The recent order of the ministry of environment and forests (MoE&F) rejecting the application for grant of forest clearance to the Orissa Mining Company (the Vedanta project) has raised a number of important questions. The order cited the company’s non-compliance with a number of laws. But the Vedanta case is just one example. There are several projects in the country where similar issues are relevant. The question really is, are the multiple laws that are applicable in such cases in harmony with each other or are they working at cross purposes? In a sector such as mining, doing business is inherently complicated. There are at least four broad aspects that need to be addressed—obtaining mining licences, securing environmental clearances, acquiring land, and rehabilitation of people affected by such projects. We take a look at each of the four broad areas, to understand how the applicable laws interact with one another. Obtaining mining licences Doing business in the mining sector first entails obtaining a licence for activities such as prospecting and mining. The Mines and Minerals (Development and Regulation) Act, 1957, lays down the framework for any prospecting, leasing or mining activity to be carried out for specified minerals, and the licences that need to be obtained. The Act allows the central government to frame the rules and conditions applicable both for grant of licences and for the actual activity carried out by enterprises. The licensing authority for mining activities is the state government. Securing environment clearances Environmental clearances for industrial activities are governed by a number of laws. Most activities require clearances under the Environment (Protection) Act, 1986. Additionally, for activities in forest areas, clearance is also required under the Forest (Conservation) Act, 1980. Acts pertaining to wildlife protection, bio-diversity and the quality of air and water may also be applicable. The Environment (Protection) Act, 1986, enables the central government to take measures for “protecting and improving the quality of the environment and preventing, controlling and abating environmental pollution”. These measures may include (among others) (a) laying down standards for the quality of the environment, (b) areas in which industries or operations may not be carried out, or carried out subject to certain safeguards. The rules framed under the Act make it compulsory for all new projects to take prior environmental clearance. For a specified category of activities clearance has to be obtained from the MoE&F, while for others, clearance has to be obtained from State Environment Impact Assessment Authorities (SEIAAs). The Forest (Conservation) Act, 1980, prohibits state governments and other authorities from any unauthorised change in the status of areas declared to be reserved forests, and any diversion of forests for non-forest purposes. It prohibits felling of trees within forest areas. Any such action has to be undertaken with the prior permission of the central government. To divert any forest area for non-forest purposes, state governments have to submit formal proposals to the Centre. State governments also have to show proposals for compensatory afforestation. Acquiring land for the project Acquiring land for projects has become increasingly contentious in recent years. The Land Acquisition Act of 1894 appears to have outlived its utility, which led the UPA-1 to introduce a Bill in the Parliament to bring a new legal framework to facilitate land acquisition. The Bill tried to address several critical aspects of land acquisition. It tried to redefine ‘public purpose’ somewhat more strictly than in the existing Act. ‘Public purpose’ was redefined to include defence purposes, infrastructure projects or for any project useful to the general public where 70% of the land has already been purchased. For acquisitions by companies, the Bill mandated that 70% of the land will have to be acquired directly from the land owners at market prices and that the government would step in under the Act to acquire the remaining 30% for the project. The Bill also aimed to provide for cases resulting in large-scale displacement. It stated that in such cases a social impact assessment study must be conducted. Tribals, forest dwellers and those with tenancy rights were also made eligible for compensation. It also mandated that the intended use of the land being acquired and the current market value of the land would have to be considered for determining compensation. The Bill lapsed when the Lok Sabha was dissolved in 2009. It is not known when the government proposes to reintroduce a Bill in the Parliament to address this issue of land acquisition. Rights of project-affected people When large projects are planned and land is acquired for those, people are often displaced from the project areas and need to be rehabilitated appropriately. The UPA-1 had introduced a Bill in the Parliament to create a legal framework for rehabilitation of project-affected people. However, the proposed Rehabilitation and Resettlement Bill, 2007, lapsed when the Lok Sabha was dissolved before the last general elections. But the UPA-1 government managed to pass a highly contested Bill that recognised the rights of scheduled tribes and other traditional forest dwellers. The Scheduled Tribes and Other Traditional Forest Dwellers (Recognition of Forest Rights) Act passed in 2006 focuses on the rights of forest-dwelling Scheduled Tribes and traditional forest dwellers. The Act seeks to recognise and vest forest rights in forest dwelling Scheduled Tribes with respect to forest land and their habitat. The Act mentions 13 separate rights given to forest dwellers. These include (a) living in the forest for habitation or for self-cultivation for livelihood, (b) right to own, use or dispose of minor forest produce, (c) right to protect and conserve any community resource that they have been traditionally protecting and (d) individual and community rights of habitat for primitive tribal groups. These rights have to be formally recorded/recognised by state governments. The Act also prevents any modification of forest rights or the resettlement of forest dwellers unless the Gram Sabha of the village consents to the proposal in writing. There are additional requirements to be met if developmental activities are to be undertaken in tribal dominated areas (defined as Scheduled Areas in the Constitution). The Panchayat (Extension into Scheduled Areas) Act, 1996, extends the part of the Constitution providing for Panchayati Raj in rural areas to Scheduled Areas. The Act requires that government authorities consult the Panchayat or the Gram Sabha before acquiring land for development projects and for rehabilitating persons affected by such projects. At a conceptual level, there is no apparent contradiction in the applicable laws and each of the laws mentioned above appear to be necessary to ensure that there is fairness for all stakeholders involved. However, a distinction has to be made between the legal principles these laws seek to enforce, and procedural formalities that need to be complied with to be on the right side of the law. Also, a closer look at these individual laws and their implementation will reveal a number of loopholes that need to be plugged to ensure that the spirit and basic principles enshrined in each law are enforced efficiently. From the point of view of the company that intends to do business in India, all this adds up to a lot of time-consuming process. This is perhaps why the Doing Business index published annually by the World Bank group ranks India at 133 out of 183 counties in terms of ease of doing business. The challenge, going forward, is for us to strengthen processes that are fair to all stakeholders, but at the same time are not unduly burdensome on the company that seeks to make investments in the mining sector. By CV Madhukar and Anirudh Burman This was published as an article in Financial Express on September 2, 2010

Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts.  It had first recommended these names earlier this year and in August last year, but these appointments were not made.  The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts).  Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases.  As of today, more than four crore cases are pending across all courts in India.   In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.

High vacancy of judges across courts

Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges.  Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually.  However, vacancies persist due to insufficient appointments (see Figures 1 and 2).  Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts). 

Figure 1: Vacancy of judges in High Courts

Figure 2: Vacancy of judges in subordinate courts

image

image

Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS.

As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34).  Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098).  Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges.  In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3).  The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled. 

Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021)

image

Source: Vacancy Statement, Department of Justice; PRS.

 

 

 

 

 

 

 

 

 

Appointments of High Court judges are guided by a memorandum of procedure.  As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs.  However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts.  Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court.  No timeline is prescribed for this stage of the appointment process.  In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.

As of today, over 3.6 crore cases are pending before subordinate courts in India.  As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts.  Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4).  Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.

For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.

Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)

image

Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS.

 

How many judges do we need?

The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary.  Lack of adequate number of judges means a greater workload per judge.  Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts.  Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1). 

Table 1: Methods recommended for calculating the required number of judges for subordinate courts

Method of calculation

Recommendation and its status

Judge-to-population ratio: optimum number of judges per million population

The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people.  This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002).  For 2020, the judge-to-population ratio was 21 judges per million population.     Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts.

Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge

The Law Commission of India (2014) proposed this method.  It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions.

Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions

The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method.     It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts.     In 2017, the Supreme Court accepted this model.

Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study

Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts.  It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court.  The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi.

Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.