Sakshi of PRS Legislative Research discusses the government's ordinance-making power in the context of the National Food Security Ordinance in an Indian Express opinion editorial. On Wednesday, the Union cabinet approved the food security ordinance. The government has already introduced a National Food Security Bill in Parliament in December 2011. Parliamentary consideration on the bill has been initiated with the standing committee submitting its recommendations and the government proposing amendments to the law. After being listed on several occasions for discussion, members of Parliament began debating the bill in the last few days of the 2013 budget session. In spite of all this, the government has chosen to promulgate an ordinance. In all likelihood, Parliament will reconvene in a few weeks for the monsoon session. In this context, it would be useful to understand the ordinance-making power of government and its usage in the recent past. Under the Constitution, the power to make laws rests with the legislature. The executive has been given the power to make laws when Parliament is not in session and "immediate action" is necessary. In such scenarios, the president can issue an ordinance on the advice of the executive, to have the same effect as an act of Parliament. In the 1980s, the Supreme Court was confronted with a case where a state government repeatedly re-promulgated ordinances that had lapsed in previous assembly sessions. This led the SC to examine the ordinance-making power of government. The SC reasserted the constitutional principle that the primary law-making power rests with the legislature and not the executive. The executive is only given the legislative power to issue an ordinance to meet an "emergent situation". Such a situation arose in 2011 when, given that students were awaiting their degrees on the completion of their course, the government issued an ordinance to grant IIIT-Kancheepuram the status of an institute of national importance so that students could be awarded their degrees. Data over the last 60 years indicates that the highest number of ordinances, 34, were passed in 1993. Over the 15th Lok Sabha (2009-2013), there have been 16 ordinances, indicating a decline in the number of ordinances being issued every year. Once an ordinance is framed, it is to be laid before Parliament within six weeks of its first sitting. Parliament is empowered to either choose to pass the ordinance as law or let it lapse. Once the ordinance is laid in Parliament, the government introduces a bill addressing the same issue. This is typically accompanied by a memorandum tabled by the government, explaining the emergent circumstances that required the issue of an ordinance. Thereafter, the bill follows the regular law-making process. If Parliament does not approve the ordinance, it ceases to exist. The drafters of the Constitution created this check on the law-making power of the executive to reinforce the notion that law-making will remain the prerogative of the legislature. Earlier this year, in the aftermath of the Delhi gangrape, public pressure led the government to appoint a three-member committee under the late Justice J.S. Verma to suggest changes to laws relating to crimes against women. An amendment bill had already been pending in Parliament. In spite of this, the government brought in the Criminal Law Ordinance, giving effect to some of the committee's recommendations. Once Parliament reconvened, the government introduced a fresh bill replacing the ordinance, seeking to create more stringent provisions on matters related to sexual offences. It passed muster in both Houses. While the Criminal Law Ordinance is an illustration of an ordinance successfully passing through Parliament, there are examples of ordinances that have lapsed because they were not approved by Parliament. In 2004, a week after the winter session ended, the government issued an ordinance to give the Pension Fund Regulatory and Development Authority statutory powers as a regulator. Due to political opposition, the ordinance lapsed and, subsequently, the bill lapsed at the end of the 14th Lok Sabha. The government re-introduced it as a bill in 2011, which is currently pending in Parliament. Although the government has used its power to issue a food security ordinance, the law guaranteeing this right will have to stand scrutiny in Parliament. What remains to be seen is how Parliament debates the right to food in the upcoming monsoon session. That should give us some food for thought. For an analysis of the National Food Security Bill, refer to Sakshi's blog post here.
Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts. It had first recommended these names earlier this year and in August last year, but these appointments were not made. The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts). Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases. As of today, more than four crore cases are pending across all courts in India. In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.
High vacancy of judges across courts
Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges. Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually. However, vacancies persist due to insufficient appointments (see Figures 1 and 2). Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts).
|
Figure 1: Vacancy of judges in High Courts |
Figure 2: Vacancy of judges in subordinate courts |
|
|
|
|
Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS. |
|
As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34). Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098). Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges. In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3). The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled.
|
Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021)
|
|
Source: Vacancy Statement, Department of Justice; PRS. |
Appointments of High Court judges are guided by a memorandum of procedure. As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs. However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts. Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court. No timeline is prescribed for this stage of the appointment process. In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.
As of today, over 3.6 crore cases are pending before subordinate courts in India. As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts. Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4). Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.
For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.
Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)
|
|
|
Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS. |
How many judges do we need?
The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary. Lack of adequate number of judges means a greater workload per judge. Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts. Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1).
Table 1: Methods recommended for calculating the required number of judges for subordinate courts
|
Method of calculation |
Recommendation and its status |
|
Judge-to-population ratio: optimum number of judges per million population |
The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people. This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002). For 2020, the judge-to-population ratio was 21 judges per million population. Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts. |
|
Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge |
The Law Commission of India (2014) proposed this method. It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions. |
|
Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions |
The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method. It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts. In 2017, the Supreme Court accepted this model. |
|
Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study |
Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts. It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court. The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi. |
Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.
