The Chemical Weapons Convention (Amendment) Bill, 2010 (the Bill) was recently passed by the Lok Sabha without any amendment.  The Chemical Weapons Convention Act, 2000 (the Act) was enacted to give effect to the United Nations Convention on the Prohibition of the Development, Production, Stockpiling and Use of Chemical Weapons and on their Destruction (the CWC).  The CWC aims to eliminate chemical weapons by prohibiting their development, acquisition, stockpiling, transfer or use by State Parties. The 188 State Parties of the CWC are required to take the steps necessary to prohibit these activities within their jurisdiction. India signed the Convention on January 14, 1993. The Bill was introduced in the Rajya Sabha on April 16, 2010 by the Minister of State in the Ministry of Chemicals and Fertilizers, Mr. Srikant Kumar Jena.  The Standing Committee submitted its report on August 3, 2010. This Bill was passed by the Rajya Sabha on May 3, 2012 with some amendments based on the recommendations of the Standing Committee.  The recommendations of the standing committee and the subsequent amendments made by the Rajya Sabha are as follows:

  • The Act disallows any person from transferring or receiving specified toxic chemicals from a citizen of a non-State Party.  The Bill changes this position by prohibiting transfer or receipt of the specified toxic chemicals from a non-State Party to the Convention.  The Committee recommended that the provision should clearly prohibit transfer or receipt from both non-State Parties and citizens of non-State Parties.  The Rajya Sabha has made the corresponding amendment to the Bill.
  • The Act mandates the registration of persons engaged in the production, transfer, or use of any toxic chemical.  The Bill makes registration mandatory, subject to certain threshold limits that are prescribed, for manufacturers of specified chemicals.  The Committee observed that this would make registration mandatory only for those manufacturers who cross the specified limit.  Thus, the Committee asked the government to consider a two-step process of compulsory registration of all manufacturers, followed by a declaration of those crossing the threshold limits.  This recommendation has not been accepted by the Rajya Sabha.  Hence, only those persons whose production of toxic chemicals exceeds the threshold would be required to register.
  •  The Act established a National Authority to implement the provisions of the Convention.  It empowers the central government to appoint officers of the National Authority as enforcement officers. The Bill broadens the central government’s power by allowing it to appoint any of its officers as enforcement officers.  The Committee recommended that eligibility criteria, such as technical qualifications and expertise, for these officers should be set under the rules.  The Committee also recommended that officers should be given suitable training before their appointment.  The Rajya Sabha has incorporated the suggestion of prescribing eligibility criteria under the Bill.

The Lok Sabha passed the Bill on August 30, 2012 without any amendments.  The standing committee report and its summary may be accessed here and here.

The Monetary Policy Committee (MPC) has decided to conduct an off-cycle meeting today to discuss the failure to meet the inflation target under Section 45ZN of the Reserve Bank of India Act, 1934. As per the Reserve Bank of India Act (RBI), 1934, MPC is required to meet at least four times each year, to discuss the macroeconomic issues in the country, and take policy decisions to address those. This is the second time MPC has conducted an off-cycle meeting in 2022-23. The meeting is scheduled in light of inflation being consistently high for nine consecutive months.

In this blog, we discuss what the inflation targeting framework is, examine retail and wholesale prices, and the divergence between them.   

What is the inflation targeting framework, and what happens if inflation is persistently high?

In 2016, Parliament amended the RBI Act, 1934 to change the monetary policy, and introduce an inflation targeting framework. This framework prioritises price stability to achieve sustainable GDP growth. Price stability allows investors to confidently invest their money for productive activities, without worrying about it losing value. Price stability also maintains the purchasing power of consumers, i.e., the ability to purchase a good (or service) with a given amount of money.

As per the new framework, the central government, in consultation with RBI sets: (i) an inflation target, and (ii) an upper and lower tolerance level for retail inflation. The target has been set at 4%, with an upper tolerance limit of 6% and a lower tolerance limit of 2%. The upper and lower limits indicate that although it is desirable for inflation to be close to 4%, deviation between these limits is acceptable. The target and bands are revised every five years. In March 2021, the existing targets were carried forward.  

Retail inflation has been above 6% for the past nine months, and it has been above 4% from October 2019 onwards (See Figure 1).

Figure 1: Consumer price index (year-on-year; in percentage)

image

Sources: Database on Indian Economy, Reserve Bank of India; PRS.

If inflation is above or below the prescribed limits for three quarters, RBI must submit a report to the central government explaining why prices have been rising (or falling) persistently, what will be done to correct that, and an estimate as to when the target will be achieved.   

The MPC uses tools such as interest rates to control the level of inflation in the economy. One such rate is the policy repo rate, which is the rate at which RBI lends money to banks. An increase in the policy repo rate makes borrowing money more costly, and hence is expected to control inflation by reducing the money supply. MPC increased this rate from 4% in April 2022 to 4.4% in May 2022, to 4.9% in June 2022, to 5.4% in August 2022, and to 5.9% in September 2022.

Breaking down the Consumer Price Index and the Wholesale Price Index

Consumer Price Index (CPI) measures the general prices of goods and services such as food, clothing, and fuel over time. Retail inflation is calculated as the change in the CPI over a period of time. Goods and services such as petrol, food products, health, and education are considered for its calculation, which are assigned different weights (See Table 1). Between February 2022 and August 2022, the average annual inflation was 6.9%. The rise in prices of subcomponents of the CPI during this period is indicated in Table 2.

Table 1: Assigned weights for the calculation of CPI

Category

Weight

Food and beverages

46%

Miscellaneous (including petrol and diesel, health, and education)

28%

Housing

10%

Clothing and footwear

7%

Fuel and light

7%

Pan, tobacco, and intoxications

2%

Total

100%

Sources: MOSPI; PRS.

Table 2: Average inflation of some CPI components
between February 2022 to August 2022 (in percentage)

Subcategory of CPI

Average inflation

Vegetables 

13.26%

Oils and fats

12.46%

Footwear

11.41%

Fuel and Light

9.88%

Transport and communication

7.74%

Cereals and products

6.05%

Sources: Database on Indian Economy, RBI; PRS.

CPI is not the only index that measures inflation in an economy. The Wholesale Price Index (WPI) measures the wholesale prices of goods. A change in wholesale prices reflects wholesale inflation. Table 3 indicates the weights assigned to goods for calculating the WPI. Manufactured goods include metals, chemicals, food products, and textiles.   

Primary articles (23%) include food articles, and crude petroleum and natural gas. Fuel and power (12%) include mineral oils, electricity, and coal.  WPI has remained above 10% from April 2021 onwards. It reached an all-time high of 17% in May 2022. This was driven by the inflation in metals, kerosene and petroleum coke, fruits and vegetables, and palm oil.

Table 3:Assigned weights for the
calculation of WPI (in percentage)

Category

Weight

Manufactured products

64%

Primary articles

23%

Fuel and power

12%

All commodities

100%

Sources: Ministry of Commerce and Industry; PRS.

Why has WPI inflation been consistently above CPI inflation?

Movements in the WPI have an impact on the CPI.  For almost a year and half, CPI inflation has remained below WPI inflation.  However, as per the design of the indices, it is expected that CPI would remain above WPI, and that any increase in WPI would reflect in the CPI after a time lag.  This is because retail prices include taxes (as a percentage of price), while wholesale prices do not.  Additionally, some of the goods in WPI act as inputs in the goods considered in CPI.  An increase in input prices would lead to higher retail prices after a time lag.

We discuss possible reasons for why CPI has remained below WPI for a year and a half.

Figure 2: Consumer Price Index and Wholesale Price Index

image

Sources: Database on Indian Economy, Reserve Bank of India; PRS.

Composition of indices

As indicated in Table 2 and 3, the composition of the two indices varies. For instance, prices of manufacture of basic metals, chemicals, and machinery grew at an average rate of 13% between February 2021 and September 2022.  They contribute 7% to the WPI. These are input goods for producing final goods and services such as automobiles, which are included in the CPI. The rise in prices of transport vehicles, communication devices, fuel for transport, and housing (CPI components) rose by 6% during this period.

The Ministry of Finance has observed that wholesale prices did not feed into retail prices (from March 2021 onwards) as wholesalers absorbed the rising input costs and did not pass them on to retailers. In August 2022, it noted that as retail prices are rising now, the pass-through may occur.