Earlier this week, Lok Sabha passed the Bill that provides for the allocation of coal mines that were cancelled by the Supreme Court last year. In light of this development, this post looks at the issues surrounding coal block allocations and what the 2015 Bill seeks to achieve.
In September 2014, the Supreme Court cancelled the allocations of 204 coal blocks. Following the Supreme Court judgement, in October 2014, the government promulgated the Coal Mines (Special Provisions) Ordinance, 2014 for the allocation of the cancelled coal mines. The Ordinance, which was replaced by the Coal Mines (Special Provisions) Bill, 2014, could not be passed by Parliament in the last winter session, and lapsed. The government then promulgated the Coal Mines (Special Provisions) Second Ordinance, 2014 on December 26, 2014. The Coal Mines (Special Provisions) Bill, 2015 replaces the second Ordinance and was passed by Lok Sabha on March 4, 2015. Why is coal considered relevant? Coal mining in India has primarily been driven by the need for energy domestically. About 55% of the current commercial energy use is met by coal. The power sector is the major consumer of coal, using about 80% of domestically produced coal. As of April 1, 2014, India is estimated to have a cumulative total of 301.56 billion tonnes of coal reserves up to a depth of 1200 meters. Coal deposits are mainly located in Jharkhand, Odisha, Chhattisgarh, West Bengal, Madhya Pradesh, Andhra Pradesh and Maharashtra. How is coal regulated? The Ministry of Coal has the overall responsibility of managing coal reserves in the country. Coal India Limited, established in 1975, is a public sector undertaking, which looks at the production and marketing of coal in India. Currently, the sector is regulated by the ministry’s Coal Controller’s Organization. The Coal Mines (Nationalisation) Act, 1973 (CMN Act) is the primary legislation determining the eligibility for coal mining in India. The CMN Act allows private Indian companies to mine coal only for captive use. Captive mining is the coal mined for a specific end-use by the mine owner, but not for open sale in the market. End-uses currently allowed under the CMN Act include iron and steel production, generation of power, cement production and coal washing. The central government may notify additional end-uses. How were coal blocks allocated so far? Till 1993, there were no specific criteria for the allocation of captive coal blocks. Captive mining for coal was allowed in 1993 by amendments to the CMN Act. In 1993, a Screening Committee was set up by the Ministry of Coal to provide recommendations on allocations for captive coal mines. All allocations to private companies were made through the Screening Committee. For government companies, allocations for captive mining were made directly by the ministry. Certain coal blocks were allocated by the Ministry of Power for Ultra Mega Power Projects (UMPP) through tariff based competitive bidding (bidding for coal based on the tariff at which power is sold). Between 1993 and 2011, 218 coal blocks were allocated to both public and private companies under the CMN Act. What did the 2014 Supreme Court judgement do? In August 2012, the Comptroller and Auditor General of India released a report on the coal block allocations. CAG recommended that the allocation process should be made more transparent and objective, and done through competitive bidding. Following this report, in September 2012, a Public Interest Litigation matter was filed in the Supreme Court against the coal block allocations. The petition sought to cancel the allotment of the coal blocks in public interest on grounds that it was arbitrary, illegal and unconstitutional. In September 2014, the Supreme Court declared all allocations of coal blocks, made through the Screening Committee and through Government Dispensation route since 1993, as illegal. It cancelled the allocation of 204 out of 218 coal blocks. The allocations were deemed illegal on the grounds that: (i) the allocation procedure followed by the Screening Committee was arbitrary, and (ii) no objective criterion was used to determine the selection of companies. Further, the allocation procedure was held to be impermissible under the CMN Act. Among the 218 coal blocks, 40 were under production and six were ready to start production. Of the 40 blocks under production, 37 were cancelled and of the six ready to produce blocks, five were cancelled. However, the allocation to Ultra Mega Power Projects, which was done via competitive bidding for lowest tariffs, was not declared illegal. What does the 2015 Bill seek to do? Following the cancellation of the coal blocks, concerns were raised about further shortage in the supply of coal, resulting in more power supply disruptions. The 2015 Bill primarily seeks to allocate the coal mines that were declared illegal by the Supreme Court. It provides details for the auction process, compensation for the prior allottees, the process for transfer of mines and details of authorities that would conduct the auction. In December 2014, the ministry notified the Coal Mines (Special Provisions) Rules, 2014. The Rules provide further guidelines in relation to the eligibility and compensation for prior allottees. How is the allocation of coal blocks to be carried out through the 2015 Bill? The Bill creates three categories of mines, Schedule I, II and III. Schedule I consists of all the 204 mines that were cancelled by the Supreme Court. Of these mines, Schedule II consists of all the 42 mines that are under production and Schedule III consists of 32 mines that have a specified end-use such as power, iron and steel, cement and coal washing. Schedule I mines can be allocated by way of either public auction or allocation. For the public auction route any government, private or joint venture company can bid for the coal blocks. They can use the coal mined from these blocks for their own consumption, sale or for any other purpose as specified in their mining lease. The government may also choose to allot Schedule I mines to any government company or any company that was awarded a power plant project through competitive bidding. In such a case, a government company can use the coal mined for own consumption or sale. However, the Bill does not provide clarity on the purpose for which private companies can use the coal. Schedule II and III mines are to be allocated by way of public auction, and the auctions have to be completed by March 31, 2015. Any government company, private company or a joint venture with a specified end-use is eligible to bid for these mines. In addition, the Bill also provides details on authorities that would conduct the auction and allotment and the compensation for prior allottees. Prior allottees are not eligible to participate in the auction process if: (i) they have not paid the additional levy imposed by the Supreme Court; or (ii) if they are convicted of an offence related to coal block allocation and sentenced to imprisonment of more than three years. What are some of the issues to consider in the 2015 Bill? One of the major policy shifts the 2015 Bill seeks to achieve is to enable private companies to mine coal in the future, in order to improve the supply of coal in the market. Currently, the coal sector is regulated by the Coal Controller’s Organization, which is under the Ministry of Coal. The Bill does not establish an independent regulator to ensure a level playing field for both private and government companies bidding for auction of mines to conduct coal mining operations. In the past, when other sectors have opened up to the private sector, an independent regulatory body has been established beforehand. For example, the Telecom Regulatory Authority of India, an independent regulatory body, was established when the telecom sector was opened up for private service providers. The Bill also does not specify any guidelines on the monitoring of mining activities by the new allottees. While the Bill provides broad details of the process of auction and allotment, the actual results with regards to money coming in to the states, will depend more on specific details, such as the tender documents and floor price. It is also to be seen whether the new allotment process ensures equitable distribution of coal blocks among the companies and creates a fair, level-playing field for them. In the past, the functioning of coal mines has been delayed due to delays in land acquisition and environmental clearances. This Bill does not address these issues. The auctioning of coal blocks resulting in improving the supply of coal, and in turn addressing the problem of power shortage in the country, will also depend on the efficient functioning of the mines, in addition to factors such as transparent allocations.
Recently, the Indian Railways announced rationalisation of freight fares. This rationalisation will result in an 8.75% increase in freight rates for major commodities such as coal, iron and steel, iron ore, and raw materials for steel plants. The freight rates were rationalised to ensure additional revenue generation across the network. An additional revenue of Rs 3,344 crore is expected from such rationalisation, which will be utilised to improve passenger amenities. In addition, the haulage charge of containers has been increased by 5% and the freight rates of other small goods have been increased by 8.75%. Freight rates have not been increased for goods such as food grains, flours, pulses, fertilisers, salt, and sugar, cement, petroleum, and diesel. In light of this, we discuss some issues around Railways’ freight pricing.
Railways’ sources of internal revenue
Railways earns its internal revenue primarily from passenger and freight traffic. In 2016-17 (latest actual figures available), freight and passenger traffic contributed to about 63% and 28% of the internal revenue, respectively. The remaining is earned from miscellaneous sources such as parcel service, coaching receipts, and platform tickets.
Freight traffic: Railways majorly transports bulk freight, and the freight basket has mostly been limited to include raw materials for certain industries such as power plants, and iron and steel plants. It generates most of its freight revenue from the transportation of coal (43%), followed by cement (8%), food-grains (7%), and iron and steel (7%). In 2018-19, Railways expects to earn Rs 1,21,950 crore from its freight traffic.
Passenger traffic: Passenger traffic is broadly divided into two categories: suburban and non-suburban traffic. Suburban trains are passenger trains that cover short distances of up to 150 km, and help move passengers within cities and suburbs. Majority of the passenger revenue (94% in 2017-18) comes from the non-suburban traffic (or the long-distance trains).
Within non-suburban traffic, second class (includes sleeper class) contributes to 67% of the non-suburban revenue. AC class (includes AC 3-tier, AC Chair Car and AC sleeper) contributes to 32% of the non-suburban revenue. The remaining 1% comes from AC First Class (includes Executive class and First Class).
Railways’ ability to generate its own revenue has been slowing
The growth rate of Railways’ earnings from its core business of running freight and passenger trains has been declining. This is due to a decline in the growth of both freight and passenger traffic. Some of the reasons for such decline include:
Freight traffic growth has been declining, and is limited to a few items
Growth of freight traffic has been declining over the last few years. It has declined from around 8% in the mid-2000s to a 4% negative growth in mid-2010s, before an estimated recovery to about 5% now.
The National Transport Development Policy Committee (2014) had noted various issues with freight transportation on railways. For example, Indian Railways does not have an institutional arrangement to attract and aggregate traffic of smaller parcel size. Further, freight services are run with a focus on efficiency instead of customer satisfaction. Consequently, it has not been able to capture high potential markets such as FMCGs, hazardous materials, or automobiles and containerised cargo. Most of such freight is transported by roads.
The freight basket is also limited to a few commodities, most of which are bulk in nature. For example, coal contributes to about 43% of freight revenue and 25% of the total internal revenue. Therefore, any shift in transport patterns of any of these bulk commodities could affect Railways’ finances significantly.
For example, if new coal based power plants are set up at pit heads (source of coal), then the need for transporting coal through Railways would decrease. If India’s coal usage decreases due to a shift to more non-renewable sources of energy, it will reduce the amount of coal being transported. Such situations could have a significant adverse impact on Railways’ revenue.
Freight traffic cross-subsidises passenger traffic
In 2014-15, while Railways’ freight business made a profit of about Rs 44,500 crore, its passenger business incurred a net loss of about Rs 33,000 crore.17 The total passenger revenue during this period was Rs 49,000 crore. This implies that losses in the passenger business are about 67% of its revenue. Therefore, in 2014-15, for every one rupee earned in its passenger business, Indian Railways ended up spending Rs 1.67.
These losses occur across both suburban and non-suburban operations, and are primarily caused due to: (i) passenger fares being lower than the costs, and (ii) concessions to various categories of passengers. According to the NITI Aayog (2016), about 77% to 80% of these losses are contributed by non-suburban operations (long-distance trains). Concessions to various categories of passengers contribute to about 4% of these losses, and the remaining (73-76%) is due to fares being lower than the system costs.
The NITI Aayog (2016) had noted that Railways ends up using profits from its freight business to provide for such losses in the passenger segment, and also to manage its overall financial situation. Such cross-subsidisation has resulted in high freight tariffs. The NTDPC (2014) had noted that, in several countries, passenger fares are either higher or almost equal as freight rates. However, in India, the ratio of passenger fare to freight rate is about 0.3.
Impact of increasing freight rates
The recent freight rationalisation further increases the freight rates for certain key commodities by 8.75%, with an intention to improve passenger amenities. Higher freight tariffs could be counter-productive towards growth of traffic in the segment. The NTDPC report had noted that due to such high tariffs, freight traffic has been moving to other modes of transport. Further, the higher cost of freight segment is eventually passed on to the common public in the form of increased costs of electricity, steel, etc. Various experts have recommended that Railways should consider ways to rationalise freight and passenger tariff distortions in a way to reduce such cross-subsidisation.
For a detailed analysis of Railways revenue and infrastructure, refer to our report on ‘State of Indian Railways’.
