As of May 22, 2020, there are 1,18,447 confirmed cases of COVID-19 in India, which is 76% higher than the cases on May 11, 2020 (67,152). Out of total confirmed cases, there are 66,330 active cases, 48,354 patients have been cured/discharged and 3,583 have died (Figure 1). As the spread of COVID-19 has increased across India, the central government has continued to announce several policy decisions to contain the spread, and support citizens and businesses who are being affected by the pandemic. In this blog post, we summarise some of the key measures taken by the central government in this regard between May 11 and May 22, 2020.
Figure 1: Number of day wise COVID 19 cases as on May 22, 2020
Aatma Nirbhar Bharat Abhiyaan
On May 12, the Prime Minister, Mr. Narendra Modi, announced a special economic package of Rs 20 lakh crore (equivalent to 10% of India’s GDP) aimed towards making the country ready for the tough competition in the global supply chain and empowering the poor, labourers, migrants who have been adversely affected by COVID-19. Following this announcement, the Finance Minister, Ms. Nirmala Sitharaman, in five press conferences, announced the detailed measures under the economic package. The economic package includes earlier measures taken by the government to support the citizens and businesses of India. A break-up of the package is presented in Table 1.
Table 1: Break-up of stimulus from Aatma Nirbhar Bharat Abhiyaan package
|
Item |
Key Topics covered |
Amount (in Rs crore) |
|
Stimulus from earlier measures |
Pradhan Mantri Garib Kalyan Yojana, Tax Concessions, and the Prime Minister's announcement for health sector |
1,92,800 |
|
Part 1 |
Business including Micro, Small and Medium Enterprises (MSMEs) |
5,94,550 |
|
Part 2 |
Poor people including migrants and farmers. |
3,10,000 |
|
Part 3 |
Agriculture and allied sectors. |
1,50,000 |
|
Part 4 and Part 5 |
Part 4: Coal and mineral sectors, defence sector, civil Aviation, airports and aircraft Maintenance, Repair and Overhaul (MRO), power sector, social infrastructures, space, atomic energy. Part 5: Government reforms and other provisions including public health and education, additional allocation to MGNREGS |
48,100 |
|
Sub Total |
|
1,295,400 |
|
RBI Measures (Actual) |
Reduction in Cash Reserve Ratio (CRR), Special Liquidity Facility (SLF) for mutual funds, Special refinance facilities for NABARD, SIDBI and NHB at policy repo rate |
8,01,603 |
|
Grand Total |
|
20,97,053 |
Note: Part 1, 2, 3, 4, 5 in the table above represents the five press conferences conducted by the Finance Minister to announce the details of the economic package.
Source: Presentation made by Union Finance & Corporate Affairs Minister Smt. Nirmala Sitharaman under Aatmanirbhar Bharat Abhiyaan to support Indian economy in fight against COVID-19, Ministry of Finance, May 13, 2020, PRS.
For more information on the details of the announcements made under Aatma Nirbhar Bharat Abhiyaan, please see here.
Finance
Following the Prime Minister’s and Finance Minister’s announcements, further announcements were also made.
Lockdown 4.0
The Ministry of Home Affairs (MHA) passed an order extending the lockdown till May 31, 2020. This lockdown will have more relaxations compared to earlier lockdowns.
Zoning of areas
The new guidelines have authorised states/union territories (UTs) to define the red, green and orange zones based on the parameters prescribed by the Health Ministry. The states/UTs can define a district, or a municipal corporation/ municipality or even smaller administrative units such as sub-divisions, etc. as a red or green or orange zone.
The prohibition of certain activities or restrictions in various zones within a state will be at the discretion of the state/union territory as deemed necessary.
Prohibited Activities
Some activities will continue to remain prohibited throughout the country. These include:
Online/ distance learning is encouraged and permitted; and, restaurants will be allowed to operate kitchens for home delivery of food items.
National Directives for COVID Management
The Ministry of Home Affairs issued the National Directives for COVID Management, which apply to public places and work places. As per these guidelines:
Guidelines for workplaces include:
Aarogya Setu
The District authorities will ensure installation of the Aarogya Setu application on compatible mobile phones of all individuals and will have to regularly update their health status on the app.
Aarogya Setu Data access and knowledge sharing protocol, 2020
The Ministry of Electronics and Information Technology, Government of India issued a notification on the data access and knowledge sharing protocol, 2020 in reference to the Aarogya Setu mobile application. The protocol will: (i) ensure secure collection of data by the mobile application, (ii) protect the personal data of individuals, and (iii) ensure efficient use and sharing of personal or non-personal data of the application users. The protocol provides principles for: (i) collection and processing of response data, (ii) sharing of response data, (iii) obligations of entities with whom the data will be shared, and (iv) sharing of data for research purpose. A sunset clause is applicable to the protocol subjecting it to a review after 6 months unless there is any extension of sunset clause in wake of the pandemic.
Travel and Movement
Health
The Ministry of Health and Family Welfare issued: (i) updated containment plan on COVID-19, and (ii) updated containment plan for large outbreaks of COVID 19. These plans provide information on various scenarios of COVID-19 and strategies to control the spread of the disease including definitions, action plans and specific details on (i) identification of containment zones and buffer zones; (ii) perimeter control; (iii) support from various stakeholders such as testing laboratories and hospitals; (iv) pharamaceutical and non-pharmaceutical interventions; and (v) risk communication.
For more information on the spread of COVID-19 and the central and state government response to the pandemic, please see here.
Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts. It had first recommended these names earlier this year and in August last year, but these appointments were not made. The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts). Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases. As of today, more than four crore cases are pending across all courts in India. In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.
High vacancy of judges across courts
Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges. Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually. However, vacancies persist due to insufficient appointments (see Figures 1 and 2). Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts).
|
Figure 1: Vacancy of judges in High Courts |
Figure 2: Vacancy of judges in subordinate courts |
|
|
|
|
Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS. |
|
As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34). Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098). Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges. In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3). The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled.
|
Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021)
|
|
Source: Vacancy Statement, Department of Justice; PRS. |
Appointments of High Court judges are guided by a memorandum of procedure. As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs. However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts. Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court. No timeline is prescribed for this stage of the appointment process. In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.
As of today, over 3.6 crore cases are pending before subordinate courts in India. As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts. Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4). Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.
For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.
Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)
|
|
|
Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS. |
How many judges do we need?
The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary. Lack of adequate number of judges means a greater workload per judge. Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts. Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1).
Table 1: Methods recommended for calculating the required number of judges for subordinate courts
|
Method of calculation |
Recommendation and its status |
|
Judge-to-population ratio: optimum number of judges per million population |
The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people. This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002). For 2020, the judge-to-population ratio was 21 judges per million population. Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts. |
|
Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge |
The Law Commission of India (2014) proposed this method. It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions. |
|
Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions |
The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method. It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts. In 2017, the Supreme Court accepted this model. |
|
Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study |
Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts. It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court. The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi. |
Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.
