The Consumer Protection Bill, 2018 was introduced in Lok Sabha in January 2018. The Bill replaces the Consumer Protection Act, 1986. Previously in 2015, a Bill had been introduced to replace the 1986 Act. The 2015 Bill acknowledged that the rapid change in consumer markets, introduction of practices such as misleading advertisements, and new modes of transactions (online, teleshopping, etc.) had necessitated the need for a new law. The Bill was subsequently referred to a Standing Committee, which recommended several changes to it. The Bill was withdrawn and replaced with the Consumer Protection Bill, 2018. The Bill is listed for passage in the ongoing Monsoon Session. In this post, we analyse the Bill in its current form.

How is the 2018 Bill different from the 1986 Act?

The Bill adds various provisions for consumer protection that were absent in the 1986 Act. Key among them are the provisions on product liability and unfair contracts. Under product liability, when a consumer suffers an injury, property damage or death due to a defect in a product or service, he can file a claim for compensation under product liability. The Bill outlines cases in which the product manufacturer, service provider and seller will be held guilty under product liability. Under the proposed law, to claim product liability, an aggrieved consumer has to prove any one of the conditions mentioned in the Bill with regard to a manufacturer, service provider and seller, as the case may be.

An unfair contract has been defined as a contract between a consumer and manufacturer/ service provider if it causes significant change in consumer rights. Unfair contracts cover six terms, such as payment of excessive security deposits in an arrangement, disproportionate penalty for a breach, and unilateral termination without cause. The consumer courts being set up under the Bill will determine contract terms to be unfair and declare them null and void.

What are the different bodies being set up under the Bill?

The Bill sets up Consumer Protection Councils as advisory bodies, who will advise on protection and promotion of consumer rights. However, it does not make it clear who these Councils will render advise to. Under the 1986 Act, the Consumer Protection Councils have the responsibility to protect and promote consumer rights.

To promote, protect, and enforce consumer rights, the Bill is setting up a regulatory body, known as the Central Consumer Protection Authority. This Authority can also pass orders to prevent unfair and restrictive trade practices, such as selling goods not complying with standards, and impose penalties for false and misleading advertisements.

The Bill also sets up the Consumer Disputes Redressal Commissions (known as consumer courts) at the district, state and national levels. These Commissions will adjudicate a broad range of complaints, including complaints on defective goods and deficient services of varying values. These Commissions are also present under the 1986 Act. However, their pecuniary jurisdiction (amount up to which they can hear complaints) has been revised under the Bill. The Bill also adds a provision for alternate dispute redressal mechanism. As part of this, mediation cells will be attached with the Consumer Disputes Redressal Commissions.

What are the penal provisions under the Bill?

The Bill increases penalties for different offences specified in it. It also adds penalties for offences such as issuing misleading advertisements, and manufacturing and selling adulterated or spurious goods. For example, in case of false and misleading advertisements, the Central Consumer Protection Authority can impose a penalty of up to Rs 10 lakh on a manufacturer or an endorser. For a subsequent offence, the fine may extend to Rs 50 lakh.  The manufacturer can also be punished with imprisonment of up to two years, which may extend to five years for every subsequent offence. The Authority can also prohibit the endorser of a misleading advertisement from endorsing any particular product or service for a period of up to one year.  For every subsequent offence, the period of prohibition may extend to three years.  There are certain exceptions when an endorser will not be held liable for such a penalty.

Are there any issues to think about in the Bill?

The 2018 Bill is a marked improvement over the 2015 Bill and addresses several issues in the 2015 Bill. However, two major issues with regard to the Consumer Disputes Redressal Commissions remain. We discuss them below.

First issue is with regard to the composition of these Commissions. The Bill specifies that the Commissions will be headed by a ‘President’ and will comprise other members.  However, the Bill delegates the power of deciding the qualifications of the President and members to the central government.  It also does not specify that the President or members should have minimum judicial qualifications.  This is in contrast with the existing Consumer Protection Act, 1986, which states that the Commissions at various levels will be headed by a person qualified to be a judge.  The 1986 Act also specifies the minimum qualification of members.

Under the current Bill, if the Commissions were to have only non-judicial members, it may violate the principle of separation of powers between the executive and the judiciary.  Since these Commissions are adjudicating bodies and will look at consumer dispute cases, it is unclear how a Commission that may comprise only non-judicial members will undertake this function.

Second issue is with regard to the method of appointment of members of the Commissions. The Bill permits the central government to notify the method of appointment of members of the Commissions.  It does not require that the selection involve members from the higher judiciary.  It may be argued that allowing the executive to determine the appointment of the members of Commissions could affect the independent functioning of the Commissions.  This provision is also at variance with the 1986 Act.  Under the Act, appointment of members to these Commissions is done through a selection committee.  These section committees comprise a judicial member.

As mentioned previously, the Commissions are intended to be quasi-judicial bodies, while the government is part of the executive.  There may be instances where the government is a party to a dispute relating to deficiency in service provided by a government enterprise, for e.g., the Railways.  In such a case, there would be a conflict of interest as the government would be a party to the dispute before the Commissions and will also have the power to appoint members to the Commission.

Several Rajya Sabha seats go to elections this year. The President and the Vice-President are also due to be elected by August. We analyse the impact of the recent State Assembly elections on the composition of the Rajya Sabha and the outcome of the Presidential polls. Rajya Sabha - How will its composition change? Since Rajya Sabha members are elected by the elected members of State Legislative Assemblies, a change in the composition of State Assemblies can affect the composition of Rajya Sabha.  A total of 61 Rajya Sabha seats are up for election in April and July.  This includes 10 seats from Uttar Pradesh and 1 seat from Uttarakhand. In light of the recent Assembly elections, we work out two scenarios to estimate the composition of Rajya Sabha in 2012. Members of Rajya Sabha are elected through the system of proportional representation by means of the Single Transferable Vote (STV). In an STV election, a candidate is required to achieve a certain minimum number of votes (called the 'quota') to be elected.  (For more details on the STV system, click here) For instance, in the case of Uttar Pradesh (UP) 10 Rajya Sabha seats go to election this year.  Candidates will be elected to these 10 seats by the 403 elected MLAs of the Uttar Pradesh State Assembly.  Each MLA will rank the candidates based on his/ her preference. After successive rounds of elimination, candidates who are able to secure at least 37  {or 403/(10+1) } votes will be declared elected. In the new UP Assembly, Samajwadi  Party (SP) has a total strength of 224 members. As a result, SP can elect at least 6 (or 224/37) Rajya Sabha MPs of its choice.  BSP's strength of 80 will allow it to elect 2 (or 80/37) MPs to Rajya Sabha. Similarily, the BJP with a strength of 47 MLAs can have one candidate of its choice elected to the Rajya Sabha.  This leaves 1 seat.  The fate of this seat depends on the alliances that may be formed since no other party in UP has 37 or more seats in the Assembly.  If the Congress (28 seats) and RLD (9 seats) join hands, they may be able to elect a candidate of their choice. We build two scenarios which give the likely range of seats for the major coalitions and parties. The actual result will likely fall between these scenarios, depending on alliances for each election. Of the two scenarios, Scenario II is better for the UPA. It is based on the assumption that the UPA is able to put together the necessary support/ alliances to get its candidates elected to seats with indeterminate status.  Scenario I is based on the assumption that the UPA is not able to put together the required support. As a result, the seats in question get allocated to candidates from other parties/ coalitions. (See Notes for the composition of the coalitions) Composition of Rajya Sabha

Party/ Coalition Current composition Scenario I Scenario II
Total seats

245

245

245

UPA

93

95

98

NDA

66

67

65

Left

19

14

14

BSP

18

15

15

SP

5

9

9

BJD

6

8

7

AIADMK

5

5

5

Nominated

7

12

12

Others

21

20

20

Vacant

5

0

0

It appears that there would not be a major change in the composition of the Rajya Sabha. Which party's candidate is likely to become the next President? The next Presidential election will be held in June or July.  The electoral college for the Presidential election consists of the elected members of Lok Sabha, Rajya Sabha and all Legislative Assemblies. Each MP/ MLA’s vote has a pre-determined value based on the population they represent. For instance, an MP's vote has a value of 708, an MLA from UP has a vote value of 208 and an MLA from Sikkim has a vote value of 7. (Note that all MPs, irrespective of the constituency or State they represent, have equal vote value) As is evident, changes in the composition of Assemblies in larger States such as UP can have a major impact on the outcome of the Presidential election. The elections to the office of the President are held through the system of proportional representation by means of STV (same as in the case of Rajya Sabha).  The winning candidate must secure at least 50% of the total value of votes polled.  (For details, refer to this Election Commission document). By this calculation, a candidate will need at least 5,48,507 votes to be elected as the President. If the UPA were to vote as a consolidated block, its vote tally would reach 4,50,555 votes under Scenario II (the one that is favourable for the UPA).  Therefore, the UPA will have to seek alliances if it wants a candidate of its choice to be elected to the office of the President. Scenarios for Presidential elections (figures represent the value of votes available with each party/ coalition)

Party/ Coalition Scenario I Scenario II
UPA

4,48,431

4,50,555

NDA

3,05,328

3,03,912

Left

51,574

51,574

BSP

43,723

43,723

SP

69,651

69,651

BJD

30,923

30,215

AIADMK

36,216

36,216

Others

1,11,166

1,11,166

Total

10,97,012

10,97,012

Minimum required to be elected

5,48,507

5,48,507

What about the Vice-President? Elections to the office of the Vice-President (VP) will be held in July or August.  The electoral college will consist of all members of Lok Sabha and Rajya Sabha (i.e. both elected and nominated). Unlike the Presidential elections, all votes will have an equal value of one. Like the President, the VP is also elected through the system of proportional representation by means of STV.  The winning candidate must secure at least 50% of the total value of votes polled. Presently, two seats are vacant in the Lok Sabha. If we exclude these from our analysis, we find that a candidate will need at least 395 votes to be elected as the VP.  Under our best case scenario, the UPA holds 363 votes in the forthcoming VP elections. As is the case with Presidential elections, the UPA will have to seek alliances to get a candidate of its choice elected to the office of the Vice-President. Scenarios for VP elections (figures represent the value of votes available with each party/ coalition)

Party/ Coalition

Scenario I

Scenario II

UPA

360

363

NDA

216

214

Left

38

38

BSP

36

36

SP

31

31

BJD

22

21

AIADMK

14

14

Nominated

14

14

Others

57

57

Total

788

788

Minimum required to be elected

395

395

Notes: [1] UPA: Congress, Trinamool, DMK, NCP,Rashtriya Lok Dal, J&K National Conference, Muslim League Kerala State Committee, Kerala Congress (M), All India Majlis-e-Ittehadul Muslimeen, Sikkim Democratic Front, Praja Rajyam Party, Viduthalai Chiruthaigal Katchi [2] NDA: BJP, JD(U), Shiv Sena, Shiromani Akali Dal [3] Left: CPI(M), CPI, Revolutionary Socialist Party,All India Forward Bloc