Recently, the Cabinet Committee on Economic Affairs approved an increase in the Minimum Support Prices (MSPs) for Kharif crops for the 2018-19 marketing season. Subsequently, the Commission for Agricultural Costs and Prices (CACP) released its price policy report for Kharif crops for the marketing season 2018-19.
The central government notifies MSPs based on the recommendations of the CACP. These recommendations are made separately for the Kharif marketing season (KMS) and the Rabi marketing season (RMS). Post harvesting, the government procures crops from farmers at the MSP notified for that season, in order to ensure remunerative prices to farmers for their produce.
In this blog post, we look at how MSPs are determined, changes brought in them over time, and their effectiveness for farmers across different states.
How are Minimum Support Prices determined?
The CACP considers various factors such as the cost of cultivation and production, productivity of crops, and market prices for the determination of MSPs. The National Commission on Farmers(Chair: Prof. M. S. Swaminathan) in 2006 had recommended that MSPs must be at least 50% more than the cost of production. In this year’s budget speech, the Finance Minister said that MSPs would be fixed at least at 50% more than the cost of production.
The CACP calculates cost of production at three levels: (i) A2, which includes cost of inputs such as seeds, fertilizer, labour; (ii) A2+FL, which includes the implied cost of family labour (FL); and (iii) C2, which includes the implied rent on land and interest on capital assets over and above A2+FL.
Table 1 shows the cost of production as calculated by the CACP and the approved MSPs for KMS 2018-19. For paddy (common), the MSP was increased from Rs 1,550/quintal in 2017-18 to Rs 1,750/quintal in 2018-19. This price would give a farmer a profit of 50.1% on the cost of production A2+FL. However, the profit calculated on the cost of production C2 would be 12.2%. It has been argued that the cost of production should be taken as C2 for calculating MSPs. In such a scenario, this would have increased the MSP to Rs 2,340/quintal, much above the current MSP of Rs 1,750/quintal.
Which are the major crops that are procured at MSPs?
Every year, MSPs are announced for 23 crops. However, public procurement is limited to a few crops such as paddy, wheat and, to a limited extent, pulses as shown in Figure 1.
The procurement is also limited to a few states. Three states which produce 49% of the national wheat output account for 93% of procurement. For paddy, six states with 40% production share have 77% share of the procurement. As a result, in these states, farmers focus on cultivating these crops over other crops such as pulses, oilseeds, and coarse grains.
Due to limitations on the procurement side (both crop-wise and state-wise), all farmers do not receive benefits of increase in MSPs. The CACP has noted in its 2018-19 price policy report that the inability of farmers to sell at MSPs is one of the key areas of concern. Farmers who are unable to sell their produce at MSPs have to sell it at market prices, which may be much lower than the MSPs.
How have MSPs for major crops changed over time?
Higher procurement of paddy and wheat, as compared to other crops at MSPs tilts the production cycle towards these crops. In order to balance this and encourage the production of pulses, there is a larger proportional increase in the MSPs of pulses over the years as seen in Figure 2. In addition to this, it is also used as a measure to encourage farmers to shift from water-intensive crops such as paddy and wheat to pulses, which relatively require less water for irrigation.
What is the effectiveness of MSPs across states?
The MSP fixed for each crop is uniform for the entire country. However, the production cost of crops vary across states. Figure 3 highlights the MSP of paddy and the variation in its cost of production across states in 2018-19.
For example, production cost for paddy at the A2+FL level is Rs 702/quintal in Punjab and Rs 2,102/quintal in Maharashtra. Due to this differentiation, while the MSP of Rs 1,750/quintal of paddy will result in a profit of 149% to a farmer in Punjab, it will result in a loss of 17% to a farmer in Maharashtra. Similarly, at the C2 level, the production cost for paddy is Rs 1,174/quintal in Punjab and Rs 2,481/quintal in Maharashtra. In this scenario, a farmer in Punjab may get 49% return, while his counterpart in Maharashtra may make a loss of 29%.
Figure 4 highlights the MSP of wheat and the variation in its cost of production across states in 2017-18. In the case of wheat, the cost of production in Maharashtra and West Bengal is much more than the cost in rest of the states. At the A2+FL level, the cost of production in West Bengal is Rs 1,777/quintal. This is significantly higher than in states like Haryana and Punjab, where the cost is Rs 736/quintal and Rs 642/quintal, respectively. In this case, while a wheat growing farmer suffers a loss of 2% in West Bengal, a farmer in Haryana makes a profit of 136%. The return in Punjab is even higher at 1.5 times or more the cost of production.
Discussion on the first no-confidence motion of the 17th Lok Sabha began today. No-confidence motions and confidence motions are trust votes, used to test or demonstrate the support of Lok Sabha for the government in power. Article 75(3) of the Constitution states that the government is collectively responsible to Lok Sabha. This means that the government must always enjoy the support of a majority of the members of Lok Sabha. Trust votes are used to examine this support. The government resigns if a majority of members support a no-confidence motion, or reject a confidence motion.
So far, 28 no-confidence motions (including the one being discussed today) and 11 confidence motions have been discussed. Over the years, the number of such motions has reduced. The mid-1960s and mid-1970s saw more no-confidence motions, whereas the 1990s saw more confidence motions.
Figure 1: Trust votes in Parliament
Note: *Term shorter than 5 years; **6-year term.
Source: Statistical Handbook 2021, Ministry of Parliamentary Affairs; PRS.
The no-confidence motion being discussed today was moved on July 26, 2023. A motion of no-confidence is moved with the support of at least 50 members. The Speaker has the discretion to allot time for discussion of the motion. The Rules of Procedure state that the motion must be discussed within 10 days of being introduced. This year, the no-confidence motion was discussed 13 calendar days after introduction. Since the introduction of the no-confidence motion on July 26, 12 Bills have been introduced and 18 Bills have been passed by Lok Sabha. In the past, on four occasions, the discussion on no-confidence motions began seven days after their introduction. On these occasions, Bills and other important issues were debated before the discussion on the no-confidence motion began.
Figure 2: Members rise in support of the motion of no-confidence in Lok Sabha
Source: Sansad TV, Lok Sabha, July 26, 2023; PRS.
Figure 3: Number of days from introduction to discussion on no-confidence motions
Note: Number of days implies calendar days.
Source: Statistical Handbook 2021, Ministry of Parliamentary Affairs; PRS.
On average, no-confidence motions (excluding the one being discussed today) have been discussed for 13 hours over three days. Discussions have lasted longer than 20 hours on four instances, most recently in 2003. Today’s no-confidence motion was allotted 12 hours discussion time by the Business Advisory Committee.
Following the discussion, the motion is put to vote. 26 out of 27 no-confidence motions (excluding the one being discussed today) have been voted upon and rejected. This means that no government has ever had to resign following a vote of no-confidence. On one occasion, in 1979, the discussion on a no-confidence motion against the Morarji Desai government remained inconclusive. He resigned before the motion was put to vote. 50% of all no-confidence motions (14 out of 28) were discussed between 1965 and 1975. Of these, 12 were against governments headed by Indira Gandhi.
Figure 4: Duration of discussion on no-confidence motions
Note: This graph excludes the no confidence motion moved on July 26, 2023.
Source: Statistical Handbook 2021, Ministry of Parliamentary Affairs; PRS.
In comparison, confidence motions have a more varied history. The first motion, brought in 1979 to demonstrate confidence in Charan Singh’s government, was not discussed at all. The Prime Minister resigned before the discussion could take place. Since then, 11 confidence motions have been discussed in Lok Sabha, with nine occurring in the 1990s. During this period, several coalition governments were formed, and Prime Ministers sought to prove their majority through confidence motions. These motions have been discussed, on average, for 12 hours over two days.
Figure 5: Duration of discussion of confidence motions
Source: Statistical Handbook 2021, Ministry of Parliamentary Affairs; PRS.
Of the 11 confidence motions discussed in Lok Sabha, seven were accepted. On three instances, governments had to resign as they could not prove that they had the support of the majority. On one instance in 1996, the motion was not put to vote. Following an eleven-hour discussion on this confidence motion, Prime Minister Atal Bihari Vajpayee announced his intention to resign on the floor of the House. He resigned 16 days into his term.
Vajpayee became Prime Minister again in 1999, and faced another confidence motion. This time, it was put to vote. The motion was defeated by a margin of one vote. This has been the closest result on a trust vote in the history of Lok Sabha. The next closest result was when a motion of no-confidence against P V Narasimha Rao’s government was defeated by 14 votes in 1993. In most cases, results have been in favour of the government by a large margin.
