post we discuss the present mechanism to regulate nuclear energy and the legislative proposals to amend this mechanism. Atomic materials and atomic energy are governed by the Atomic Energy Act, 1962. The Act empowers the central government to produce, develop and use atomic energy. At present, nuclear safety is regulated by the Atomic Energy Regulatory Board (AERB). Some of the drawbacks of the present mechanism are discussed below. Key issues under the present nuclear safety regulatory mechanism The AERB is not empowered to operate as an independent operator. The AERB was established by the government through a notification and not through an Act of Parliament. Its powers and functions are therefore amendable by the Department of Atomic Energy through executive orders. The parliamentary oversight exercised upon such executive action is lower than the parliamentary oversight over statutes. [1. The executive action or the Rules are in force from the date of their notification. They are to be tabled before Parliament mandatorily. However, an executive action is discussed and put to vote in Parliament only if an objection is raised by a Member of Parliament. The executive orders may be reviewed by the committee on sub-ordinate legislation. However, this committee has to oversee a large volume of rules and regulations. For instance, there were 1264 statutory notifications that were tabled before the Rajya Sabha in 2011-12.] Furthermore, the Atomic Energy Commission that sets out the atomic energy policy, and oversees the functioning of the AERB, is headed by the Secretary, Department of Atomic Energy. This raises a conflict of interest, as the Department exercises administrative control over NPCIL that operates nuclear power plants. It is pertinent to note that various committee reports, including a CAG Report in 2011, had highlighted the drawbacks in the present regulatory mechanisms and recommended the establishment of a statutory regulator. A summary of the Report may be accessed here. Proposed mechanism Following the Fukushima nuclear incident in 2011, the Nuclear Safety Regulatory Authority Bill, 2011 was introduced in Parliament to replace the AERB. The Bill establishes the Nuclear Safety Regulatory Authority (NSRA) to regulate nuclear safety, and a Nuclear Safety Council to oversee nuclear safety policies that the NSRA issues. Under the Bill, all activities related to nuclear power and nuclear materials may only be carried out under a licence issued by the NSRA. Extent of powers and independence of the NSRA The Bill establishes the NSRA as a statutory authority that is empowered to issue nuclear safety policies and regulations. The Nuclear Safety Council established under the Bill to oversee these policies includes the Secretary, Department of Atomic Energy. The conflict of interest that exists under the present mechanism may thus continue under the proposed regulatory system. The Bill provides that members of the NSRA can be removed by an order of the central government without a judicial inquiry. This may affect the independence of the members of the NSRA. This process is at variance with enactments that establish other regulatory authorities such as TRAI and the Competition Commission of India. These enactments require a judicial inquiry prior to the removal of a member if it is alleged that he has acquired interest that is prejudicial to the functions of the authority. The proposed legislation also empowers the government to exclude strategic facilities from the ambit of the NSRA. The government can decide whether these facilities should be brought under the jurisdiction of another regulatory authority. These and other issues arising from the Bill are discussed here.
The results of General Election 2019 were declared last week concluding the process for electing the 17th Lok Sabha. Immediately after the results, the previous Lok Sabha was dissolved. The next couple of days will witness several key events such as swearing-in ceremony of the Prime Minister and Cabinet, and the first session of the 17th Lok Sabha. In the first session, the newly elected MPs will take their oaths, the Speaker of the 17th Lok Sabha will be elected, and the President will address a joint sitting of Parliament. In this blog, we explain the process and significance of the events that will follow in the days to come.
Key Events in the First Session of the 17th Lok Sabha
The Bharatiya Janta Party has emerged as the single largest party and the leader of the party will be sworn-in as the Prime Minister. As per Article 75(1) of the Constitution, the other ministers are appointed by the President on the advice of the Prime Minister. The 91st Amendment to the Constitution limits the total size of the Council of Ministers to 15% of the total strength of the House (i.e., 81 Ministers). As per media reports, swearing-in of the Council of Ministers is scheduled for May 30, 2019.
How is the schedule for first session decided?
The 17th Lok Sabha will commence its first session in the first week of June. The exact date of commencement of the first session and the schedule of key events in the session, including the date of President’s address, is decided by the Cabinet Committee on Parliamentary Affairs. This Committee will be set up after the swearing in of the Council of Ministers. The previous Lok Sabha had commenced on June 4, 2014 and its first session had six sitting days (June 4, 2014 to June 11, 2014).
Who presides over the first session?
Every proceeding of the House is presided by a Speaker. The Office of the Speaker becomes vacant immediately before the first meeting of a new Lok Sabha. Therefore, a temporary speaker, known as the pro-tem Speaker, is chosen from among the newly elected MPs. The pro-tem Speaker administers oath/affirmation to the newly elected members, and also presides over the sitting in which the new Speaker is elected. The office of the pro-tem Speaker ceases to exist when the new Speaker is elected.
How is the pro-tem speaker chosen?
Once the new government is elected, a list containing the names of the senior-most members of the House is prepared. The seniority is decided by total tenure as a member of either Lok Sabha or Rajya Sabha. The Prime Minister then identifies a Member from the list who acts as the Speaker pro-tem. Three other members are also identified before whom other members may take oath/affirmation.
How is the new Speaker chosen?
|
Any member may give notice of a motion that another Member be chosen as the Speaker of the House. The motions are then moved and voted upon. After the results are announced, the Speaker-elect is felicitated by leaders of all political parties, including the Prime Minister and Leader of the Opposition. From then, the new Speaker takes over the proceedings of the House. |
 |
|
An understanding of the Constitution, the Rules of Procedure, and conventions of Parliament is considered a major asset for the Speaker. While this might indicate that a Speaker be one of the senior-most members of the House, this has not always been the norm. There have been occasions in the past where the Speaker of the House was a first-time MP. For instance, Mr. K.S. Hegde, the Speaker of the sixth Lok Sabha and Mr. Bal Ram Jakhar, the Speaker of the seventh Lok Sabha were both first time MPs |
 |
What is the role of the Speaker in the House?
The Speaker is central to the functioning of the legislature. The proceedings of the House are guided by the Rules of Procedure and the final authority for the interpretation and implementation of these rules rests with the Speaker. The Speaker is responsible for regulating the discussion in the House and maintaining order in the House. For instance, it is the Speaker’s discretion on whether to allow a member to raise a matter of public importance in the House. The Speaker can suspend a sitting member for obstructing the business of the House, or adjourn the House in case of major disorder.
The Speaker is also the chair of the Business Advisory Committee, which is responsible for deciding the business of the House and allocating time for the same. The Speaker also chairs the General Purposes Committee and the Rules Committee of the Lok Sabha and appoints the chairpersons of other committees amongst the members. In the past, Speakers have also been instrumental in strengthening the Committee system. Mr. Shivraj Patil, the Speaker of the 10th Lok Sabha, played a key role in the initiation of 17 Departmental Standing Committees, therefore strengthening Parliament’s control over the functioning of different ministries of the government.
Since the Speaker represents the entire House, the office of the Speaker is vested with impartiality and independence. The Constitution and the Rules of Procedure have prescribed guidelines for the Speaker’s office to ensure such impartiality and independence. Dr. N. Sanjiva Reddy, the Speaker of the fourth Lok Sabha, formally resigned from his political party as he was of the opinion that the Speaker belongs to the whole House and should therefore remain impartial. As per Article 100 of the Constitution, the Speaker does not exercise vote on any matter being voted upon, in the first instance. However, in case there’s a tie during the voting, the Speaker exercises her vote.
What does the President’s Address entail?
The election of the Speaker is followed by the President’s Address. Article 87 of the Constitution requires the President to address both Houses at the beginning of the first session after each general election. The President also addresses both the Houses at the beginning of the first session of each year. The President’s address highlights the initiatives of the government from the previous year, and mentions the policy priorities for the upcoming year. After the address, the ruling party moves a Motion of Thanks to the President’s address in both Houses of Parliament. In the Motion of Thanks, MPs may move amendments to the motion, which are then put to vote.
The President of India, Mr. Ram Nath Kovind will address Parliament in this first session of the 17th Lok Sabha. During the 16th Lok Sabha, the first President’s address was held on June 9, 2014 and the last time he addressed Parliament was on January 31, 2019 (highlights of this address can be read here).
Sources: The Constitution of India; Rules and Procedure and Conduct of Business in Lok Sabha; Handbook on the Working of Ministry of Parliamentary Affairs; The website of Parliament of India, Lok Sabha; The website of Office of the Speaker, Lok Sabha.
