As of April 27, 2020, there are 27,892 confirmed cases of COVID-19 in India. Since April 20, 10,627 new cases have been registered. Out of the confirmed cases so far, 6,185 patients have been cured/discharged and 872 have died. As the spread of COVID-19 has increased across India, the central government has continued to announce several policy decisions to contain the spread, and support citizens and businesses who are being affected by the pandemic. In this blog post, we summarise some of the key measures taken by the central government in this regard between April 20 and April 27, 2020.
Source: Ministry of Health and Family Welfare; PRS.
Lockdown
Relaxation of lockdown for shops in specific areas
On April 25, the Ministry of Home Affairs passed an order allowing the opening of: (i) all shops in rural areas, except those in shopping malls, and (ii) all standalone shops, neighbourhood shops, and shops in residential complexes in urban areas. Shops in markets, market complexes, or shopping malls in urban areas are not allowed to function. Only shops registered under the Shops and Establishments Act of the respective state or union territory will be allowed to open. Further, no shops can open in rural or urban areas that have been declared as containment zones. The order also specifies that the sale of liquor continues to be prohibited.
Functioning of Central Administrative Tribunals to remain suspended
The functioning of Central Administrative Tribunals will remain suspended until May 3, 2020. Once functioning begins, certain days already declared as holidays may be reassigned as working days. This decision was made keeping in mind that most of the Central Administrative Tribunals are located in COVID-19 hotspots.
Financial measures
RBI announces Rs 50,000 crore special liquidity facility for Mutual Funds
The Reserve Bank of India (RBI) has decided to open a special liquidity facility for mutual funds (SLF-MF) worth Rs 50,000 crore. This will ease liquidity pressures on mutual funds. Under the SLF-MF, RBI will conduct repo operations of 90 days tenor at the fixed repo rate. The SLF-MF will be available for immediate use, and banks can submit their bids to avail funding. The scheme is available from April 27 to May 11, 2020, or until the allocated amount is utilised, whichever is earlier. RBI will review the timeline and amount of the scheme, depending upon market conditions. Funds availed under the SLF-MF can be used by banks exclusively for meeting the liquidity requirements of mutual funds. This can be done through: (i) extending loans, and (ii) undertaking outright purchase of and/or repos against collateral of investment grade corporate bonds, commercial papers, debentures, and certificates of deposits held by mutual funds.
RBI extends benefits of Interest Subvention and Prompt Repayment Incentive schemes for short term crop loans
The Reserve Bank of India has advised banks to extend the benefits of Interest Subvention of 2% and Prompt Repayment Incentive of 3% for short term crop loans up to three lakh rupees. Farmers whose accounts have become due or will become due between March 1, 2020 and May 1, 2020 will be eligible.
Protection of healthcare workers
The Epidemic Diseases (Amendment) Ordinance, 2020 was promulgated
The Epidemic Diseases (Amendment) Ordinance, 2020 was promulgated on April 22, 2020. The Ordinance amends the Epidemic Diseases Act, 1897. The Act provides for the prevention of the spread of dangerous epidemic diseases. The Ordinance amends the Act to include protections for healthcare personnel combatting epidemic diseases and expands the powers of the central government to prevent the spread of such diseases. Key features of the Ordinance include:
Definitions: The Ordinance defines healthcare service personnel as a person who is at risk of contracting the epidemic disease while carrying out duties related to the epidemic. They include: (i) public and clinical healthcare providers such as doctors and nurses, (ii) any person empowered under the Act to take measures to prevent the outbreak of the disease, and (iii) other persons designated as such by the state government.
An ‘act of violence’ includes any of the following acts committed against a healthcare service personnel: (i) harassment impacting living or working conditions, (ii) harm, injury, hurt, or danger to life, (iii) obstruction in discharge of his duties, and (iv) loss or damage to the property or documents of the healthcare service personnel. Property is defined to include a: (i) clinical establishment, (ii) quarantine facility, (iii) mobile medical unit, and (iv) other property in which a healthcare service personnel has direct interest, in relation to the epidemic.
Protection for healthcare personnel and damage to property: The Ordinance specifies that no person can: (i) commit or abet the commission of an act of violence against a healthcare service personnel, or (ii) abet or cause damage or loss to any property during an epidemic. Contravention of this provision is punishable with imprisonment between three months and five years, and a fine between Rs 50,000 and two lakh rupees. This offence may be compounded by the victim with the permission of the Court. If an act of violence against a healthcare service personnel causes grievous harm, the person committing the offence will be punishable with imprisonment between six months and seven years, and a fine between one lakh rupees and five lakh rupees. These offences are cognizable and non-bailable.
For more details on the Ordinance, please see here.
Financial aid
Progress under the Pradhan Mantri Garib Kalyan Package
According to the Ministry of Finance, between March 26 and April 22, 2020, approximately 33 crore poor people have been given financial assistance worth Rs 31,235 crore through bank transfers to assist them during the lockdown. Beneficiaries of the bank transfers include widows, women account holders under Pradhan Mantri Jan Dhan Yojana, senior citizens, and farmers. In addition to direct bank transfers, other forms of assistance have also been initiated. These include:
40 lakh metric tonnes of food grains have been provided to 36 states and union territories.
2.7 crore free gas cylinders have been delivered to beneficiaries.
Rs 3,497 crore has been disbursed to 2.2 crore building and construction workers from the Building and Construction Workers’ Funds managed by state governments.
For more information on the spread of COVID-19 and the central and state government response to the pandemic, please see here.
The counting of votes for General Election 2019, which concluded on Sunday, will begin tomorrow, i.e., 23rd May at 8 AM. The election was conducted in 7 phases for 543 constituencies of Lok Sabha. The Election Commission of India (ECI) uses Electronic Voting Machines (EVM) to conduct elections. Since 2000, ECI has conducted 113 assembly elections and three general elections using EVMs.[1] Voter Verified Paper Audit Trail (VVPAT) system was added to EVMs in 2013 to increase transparency and improve voter confidence in the system. The VVPAT system generates a printed paper slip bearing the name and election symbol of the candidate. On April 8, 2019, Supreme Court instructed the ECI that printed VVPAT slips from randomly selected five polling stations in each assembly segment of a parliamentary constituency should be matched with EVMs.[2] In this blog, we explain the election counting process in India.
Who is responsible for counting the votes?
The Returning Officer (RO) is responsible for conducting elections in a constituency, which also includes counting of votes.[3] The RO is an officer of the government or a local authority nominated by the ECI for each constituency in consultation with the state government.[4]
Where does the counting take place?
The RO decides the place where the votes will be counted for the parliamentary constituency. The date and time of counting is fixed by the ECI. Ideally counting of votes for a constituency should be done at one place, preferably at the Headquarter of the RO in that constituency. It should be performed under the direct supervision of the RO. However, each Parliamentary Constituency has multiple assembly segments. In this situation, counting can take place at different locations for various assembly segments under the direct supervision of an Assistant Returning Officer (ARO).
Layout of the Counting Hall
Page 431, Handbook for Returning Officer Document 23 Edition 1, Election Commission of India
Counting of votes for each assembly segment of a parliamentary constituency is performed in a single hall. In each round of counting, votes from 14 EVMs are counted. In case of simultaneous parliamentary and assembly elections, such as Odisha, the first seven tables are used for counting votes for assembly elections, and the rest for parliamentary elections.
In constituencies with a large number of candidates, it may not be possible to count votes for all candidates in a single hall without overcrowding it. In such a situation, the number of counting halls or tables can be increased with the prior permission of the ECI. A hall can also be used for counting votes of another assembly segment after the results of the first segment are declared. However, counting may be done for only one assembly segment in a hall at any point of time.
What is the counting process?
Counting is performed by counting supervisors appointed by the RO. Counting staff is appointed through a three stage randomisation process to ensure impartiality. Candidates along with their counting agents and election agents are also present in the counting hall.
Counting of votes begins with Electronically Transmitted Postal Ballots (ETPB) and Postal Ballots (PB). These votes are counted under the direct supervision of the RO. Counting of EVMs can start 30 minutes after the commencement of PB counting, even if all PBs have not been counted. At the end of each round of counting, the results from 14 EVMs are declared.
What is the process for counting VVPAT slips?
The ECI prescribes the process for randomly selecting one EVM for each assembly segment of a parliamentary constituency for VVPAT matching. The verification of VVPAT paper slips is conducted inside a secured VVPAT Counting Booth in the counting hall with access to authorised personnel only. Any counting table in the hall can be converted into VVPAT Counting Booth after completing EVM vote counting. Parliamentary constituencies generally have between five and ten assembly segments.
The Supreme Court has decided that VVPAT slips of five randomly selected polling stations for each assembly segment shall be matched with the result shown in the respective EVMs. This implies that VVPAT paper slips need to be matched for about 25-50 machines for each parliamentary constituency. This process requires personal supervision of RO/ARO. The ECI has decided that the counting of five VVPATs will be done sequentially.[5] The RO can declare the final result for the constituency after the VVPAT matching process has been completed.
What happens if there is a discrepancy between the VVPAT count and the EVM results?
In such a case, the printed paper slips count is taken as final. The ECI has not clarified whether there would be any further action (such as counting of all VVPATs in a constituency or assembly segment) if there is a discrepancy in the counts of one of the five VVPATs.
[1] https://www.eci.gov.in/files/file/8756-status-paper-on-evm-edition-3/.
[2] N Chandrababu Naidu and Ors. v. Union of India and Anr WP(C). 273/2019 decided on April 8, 2019.
[3] https://www.eci.gov.in/files/file/9400-hand-book-for-returning-officer-february-2019/.
[4] https://www.eci.gov.in/faqs/elections/election-machinery/faqs-election-machinery-r1/.
[5] https://www.eci.gov.in/files/file/10197-mandatory-verification-of-vvpat-paper-slips-regarding/.
