The Ministry of Communications and Information Technology released three draft policies on telecommunications, information technology and electronics. The Ministry has invited comments on the draft policies, which may be sent to email@example.com. These policies have the common goal of increasing revenues and increasing global market share. However, the policies may be incompatible with the Direct Taxes Code Bill, 2010 (DTC) and India’s international obligations under the General Agreement on Tariff and Trade (GATT). Below we discuss these policies within the scope of the GATT and the DTC. The draft National Information Technology Policy, 2011 aims to formulate a fiscal structure to attract investment in the IT industry in tier II and III cities. It also seeks to prepare SMEs for a competitive environment by providing fiscal benefits. Similarly, the draft National Electronics Policy provides for fiscal incentives in manufacturing on account of infrastructure gaps relating to power, transportation etc. and to mitigate the relatively high cost of finance. The draft policy also provides preferential market access for domestically manufactured or designed electronic products including mobile devices and SIM cards. The draft National Telecom Policy seeks to provide fiscal incentives required by indigenous manufacturers of telecom products and R&D institutions. The theme of the DTC was to remove distortions arising from incentives. The detailed note annexed to the Bill states that “tax incentives are inefficient, distorting, iniquitous, impose greater compliance burden on the tax payer and on the administration, result in loss of revenue, create special interest groups, add to the complexity of the tax laws, and encourage tax avoidance and rent seeking behaviour.” It further notes that the Parliamentary Standing Committee on finance had recommended removal of exemptions other than in exceptional cases. As per the Department of Revenue, tax holidays should only be given in businesses with extremely high risks, lumpy investments and lengthy gestation periods. The DTC also removes location-based incentives as these “lead to diversion of resources to areas where there is no comparative advantage”. These also lead to tax evasion and avoidance, and huge administrative costs. The proposals to provide fiscal incentives in all three draft policies contradict the direction of the direct tax reforms. Article 3 of GATT provides that foreign products should be accorded the same treatment accorded to similar domestic products in respect of all laws, regulations and requirements affecting their internal sale, offering for sale, purchase, transportation, distribution and use. The provisions in the draft electronics policy to secure preferential market access to products manufactured in India may contravene this Article. In granting such fiscal and trade incentives, the policies may be contrary to the approach adopted in the DTC and India’s obligations under the GATT. These draft policies will have to be reconciled with tax reforms and trade obligations.
The Monetary Policy Committee (MPC) has decided to conduct an off-cycle meeting today to discuss the failure to meet the inflation target under Section 45ZN of the Reserve Bank of India Act, 1934. As per the Reserve Bank of India Act (RBI), 1934, MPC is required to meet at least four times each year, to discuss the macroeconomic issues in the country, and take policy decisions to address those. This is the second time MPC has conducted an off-cycle meeting in 2022-23. The meeting is scheduled in light of inflation being consistently high for nine consecutive months.
In this blog, we discuss what the inflation targeting framework is, examine retail and wholesale prices, and the divergence between them.
What is the inflation targeting framework, and what happens if inflation is persistently high?
In 2016, Parliament amended the RBI Act, 1934 to change the monetary policy, and introduce an inflation targeting framework. This framework prioritises price stability to achieve sustainable GDP growth. Price stability allows investors to confidently invest their money for productive activities, without worrying about it losing value. Price stability also maintains the purchasing power of consumers, i.e., the ability to purchase a good (or service) with a given amount of money.
As per the new framework, the central government, in consultation with RBI sets: (i) an inflation target, and (ii) an upper and lower tolerance level for retail inflation. The target has been set at 4%, with an upper tolerance limit of 6% and a lower tolerance limit of 2%. The upper and lower limits indicate that although it is desirable for inflation to be close to 4%, deviation between these limits is acceptable. The target and bands are revised every five years. In March 2021, the existing targets were carried forward.
Retail inflation has been above 6% for the past nine months, and it has been above 4% from October 2019 onwards (See Figure 1).
Figure 1: Consumer price index (year-on-year; in percentage)
Sources: Database on Indian Economy, Reserve Bank of India; PRS.
If inflation is above or below the prescribed limits for three quarters, RBI must submit a report to the central government explaining why prices have been rising (or falling) persistently, what will be done to correct that, and an estimate as to when the target will be achieved.
The MPC uses tools such as interest rates to control the level of inflation in the economy. One such rate is the policy repo rate, which is the rate at which RBI lends money to banks. An increase in the policy repo rate makes borrowing money more costly, and hence is expected to control inflation by reducing the money supply. MPC increased this rate from 4% in April 2022 to 4.4% in May 2022, to 4.9% in June 2022, to 5.4% in August 2022, and to 5.9% in September 2022.
Breaking down the Consumer Price Index and the Wholesale Price Index
Consumer Price Index (CPI) measures the general prices of goods and services such as food, clothing, and fuel over time. Retail inflation is calculated as the change in the CPI over a period of time. Goods and services such as petrol, food products, health, and education are considered for its calculation, which are assigned different weights (See Table 1). Between February 2022 and August 2022, the average annual inflation was 6.9%. The rise in prices of subcomponents of the CPI during this period is indicated in Table 2.
Table 1: Assigned weights for the calculation of CPI
Sources: MOSPI; PRS.
Table 2: Average inflation of some CPI components
Sources: Database on Indian Economy, RBI; PRS.
CPI is not the only index that measures inflation in an economy. The Wholesale Price Index (WPI) measures the wholesale prices of goods. A change in wholesale prices reflects wholesale inflation. Table 3 indicates the weights assigned to goods for calculating the WPI. Manufactured goods include metals, chemicals, food products, and textiles.
Primary articles (23%) include food articles, and crude petroleum and natural gas. Fuel and power (12%) include mineral oils, electricity, and coal. WPI has remained above 10% from April 2021 onwards. It reached an all-time high of 17% in May 2022. This was driven by the inflation in metals, kerosene and petroleum coke, fruits and vegetables, and palm oil.
Table 3:Assigned weights for the
Sources: Ministry of Commerce and Industry; PRS.
Why has WPI inflation been consistently above CPI inflation?
Movements in the WPI have an impact on the CPI. For almost a year and half, CPI inflation has remained below WPI inflation. However, as per the design of the indices, it is expected that CPI would remain above WPI, and that any increase in WPI would reflect in the CPI after a time lag. This is because retail prices include taxes (as a percentage of price), while wholesale prices do not. Additionally, some of the goods in WPI act as inputs in the goods considered in CPI. An increase in input prices would lead to higher retail prices after a time lag.
We discuss possible reasons for why CPI has remained below WPI for a year and a half.
Figure 2: Consumer Price Index and Wholesale Price Index
Sources: Database on Indian Economy, Reserve Bank of India; PRS.
Composition of indices
As indicated in Table 2 and 3, the composition of the two indices varies. For instance, prices of manufacture of basic metals, chemicals, and machinery grew at an average rate of 13% between February 2021 and September 2022. They contribute 7% to the WPI. These are input goods for producing final goods and services such as automobiles, which are included in the CPI. The rise in prices of transport vehicles, communication devices, fuel for transport, and housing (CPI components) rose by 6% during this period.
The Ministry of Finance has observed that wholesale prices did not feed into retail prices (from March 2021 onwards) as wholesalers absorbed the rising input costs and did not pass them on to retailers. In August 2022, it noted that as retail prices are rising now, the pass-through may occur.