Recently, the Cabinet Committee on Economic Affairs approved an increase in the Minimum Support Prices (MSPs) for Kharif crops for the 2018-19 marketing season.  Subsequently, the Commission for Agricultural Costs and Prices (CACP) released its price policy report for Kharif crops for the marketing season 2018-19.

The central government notifies MSPs based on the recommendations of the CACP.  These recommendations are made separately for the Kharif marketing season (KMS) and the Rabi marketing season (RMS).  Post harvesting, the government procures crops from farmers at the MSP notified for that season, in order to ensure remunerative prices to farmers for their produce.

In this blog post, we look at how MSPs are determined, changes brought in them over time, and their effectiveness for farmers across different states.

How are Minimum Support Prices determined?

The CACP considers various factors such as the cost of cultivation and production, productivity of crops, and market prices for the determination of MSPs.  The National Commission on Farmers(Chair: Prof. M. S. Swaminathan) in 2006 had recommended that MSPs must be at least 50% more than the cost of production.  In this year’s budget speech, the Finance Minister said that MSPs would be fixed at least at 50% more than the cost of production.

The CACP calculates cost of production at three levels: (i) A2, which includes cost of inputs such as seeds, fertilizer, labour; (ii) A2+FL, which includes the implied cost of family labour (FL); and (iii) C2, which includes the implied rent on land and interest on capital assets over and above A2+FL.

Table 1 shows the cost of production as calculated by the CACP and the approved MSPs for KMS 2018-19.  For paddy (common), the MSP was increased from Rs 1,550/quintal in 2017-18 to Rs 1,750/quintal in 2018-19.  This price would give a farmer a profit of 50.1% on the cost of production A2+FL.  However, the profit calculated on the cost of production C2 would be 12.2%.  It has been argued that the cost of production should be taken as C2 for calculating MSPs.  In such a scenario, this would have increased the MSP to Rs 2,340/quintal, much above the current MSP of Rs 1,750/quintal.

Figure 1

Which are the major crops that are procured at MSPs?

Every year, MSPs are announced for 23 crops.  However, public procurement is limited to a few crops such as paddy, wheat and, to a limited extent, pulses as shown in Figure 1.

Figure 2

The procurement is also limited to a few states.  Three states which produce 49% of the national wheat output account for 93% of procurement.  For paddy, six states with 40% production share have 77% share of the procurement.  As a result, in these states, farmers focus on cultivating these crops over other crops such as pulses, oilseeds, and coarse grains.

Due to limitations on the procurement side (both crop-wise and state-wise), all farmers do not receive benefits of increase in MSPs.  The CACP has noted in its 2018-19 price policy report that the inability of farmers to sell at MSPs is one of the key areas of concern.  Farmers who are unable to sell their produce at MSPs have to sell it at market prices, which may be much lower than the MSPs.

How have MSPs for major crops changed over time?

Higher procurement of paddy and wheat, as compared to other crops at MSPs tilts the production cycle towards these crops.  In order to balance this and encourage the production of pulses, there is a larger proportional increase in the MSPs of pulses over the years as seen in Figure 2.  In addition to this, it is also used as a measure to encourage farmers to shift from water-intensive crops such as paddy and wheat to pulses, which relatively require less water for irrigation.

Figure 3

What is the effectiveness of MSPs across states?

The MSP fixed for each crop is uniform for the entire country.  However, the production cost of crops vary across states.  Figure 3 highlights the MSP of paddy and the variation in its cost of production across states in 2018-19.

Figure 4

For example, production cost for paddy at the A2+FL level is Rs 702/quintal in Punjab and Rs 2,102/quintal in Maharashtra.  Due to this differentiation, while the MSP of Rs 1,750/quintal of paddy will result in a profit of 149% to a farmer in Punjab, it will result in a loss of 17% to a farmer in Maharashtra.  Similarly, at the C2 level, the production cost for paddy is Rs 1,174/quintal in Punjab and Rs 2,481/quintal in Maharashtra.  In this scenario, a farmer in Punjab may get 49% return, while his counterpart in Maharashtra may make a loss of 29%.

Figure 5

Figure 4 highlights the MSP of wheat and the variation in its cost of production across states in 2017-18. In the case of wheat, the cost of production in Maharashtra and West Bengal is much more than the cost in rest of the states.  At the A2+FL level, the cost of production in West Bengal is Rs 1,777/quintal.  This is significantly higher than in states like Haryana and Punjab, where the cost is Rs 736/quintal and Rs 642/quintal, respectively.  In this case, while a wheat growing farmer suffers a loss of 2% in West Bengal, a farmer in Haryana makes a profit of 136%.  The return in Punjab is even higher at 1.5 times or more the cost of production.

The Saansad Adarsh Gram Yojana was launched last week, for the development of model villages.  Under the Yojana, Members of Parliament (MPs) will be responsible for developing the socio-economic and physical infrastructure of three villages each by 2019, and a total of eight villages each by 2024.

The first Adarsh Gram must be developed by 2016, and two more by 2019.  From 2019 to 2024, five more Adarsh Grams must be developed by each MP, one each year.  This implies that a total of 6,433 Adarsh Grams, of the 2,65,000 gram panchayats, will be created by 2024. Key features of the Yojana are outlined below.

Objectives

Key objectives of the Yojana include:

  1. The development of model villages, called Adarsh Grams, through the implementation of existing schemes, and certain new initiatives to be designed for the local context, which may vary from village to village.
  2. Creating models of local development which can be replicated in other villages.

Identification of villages

MPs can select any gram panchayat, other than their own village or that of their spouse, to be developed as an Adarsh Gram.  The village must have a population of 3000-5000 people if it is located in the plains, or 1000-3000 people if located in hilly areas.

Lok Sabha MPs can choose a village from their constituency, and Rajya Sabha MPs from the state from which they are elected.  Nominated members can choose a village from any district of the country.  MPs which represent urban constituencies can identify a village from a neighbouring rural constituency.

Funding

No new funds have been allocated for the Yojana.  Resources may be raised through:

  1. Funds from existing schemes, such as the Indira Awas Yojana, Pradhan Mantri Gram Sadak Yojana, Mahatma Gandhi National Rural Employment Guarantee Scheme, and Backward Regions Grant Fund, etc.,
  2. The Member of Parliament Local Area Development Scheme (MPLADS),
  3. The gram panchayat’s own revenue,
  4. Central and State Finance Commission Grants, and
  5. Corporate Social Responsibility funds.

Implementation

A Village Development Plan must be created for each Adarsh Gram.  While each village will develop a list of activities to be carried out, based on its own resources and requirements, possible activities have been listed in the guidelines for the scheme.  For example, Adarsh Grams can work towards providing universal access to basic healthcare facilities, promoting diversified livelihoods through agriculture related livelihoods and skill development, providing pension for all eligible families, housing for all, and promoting social forestry.

The table below outlines key functionaries at the national, state, district, and village level and their responsibilities.

Table 1: Roles and responsibilities of key functionaries

Level Functionary Key roles and responsibilities
National Member of Parliament
  • Identify the Adarsh Gram
  • Facilitate the planning process
  • Mobilise additional funds
  • Monitor the scheme
  Two committees, headed by the Minister of Rural Development, and Secretary, Rural Development, respectively.*
  • Monitor the process of identification and planning
  • Review the implementation of the scheme
  • Identify bottlenecks in the scheme
  • Issue operational guidelines
  • Indicate specific resource support which each Ministry can provide
State A committee headed by the Chief Secretary
  • Supplement central guidelines for the scheme
  • Review Village Development Plans
  • Review implementation
  • Outline monitoring mechanisms
  • Design a grievance redressal mechanism for the scheme
District District Collector
  • Conduct the baseline survey
  • Facilitate the preparation of the Village Development Plan
  • Converge relevant schemes
  • Ensure grievance redressal
  • Monthly progress review of the scheme
Village Gram Panchayat and functionaries of schemes (at various levels)
  • Implement of the scheme
  • Identify common needs of the village
  • Leverage resources from various programmes
  • Ensure participation in the scheme

Note: *These committees will include members from other Ministries.

Sources: Saansad Adarsh Gram Yojana Guidelines, Ministry of Rural Development; PRS

Monitoring

A web based monitoring system will be established to enable the MP and other stakeholders to monitor the scheme.  Outputs relating to physical and financial targets will be measured each quarter.  A mid-term evaluation and post-project evaluation will be conducted through an independent agency.

More information on the scheme is available in the guidelines for the scheme, here.