Recently, the Cabinet Committee on Economic Affairs approved an increase in the Minimum Support Prices (MSPs) for Kharif crops for the 2018-19 marketing season. Subsequently, the Commission for Agricultural Costs and Prices (CACP) released its price policy report for Kharif crops for the marketing season 2018-19.
The central government notifies MSPs based on the recommendations of the CACP. These recommendations are made separately for the Kharif marketing season (KMS) and the Rabi marketing season (RMS). Post harvesting, the government procures crops from farmers at the MSP notified for that season, in order to ensure remunerative prices to farmers for their produce.
In this blog post, we look at how MSPs are determined, changes brought in them over time, and their effectiveness for farmers across different states.
How are Minimum Support Prices determined?
The CACP considers various factors such as the cost of cultivation and production, productivity of crops, and market prices for the determination of MSPs. The National Commission on Farmers(Chair: Prof. M. S. Swaminathan) in 2006 had recommended that MSPs must be at least 50% more than the cost of production. In this year’s budget speech, the Finance Minister said that MSPs would be fixed at least at 50% more than the cost of production.
The CACP calculates cost of production at three levels: (i) A2, which includes cost of inputs such as seeds, fertilizer, labour; (ii) A2+FL, which includes the implied cost of family labour (FL); and (iii) C2, which includes the implied rent on land and interest on capital assets over and above A2+FL.
Table 1 shows the cost of production as calculated by the CACP and the approved MSPs for KMS 2018-19. For paddy (common), the MSP was increased from Rs 1,550/quintal in 2017-18 to Rs 1,750/quintal in 2018-19. This price would give a farmer a profit of 50.1% on the cost of production A2+FL. However, the profit calculated on the cost of production C2 would be 12.2%. It has been argued that the cost of production should be taken as C2 for calculating MSPs. In such a scenario, this would have increased the MSP to Rs 2,340/quintal, much above the current MSP of Rs 1,750/quintal.
Which are the major crops that are procured at MSPs?
Every year, MSPs are announced for 23 crops. However, public procurement is limited to a few crops such as paddy, wheat and, to a limited extent, pulses as shown in Figure 1.
The procurement is also limited to a few states. Three states which produce 49% of the national wheat output account for 93% of procurement. For paddy, six states with 40% production share have 77% share of the procurement. As a result, in these states, farmers focus on cultivating these crops over other crops such as pulses, oilseeds, and coarse grains.
Due to limitations on the procurement side (both crop-wise and state-wise), all farmers do not receive benefits of increase in MSPs. The CACP has noted in its 2018-19 price policy report that the inability of farmers to sell at MSPs is one of the key areas of concern. Farmers who are unable to sell their produce at MSPs have to sell it at market prices, which may be much lower than the MSPs.
How have MSPs for major crops changed over time?
Higher procurement of paddy and wheat, as compared to other crops at MSPs tilts the production cycle towards these crops. In order to balance this and encourage the production of pulses, there is a larger proportional increase in the MSPs of pulses over the years as seen in Figure 2. In addition to this, it is also used as a measure to encourage farmers to shift from water-intensive crops such as paddy and wheat to pulses, which relatively require less water for irrigation.
What is the effectiveness of MSPs across states?
The MSP fixed for each crop is uniform for the entire country. However, the production cost of crops vary across states. Figure 3 highlights the MSP of paddy and the variation in its cost of production across states in 2018-19.
For example, production cost for paddy at the A2+FL level is Rs 702/quintal in Punjab and Rs 2,102/quintal in Maharashtra. Due to this differentiation, while the MSP of Rs 1,750/quintal of paddy will result in a profit of 149% to a farmer in Punjab, it will result in a loss of 17% to a farmer in Maharashtra. Similarly, at the C2 level, the production cost for paddy is Rs 1,174/quintal in Punjab and Rs 2,481/quintal in Maharashtra. In this scenario, a farmer in Punjab may get 49% return, while his counterpart in Maharashtra may make a loss of 29%.
Figure 4 highlights the MSP of wheat and the variation in its cost of production across states in 2017-18. In the case of wheat, the cost of production in Maharashtra and West Bengal is much more than the cost in rest of the states. At the A2+FL level, the cost of production in West Bengal is Rs 1,777/quintal. This is significantly higher than in states like Haryana and Punjab, where the cost is Rs 736/quintal and Rs 642/quintal, respectively. In this case, while a wheat growing farmer suffers a loss of 2% in West Bengal, a farmer in Haryana makes a profit of 136%. The return in Punjab is even higher at 1.5 times or more the cost of production.
On October 18, it was reported in the news that the central government has been given more time for framing rules under the Citizenship (Amendment) Act, 2019. The President had given assent to this Act in December 2019 and the Act came into force in January 2020. Similarly, about two years have passed since the new labour codes were passed by Parliament, and the final Rules are yet to be published. This raises the question how long the government can take to frame Rules and what is the procedure guiding this. In this blog, we discuss the same.
Under the Constitution, the Legislature has the power to make laws and the Executive is responsible for implementing them. Often, the Legislature enacts a law covering the general principles and policies, and delegates the power to the Executive for specifying certain details for the implementation of a law. For example, the Citizenship Amendment Act provides who will be eligible for citizenship. The certificate of registration or naturalization to a person will be issued, subject to conditions, restrictions, and manner as may be prescribed by the central government through Rules. Delay in framing Rules results in delay in implementing the law, since the necessary details are not available. For example, new labour codes provide a social security scheme for gig economy workers such as Swiggy and Zomato delivery persons and Uber and Ola drivers. These benefits as per these Codes are yet to be rolled out as the Rules are yet to be notified.
Timelines and checks and balances for adherence
Each House of Parliament has a Committee of Members to examine Rules, Regulations, and government orders in detail called the Committee on Subordinate Legislation. Over the years, the recommendations of these Committees have shaped the evolution of the procedure and timelines for framing subordinate legislation. These are reflected in the Manual of Parliamentary Procedures issued by the Ministry of Parliamentary Affairs, which provides detailed guidelines.
Ordinarily, Rules, Regulations, and bye-laws are to be framed within six months from the date on which the concerned Act came into force. Post that, the concerned Ministry is required to seek an extension from the Parliamentary Committees on Subordinate Legislation. The reason for the extension needs to be stated. Such extensions may be granted for a maximum period of three months at a time. For example, in case of Rules under the Citizenship Amendment Act, 2019, at an earlier instance, an extension was granted on account of the onset of the COVID-19 pandemic.
|
Activity |
Timeline |
|
|
|
|
|
|
To ensure monitoring, every Ministry is required to prepare a quarterly report on the status of subordinate legislation not framed and share it with the Ministry of Law and Justice. These reports are not available in the public domain.
Recommendations to address delays
Over the years, the Subordinate Legislation Committees in both Houses have observed multiple instances of non-adherence to the above timelines by various Ministries. To address this, they have made the following key recommendations:
Are all Rules under an Act required to be framed?
Usually, the expressions used in an Act are “The Central Government may, by notification, make rules for carrying out the provisions of this Act.”, or “as may be prescribed”. Hence, it may appear that the laws aim to enable rule-making instead of mandate rule-making. However, certain provisions of an Act cannot be brought into force if the required details have not been prescribed under the Rules. This makes the implementation of the Act consequent to the publication of respective Rules. For example, the Criminal Procedure (Identification) Act, 2022 enables the police and certain other persons to collect identity-related information about certain persons. It provides that the manner of collection of such information may be specified by the central government. Unless the manner is prescribed, such collection cannot take place.
That said, some other rule-making powers may be enabling in nature and subject to discretion by the concerned Ministry. In 2016, Rajya Sabha Committee on Subordinate Legislation examined the status of Rules and Regulations to be framed under the Energy Conservation Act, 2001. It observed that the Ministry of Power had held that two Rules and three Regulations under this Act were not necessary. The Ministry of Law and Justice had opined that those deemed not necessary were enabling provisions meant for unforeseen circumstances. The Rajya Sabha Committee (2016) had recommended that where the Ministry does not feel the need for framing subordinate legislation, the Minister should table a statement in Parliament, stating reasons for such a conclusion.
Some key issues related to subordinate legislation
The Legislature delegates the power to specify details for the implementation of a law to the Executive through powers for framing subordinate legislation. Hence, it is important to ensure these are well-scrutinised so that they are within the limits envisaged in the law.
See here for our recently published analysis of the Criminal Procedure (Identification) Rules, 2022, notified in September 2022. Also, check out PRS analysis of:
