Recently, the Cabinet Committee on Economic Affairs approved an increase in the Minimum Support Prices (MSPs) for Kharif crops for the 2018-19 marketing season. Subsequently, the Commission for Agricultural Costs and Prices (CACP) released its price policy report for Kharif crops for the marketing season 2018-19.
The central government notifies MSPs based on the recommendations of the CACP. These recommendations are made separately for the Kharif marketing season (KMS) and the Rabi marketing season (RMS). Post harvesting, the government procures crops from farmers at the MSP notified for that season, in order to ensure remunerative prices to farmers for their produce.
In this blog post, we look at how MSPs are determined, changes brought in them over time, and their effectiveness for farmers across different states.
How are Minimum Support Prices determined?
The CACP considers various factors such as the cost of cultivation and production, productivity of crops, and market prices for the determination of MSPs. The National Commission on Farmers(Chair: Prof. M. S. Swaminathan) in 2006 had recommended that MSPs must be at least 50% more than the cost of production. In this year’s budget speech, the Finance Minister said that MSPs would be fixed at least at 50% more than the cost of production.
The CACP calculates cost of production at three levels: (i) A2, which includes cost of inputs such as seeds, fertilizer, labour; (ii) A2+FL, which includes the implied cost of family labour (FL); and (iii) C2, which includes the implied rent on land and interest on capital assets over and above A2+FL.
Table 1 shows the cost of production as calculated by the CACP and the approved MSPs for KMS 2018-19. For paddy (common), the MSP was increased from Rs 1,550/quintal in 2017-18 to Rs 1,750/quintal in 2018-19. This price would give a farmer a profit of 50.1% on the cost of production A2+FL. However, the profit calculated on the cost of production C2 would be 12.2%. It has been argued that the cost of production should be taken as C2 for calculating MSPs. In such a scenario, this would have increased the MSP to Rs 2,340/quintal, much above the current MSP of Rs 1,750/quintal.
Which are the major crops that are procured at MSPs?
Every year, MSPs are announced for 23 crops. However, public procurement is limited to a few crops such as paddy, wheat and, to a limited extent, pulses as shown in Figure 1.
The procurement is also limited to a few states. Three states which produce 49% of the national wheat output account for 93% of procurement. For paddy, six states with 40% production share have 77% share of the procurement. As a result, in these states, farmers focus on cultivating these crops over other crops such as pulses, oilseeds, and coarse grains.
Due to limitations on the procurement side (both crop-wise and state-wise), all farmers do not receive benefits of increase in MSPs. The CACP has noted in its 2018-19 price policy report that the inability of farmers to sell at MSPs is one of the key areas of concern. Farmers who are unable to sell their produce at MSPs have to sell it at market prices, which may be much lower than the MSPs.
How have MSPs for major crops changed over time?
Higher procurement of paddy and wheat, as compared to other crops at MSPs tilts the production cycle towards these crops. In order to balance this and encourage the production of pulses, there is a larger proportional increase in the MSPs of pulses over the years as seen in Figure 2. In addition to this, it is also used as a measure to encourage farmers to shift from water-intensive crops such as paddy and wheat to pulses, which relatively require less water for irrigation.
What is the effectiveness of MSPs across states?
The MSP fixed for each crop is uniform for the entire country. However, the production cost of crops vary across states. Figure 3 highlights the MSP of paddy and the variation in its cost of production across states in 2018-19.
For example, production cost for paddy at the A2+FL level is Rs 702/quintal in Punjab and Rs 2,102/quintal in Maharashtra. Due to this differentiation, while the MSP of Rs 1,750/quintal of paddy will result in a profit of 149% to a farmer in Punjab, it will result in a loss of 17% to a farmer in Maharashtra. Similarly, at the C2 level, the production cost for paddy is Rs 1,174/quintal in Punjab and Rs 2,481/quintal in Maharashtra. In this scenario, a farmer in Punjab may get 49% return, while his counterpart in Maharashtra may make a loss of 29%.
Figure 4 highlights the MSP of wheat and the variation in its cost of production across states in 2017-18. In the case of wheat, the cost of production in Maharashtra and West Bengal is much more than the cost in rest of the states. At the A2+FL level, the cost of production in West Bengal is Rs 1,777/quintal. This is significantly higher than in states like Haryana and Punjab, where the cost is Rs 736/quintal and Rs 642/quintal, respectively. In this case, while a wheat growing farmer suffers a loss of 2% in West Bengal, a farmer in Haryana makes a profit of 136%. The return in Punjab is even higher at 1.5 times or more the cost of production.
By Rohit and Jhalak Some Rajya Sabha seats will be contested over the next year. The Presidential elections are also scheduled to be held in 2012. The recent assembly elections has implications for both these elections. The Presidential elections will depend on the strenght in the assemblies, in Lok Sabha and in Rajya Sabha (which could change over the next year). Implications for Rajya Sabha Elections The composition of Rajya Sabha may undergo some changes. A total of 12 Rajya Sabha seats are up for election in 2011. This includes 6 seats from West Bengal, 3 from Gujarat and 1 each from Maharashtra, Tamil Nadu and Goa. Another 65 seats, across 18 states, go for elections in early 2012. The largest chunk of these seats comes from UP(10), followed by Andhra Pradesh(6), Bihar(6) and Maharashtra(6). Since Rajya Sabha members are elected by the elected members of the Legislative Assembly of the State, a change in the composition of the assembly can affect the election outcome. We used the current assembly compositions to work out scenarios for Rajya Sabha in 2011 and 2012. There could be alliances between parties for the Rajya Sabha elections, so we have estimated a range for each grouping (Scenario I and II) for 2012. See Notes [1] and [2].
| Parties/ Coalitions | 2010 | Scenario 2011 | Scenario 2012 | |
| I | II | |||
| UPA | 89 | 94 | 95 | 97 |
| NDA | 65 | 65 | 67 | 66 |
| Left | 22 | 19 | 14 | 14 |
| BSP | 18 | 18 | 19 | 19 |
| SP | 5 | 5 | 6 | 6 |
| AIADMK | 4 | 5 | 5 | 5 |
| BJD | 6 | 6 | 5 | 5 |
| Other parties | 18 | 18 | 20 | 19 |
| Independent | 6 | 6 | 5 | 5 |
| Nominated | 8 | 9 | 9 | 9 |
| Total | 241 | 245 | 245 | 245 |
Implications for the election of the President The President is elected in accordance with the provisions of Article 54 and 55 of the Constitution. The electorate consists of the elected members of Lok Sabha, Rajya Sabha and all Legislative Assemblies. Each MP/ MLA's vote has a pre-determined value based on the population they represent. The election is held in accordance with the system of proportional representation by means of a single transferable vote. The winning candidate must secure at least 50% of the total value of votes polled. (For details, refer to this Election Commission document). There is no change in the Lok Sabha composition (unless there are bye-elections). Position in Legislative Assemblies After the recent round of assembly elections, the all-India MLA count adds up to:
| UPA | 1613 |
| NDA | 1106 |
| Left | 205 |
| BSP | 246 |
| AIADMK | 155 |
| BJD | 103 |
| SP | 95 |
| Others | 597 |
The above numbers can now be used to estimate the value of votes polled by each coalition. See Note [3]:
| Value of votes cast | Scenario - 1 | Scenario - 2 |
| UPA | 439,437 | 440,853 |
| NDA | 307,737 | 307,029 |
| Left | 51,646 | 51,646 |
| BSP | 77,243 | 77,243 |
| SP | 38,531 | 38,531 |
| AIADMK | 36,392 | 36,392 |
| BJD | 28,799 | 28,799 |
| Others | 119,097 | 118,389 |
| Total | 1,098,882 | 1,098,882 |
| Min. to be elected | 549,442 | 549,442 |
The UPA has the highest value of votes polled but the figure is not sufficient to get its candidate elected. Assuming that there are at most three candidates with significant support (UPA, NDA, and Left/Third Front), the winner will be the one who manages to bridge the gap with second preference votes. On this factor, the UPA backed candidate is likely to hold the edge over others. Notes: [1] At present, there are four vacant seats in Rajya Sabha (1 Maharashtra, 1 TN, 1 WB and 1 Nominated). It is assumed that all these seats are filled up in 2011. [2] Three of the 11 nominated members in the current Rajya Sabha have declared their party affiliation as INC. These have been included in the UPA count in the above analysis. For the sake of simplicity, it is assumed that members who get nominated in 2011/ 12 are not aligned to any party/ coalition. [3] The above analysis is based on the assumption that the next set of assembly elections happen after the Presidential election.
