Earlier this week, Lok Sabha passed the Bill that provides for the allocation of coal mines that were cancelled by the Supreme Court last year. In light of this development, this post looks at the issues surrounding coal block allocations and what the 2015 Bill seeks to achieve.
In September 2014, the Supreme Court cancelled the allocations of 204 coal blocks. Following the Supreme Court judgement, in October 2014, the government promulgated the Coal Mines (Special Provisions) Ordinance, 2014 for the allocation of the cancelled coal mines. The Ordinance, which was replaced by the Coal Mines (Special Provisions) Bill, 2014, could not be passed by Parliament in the last winter session, and lapsed. The government then promulgated the Coal Mines (Special Provisions) Second Ordinance, 2014 on December 26, 2014. The Coal Mines (Special Provisions) Bill, 2015 replaces the second Ordinance and was passed by Lok Sabha on March 4, 2015. Why is coal considered relevant? Coal mining in India has primarily been driven by the need for energy domestically. About 55% of the current commercial energy use is met by coal. The power sector is the major consumer of coal, using about 80% of domestically produced coal. As of April 1, 2014, India is estimated to have a cumulative total of 301.56 billion tonnes of coal reserves up to a depth of 1200 meters. Coal deposits are mainly located in Jharkhand, Odisha, Chhattisgarh, West Bengal, Madhya Pradesh, Andhra Pradesh and Maharashtra. How is coal regulated? The Ministry of Coal has the overall responsibility of managing coal reserves in the country. Coal India Limited, established in 1975, is a public sector undertaking, which looks at the production and marketing of coal in India. Currently, the sector is regulated by the ministry’s Coal Controller’s Organization. The Coal Mines (Nationalisation) Act, 1973 (CMN Act) is the primary legislation determining the eligibility for coal mining in India. The CMN Act allows private Indian companies to mine coal only for captive use. Captive mining is the coal mined for a specific end-use by the mine owner, but not for open sale in the market. End-uses currently allowed under the CMN Act include iron and steel production, generation of power, cement production and coal washing. The central government may notify additional end-uses. How were coal blocks allocated so far? Till 1993, there were no specific criteria for the allocation of captive coal blocks. Captive mining for coal was allowed in 1993 by amendments to the CMN Act. In 1993, a Screening Committee was set up by the Ministry of Coal to provide recommendations on allocations for captive coal mines. All allocations to private companies were made through the Screening Committee. For government companies, allocations for captive mining were made directly by the ministry. Certain coal blocks were allocated by the Ministry of Power for Ultra Mega Power Projects (UMPP) through tariff based competitive bidding (bidding for coal based on the tariff at which power is sold). Between 1993 and 2011, 218 coal blocks were allocated to both public and private companies under the CMN Act. What did the 2014 Supreme Court judgement do? In August 2012, the Comptroller and Auditor General of India released a report on the coal block allocations. CAG recommended that the allocation process should be made more transparent and objective, and done through competitive bidding. Following this report, in September 2012, a Public Interest Litigation matter was filed in the Supreme Court against the coal block allocations. The petition sought to cancel the allotment of the coal blocks in public interest on grounds that it was arbitrary, illegal and unconstitutional. In September 2014, the Supreme Court declared all allocations of coal blocks, made through the Screening Committee and through Government Dispensation route since 1993, as illegal. It cancelled the allocation of 204 out of 218 coal blocks. The allocations were deemed illegal on the grounds that: (i) the allocation procedure followed by the Screening Committee was arbitrary, and (ii) no objective criterion was used to determine the selection of companies. Further, the allocation procedure was held to be impermissible under the CMN Act. Among the 218 coal blocks, 40 were under production and six were ready to start production. Of the 40 blocks under production, 37 were cancelled and of the six ready to produce blocks, five were cancelled. However, the allocation to Ultra Mega Power Projects, which was done via competitive bidding for lowest tariffs, was not declared illegal. What does the 2015 Bill seek to do? Following the cancellation of the coal blocks, concerns were raised about further shortage in the supply of coal, resulting in more power supply disruptions. The 2015 Bill primarily seeks to allocate the coal mines that were declared illegal by the Supreme Court. It provides details for the auction process, compensation for the prior allottees, the process for transfer of mines and details of authorities that would conduct the auction. In December 2014, the ministry notified the Coal Mines (Special Provisions) Rules, 2014. The Rules provide further guidelines in relation to the eligibility and compensation for prior allottees. How is the allocation of coal blocks to be carried out through the 2015 Bill? The Bill creates three categories of mines, Schedule I, II and III. Schedule I consists of all the 204 mines that were cancelled by the Supreme Court. Of these mines, Schedule II consists of all the 42 mines that are under production and Schedule III consists of 32 mines that have a specified end-use such as power, iron and steel, cement and coal washing. Schedule I mines can be allocated by way of either public auction or allocation. For the public auction route any government, private or joint venture company can bid for the coal blocks. They can use the coal mined from these blocks for their own consumption, sale or for any other purpose as specified in their mining lease. The government may also choose to allot Schedule I mines to any government company or any company that was awarded a power plant project through competitive bidding. In such a case, a government company can use the coal mined for own consumption or sale. However, the Bill does not provide clarity on the purpose for which private companies can use the coal. Schedule II and III mines are to be allocated by way of public auction, and the auctions have to be completed by March 31, 2015. Any government company, private company or a joint venture with a specified end-use is eligible to bid for these mines. In addition, the Bill also provides details on authorities that would conduct the auction and allotment and the compensation for prior allottees. Prior allottees are not eligible to participate in the auction process if: (i) they have not paid the additional levy imposed by the Supreme Court; or (ii) if they are convicted of an offence related to coal block allocation and sentenced to imprisonment of more than three years. What are some of the issues to consider in the 2015 Bill? One of the major policy shifts the 2015 Bill seeks to achieve is to enable private companies to mine coal in the future, in order to improve the supply of coal in the market. Currently, the coal sector is regulated by the Coal Controller’s Organization, which is under the Ministry of Coal. The Bill does not establish an independent regulator to ensure a level playing field for both private and government companies bidding for auction of mines to conduct coal mining operations. In the past, when other sectors have opened up to the private sector, an independent regulatory body has been established beforehand. For example, the Telecom Regulatory Authority of India, an independent regulatory body, was established when the telecom sector was opened up for private service providers. The Bill also does not specify any guidelines on the monitoring of mining activities by the new allottees. While the Bill provides broad details of the process of auction and allotment, the actual results with regards to money coming in to the states, will depend more on specific details, such as the tender documents and floor price. It is also to be seen whether the new allotment process ensures equitable distribution of coal blocks among the companies and creates a fair, level-playing field for them. In the past, the functioning of coal mines has been delayed due to delays in land acquisition and environmental clearances. This Bill does not address these issues. The auctioning of coal blocks resulting in improving the supply of coal, and in turn addressing the problem of power shortage in the country, will also depend on the efficient functioning of the mines, in addition to factors such as transparent allocations.
The Consumer Protection Bill, 2018 was introduced in Lok Sabha in January 2018. The Bill replaces the Consumer Protection Act, 1986. Previously in 2015, a Bill had been introduced to replace the 1986 Act. The 2015 Bill acknowledged that the rapid change in consumer markets, introduction of practices such as misleading advertisements, and new modes of transactions (online, teleshopping, etc.) had necessitated the need for a new law. The Bill was subsequently referred to a Standing Committee, which recommended several changes to it. The Bill was withdrawn and replaced with the Consumer Protection Bill, 2018. The Bill is listed for passage in the ongoing Monsoon Session. In this post, we analyse the Bill in its current form.
How is the 2018 Bill different from the 1986 Act?
The Bill adds various provisions for consumer protection that were absent in the 1986 Act. Key among them are the provisions on product liability and unfair contracts. Under product liability, when a consumer suffers an injury, property damage or death due to a defect in a product or service, he can file a claim for compensation under product liability. The Bill outlines cases in which the product manufacturer, service provider and seller will be held guilty under product liability. Under the proposed law, to claim product liability, an aggrieved consumer has to prove any one of the conditions mentioned in the Bill with regard to a manufacturer, service provider and seller, as the case may be.
An unfair contract has been defined as a contract between a consumer and manufacturer/ service provider if it causes significant change in consumer rights. Unfair contracts cover six terms, such as payment of excessive security deposits in an arrangement, disproportionate penalty for a breach, and unilateral termination without cause. The consumer courts being set up under the Bill will determine contract terms to be unfair and declare them null and void.
What are the different bodies being set up under the Bill?
The Bill sets up Consumer Protection Councils as advisory bodies, who will advise on protection and promotion of consumer rights. However, it does not make it clear who these Councils will render advise to. Under the 1986 Act, the Consumer Protection Councils have the responsibility to protect and promote consumer rights.
To promote, protect, and enforce consumer rights, the Bill is setting up a regulatory body, known as the Central Consumer Protection Authority. This Authority can also pass orders to prevent unfair and restrictive trade practices, such as selling goods not complying with standards, and impose penalties for false and misleading advertisements.
The Bill also sets up the Consumer Disputes Redressal Commissions (known as consumer courts) at the district, state and national levels. These Commissions will adjudicate a broad range of complaints, including complaints on defective goods and deficient services of varying values. These Commissions are also present under the 1986 Act. However, their pecuniary jurisdiction (amount up to which they can hear complaints) has been revised under the Bill. The Bill also adds a provision for alternate dispute redressal mechanism. As part of this, mediation cells will be attached with the Consumer Disputes Redressal Commissions.
What are the penal provisions under the Bill?
The Bill increases penalties for different offences specified in it. It also adds penalties for offences such as issuing misleading advertisements, and manufacturing and selling adulterated or spurious goods. For example, in case of false and misleading advertisements, the Central Consumer Protection Authority can impose a penalty of up to Rs 10 lakh on a manufacturer or an endorser. For a subsequent offence, the fine may extend to Rs 50 lakh. The manufacturer can also be punished with imprisonment of up to two years, which may extend to five years for every subsequent offence. The Authority can also prohibit the endorser of a misleading advertisement from endorsing any particular product or service for a period of up to one year. For every subsequent offence, the period of prohibition may extend to three years. There are certain exceptions when an endorser will not be held liable for such a penalty.
Are there any issues to think about in the Bill?
The 2018 Bill is a marked improvement over the 2015 Bill and addresses several issues in the 2015 Bill. However, two major issues with regard to the Consumer Disputes Redressal Commissions remain. We discuss them below.
First issue is with regard to the composition of these Commissions. The Bill specifies that the Commissions will be headed by a ‘President’ and will comprise other members. However, the Bill delegates the power of deciding the qualifications of the President and members to the central government. It also does not specify that the President or members should have minimum judicial qualifications. This is in contrast with the existing Consumer Protection Act, 1986, which states that the Commissions at various levels will be headed by a person qualified to be a judge. The 1986 Act also specifies the minimum qualification of members.
Under the current Bill, if the Commissions were to have only non-judicial members, it may violate the principle of separation of powers between the executive and the judiciary. Since these Commissions are adjudicating bodies and will look at consumer dispute cases, it is unclear how a Commission that may comprise only non-judicial members will undertake this function.
Second issue is with regard to the method of appointment of members of the Commissions. The Bill permits the central government to notify the method of appointment of members of the Commissions. It does not require that the selection involve members from the higher judiciary. It may be argued that allowing the executive to determine the appointment of the members of Commissions could affect the independent functioning of the Commissions. This provision is also at variance with the 1986 Act. Under the Act, appointment of members to these Commissions is done through a selection committee. These section committees comprise a judicial member.
As mentioned previously, the Commissions are intended to be quasi-judicial bodies, while the government is part of the executive. There may be instances where the government is a party to a dispute relating to deficiency in service provided by a government enterprise, for e.g., the Railways. In such a case, there would be a conflict of interest as the government would be a party to the dispute before the Commissions and will also have the power to appoint members to the Commission.
