![](/images/main_logo.png)
As of May 29, 2020, there are 1,65,799 confirmed cases of COVID-19 in India. 47,352 new cases have been registered in the last week (since May 22). Out of the confirmed cases so far, 71,106 patients have been cured/discharged and 4,706 have died. Most cases are in the state of Maharashtra (59,546) followed by the states of Tamil Nadu (19,372), Delhi (16,281) and Gujarat (15,562).
With the spread of COVID-19, the central government initially undertook many measures to contain the spread of the pandemic, including restrictions on travel and movement through national lockdown. With gradual resumption of activities, the central government has recently announced measures to ease restrictions on travel and movement. Further, the government has continued to announce policy decisions to ease the financial stress caused by the pandemic, and to contain further spread of the pandemic. In this blog post, we summarise some of the key measures taken by the central government in this regard between May 23 and May 29, 2020.
Figure 1: Day wise number of COVID-19 cases in the country
Source: Ministry of Health and Family Welfare; PRS.
Finance
RBI announces additional measures to ease financial stress caused by COVID-19
On May 22, the Reserve Bank of India (RBI) issued a statement with various development and regulatory policies to ease the financial stress caused by COVID-19. These measures include: (i) improving liquidity in the market; (ii) support to exports and imports; and (iii) easing capital financing. Subsequently, following measures have been notified by the RBI:
Travel and Movement
Domestic Air travel resumes; fare limits set by government
Domestic passenger air travel has been resumed in a phased manned (with one-third capacity of operations) from May 25, 2020 based on the announcement of the Ministry of Civil Aviation on May 21. To ensure that airlines do not charge excessive fare and to ensure that journey is only for essential purposes, the Ministry of Civil Aviation issued an order to limit the minimum and maximum fare that airlines can charge from the passenger. The routes have been divided in seven sectors based on the approximate duration of the flight. For routes with shortest duration (for example, Delhi to Chandigarh), the minimum and maximum fare will be Rs 2,000 and Rs 6,000, respectively. For routes with the longest duration (for example, Delhi to Thiruvananthapuram), the minimum and maximum fare will be Rs 6,500 and Rs 18,600, respectively.
Further, the Ministry announced that all operational routes under the Regional Connectivity (UDAN) Scheme with up to 500 km of length or operational routes in priority areas (North East region, hilly states or islands) are permitted to resume operations. This is in addition to the one-third capacity of operations announced earlier.
Health
Guidelines for international arrivals issued
The Ministry of Health and Family Welfare issued guidelines for international arrivals. All travellers are required to give an undertaking that they will undergo a 14-day mandatory institutional quarantine at their own cost (7 days in institutional quarantine followed by a 7-day isolation at home). In emergency cases (such as pregnancy or death in the family), home quarantine will be permitted. Use of Aarogya Setu app will be mandatory in such cases. Only asymptomatic passengers will be allowed to board (flight/ship) after thermal screening. On arrival, thermal screening will be carried out for all passengers. The passengers found to be symptomatic will be isolated and taken to a medical facility.
Movement of migrant labourers
Supreme Court gives an interim order regarding problems of migrant labourers
The Supreme Court of India took cognisance of the problems of migrant labourers who have been stranded in different parts of the country. In its order, the Court observed that there are lapses being noticed in the process of registration, transportation and in providing food and shelter to the migrant workers. In view of these difficulties, the Court issued the following interim directions:
The Court directed the central and state governments to produce record of all necessary details such as the number of migrant workers, the plan to transport them to their destination, and the mechanism of registration.
Other measures
PM CARES Fund included in the list of CSR eligible activities
The Ministry of Corporate Affairs notified the inclusion of PM CARES fund in the list of activities eligible for Corporate Social Responsibility (CSR) under the Companies Act, 2013. Under the Act, companies with net worth, turnover or profits above a specified amount are required to spend 2% of their average net profits in the last three financial years towards CSR activities. This measure will come into effect retrospectively from March 28, 2020, when the fund was setup.
For more information on the spread of COVID-19 and the central and state government response to the pandemic, please see here.
Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts. It had first recommended these names earlier this year and in August last year, but these appointments were not made. The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts). Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases. As of today, more than four crore cases are pending across all courts in India. In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.
High vacancy of judges across courts
Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges. Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually. However, vacancies persist due to insufficient appointments (see Figures 1 and 2). Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts).
Figure 1: Vacancy of judges in High Courts |
Figure 2: Vacancy of judges in subordinate courts |
|
|
Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS. |
As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34). Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098). Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges. In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3). The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled.
Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021) |
Source: Vacancy Statement, Department of Justice; PRS. |
Appointments of High Court judges are guided by a memorandum of procedure. As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs. However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts. Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court. No timeline is prescribed for this stage of the appointment process. In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.
As of today, over 3.6 crore cases are pending before subordinate courts in India. As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts. Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4). Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.
For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.
Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)
|
Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS. |
How many judges do we need?
The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary. Lack of adequate number of judges means a greater workload per judge. Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts. Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1).
Table 1: Methods recommended for calculating the required number of judges for subordinate courts
Method of calculation |
Recommendation and its status |
Judge-to-population ratio: optimum number of judges per million population |
The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people. This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002). For 2020, the judge-to-population ratio was 21 judges per million population. Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts. |
Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge |
The Law Commission of India (2014) proposed this method. It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions. |
Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions |
The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method. It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts. In 2017, the Supreme Court accepted this model. |
Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study |
Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts. It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court. The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi. |
Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.