According to a press release, the Ministry of Civil Aviation is considering abolishing the development fee being levied at the Delhi and Mumbai airports. The Ministry has already asked the Kolkata and Chennai airports not to levy a development fee. According to the Ministry, this is being done to make air travel more affordable. Currently, development fee charged at the Delhi Airport ranges from Rs 200 to Rs 1300. At the Mumbai airport, the fee ranges from Rs 100 to Rs 600. It is pertinent to note that though, the Ministry has proposed abolishing the development fee, the airport operators may still levy a user development fee. In this blog we discuss some of the aspects of development fee and user development fee. What is a development fee and a user development fee? Development Fee (DF) is primarily intended to fund the establishment or upgradation of an airport. It is intended to bridge the gap between the cost of the project and the finance available with the airport operator. Currently only the Mumbai and Delhi Airports levy a DF. However, there are other types of tariffs, such as a user development fee (UDF), which may be levied by the airports. UDF is generally regarded as a revenue enhancing measure. It is levied by the airport operators to meet operational expenditure Section 22 A of the Airports Authority Act, 1994 (amended in 2003) gives the Airport Authority of India (AAI) the power to levy and collect a development fee on embarking passengers. The Act provides that the development fee can be utilised only for: (a) funding or financing the upgradation of the airport; (b) establishing a new airport in lieu of the airport at which is levied; and (c) investing in shares of a private airport in lieu of an existing airport . Unlike DF, UDF is not levied and collected under the Airport Authority of India Act but under Rule 89 of the Aircraft Rules, 1937. Under the Aircraft Rules, UDF may be levied and collected by either the AAI or the private operator. According to the Airport Economic Regulatory Authority, UDF is levied to ensure that the airport operators can get a fair return on their investments. What is the role of the Airport Economic Regulatory Authority? In 2008, the Airport Economic Regulatory Authority (AERA) was established to regulate aeronautical tariffs. Among others, AERA’s functions include determining the amount of DF and UDF for major airports. In case of non-major airports, the UDF shall be determined by the central government. What has been the role of the Supreme Court? In 2009, the central government permitted the Mumbai and Delhi Airports to levy a DF. The rate of was prescribed by the central government and not by AERA. In 2011, the Supreme Court held that this levy of DF was illegal. The Court based its decision on two grounds. Firstly, the court held that the rate of DF has to be determined by the AERA and not the central government. Secondly, the Court held that the power to levy the fee lies with the Airport Authority as the development fee can only be utilised for the performance of the purpose specified in the Act. The court held that while the Airport Authority can utilise the development fee for any of the functions prescribed in the Act, it can assign the power to levy a development fee to a private operator only for funding or financing the upgradation or expansion of the airport. Can private operators collect a development fee and a user development fee? In 2003, the government amended the Airport Authority of India Act to allow the AAI with the prior permission of the central government to: (i) to lease the premises of airports to private entities to undertake some of the functions of the AAI; (ii) levy and collect a development fee on the embarking passengers at a rate that may be prescribed. Till 2011, the power to collect the development fee lay only with the Airport Authority. However with the notification of the Airports Authority of India (Major Airports) Development Fees Rules, 2011, private operators have also been permitted to collect the development fee.
The counting of votes for General Election 2019, which concluded on Sunday, will begin tomorrow, i.e., 23rd May at 8 AM. The election was conducted in 7 phases for 543 constituencies of Lok Sabha. The Election Commission of India (ECI) uses Electronic Voting Machines (EVM) to conduct elections. Since 2000, ECI has conducted 113 assembly elections and three general elections using EVMs.[1] Voter Verified Paper Audit Trail (VVPAT) system was added to EVMs in 2013 to increase transparency and improve voter confidence in the system. The VVPAT system generates a printed paper slip bearing the name and election symbol of the candidate. On April 8, 2019, Supreme Court instructed the ECI that printed VVPAT slips from randomly selected five polling stations in each assembly segment of a parliamentary constituency should be matched with EVMs.[2] In this blog, we explain the election counting process in India.
Who is responsible for counting the votes?
The Returning Officer (RO) is responsible for conducting elections in a constituency, which also includes counting of votes.[3] The RO is an officer of the government or a local authority nominated by the ECI for each constituency in consultation with the state government.[4]
Where does the counting take place?
The RO decides the place where the votes will be counted for the parliamentary constituency. The date and time of counting is fixed by the ECI. Ideally counting of votes for a constituency should be done at one place, preferably at the Headquarter of the RO in that constituency. It should be performed under the direct supervision of the RO. However, each Parliamentary Constituency has multiple assembly segments. In this situation, counting can take place at different locations for various assembly segments under the direct supervision of an Assistant Returning Officer (ARO).
Layout of the Counting Hall
Page 431, Handbook for Returning Officer Document 23 Edition 1, Election Commission of India
Counting of votes for each assembly segment of a parliamentary constituency is performed in a single hall. In each round of counting, votes from 14 EVMs are counted. In case of simultaneous parliamentary and assembly elections, such as Odisha, the first seven tables are used for counting votes for assembly elections, and the rest for parliamentary elections.
In constituencies with a large number of candidates, it may not be possible to count votes for all candidates in a single hall without overcrowding it. In such a situation, the number of counting halls or tables can be increased with the prior permission of the ECI. A hall can also be used for counting votes of another assembly segment after the results of the first segment are declared. However, counting may be done for only one assembly segment in a hall at any point of time.
What is the counting process?
Counting is performed by counting supervisors appointed by the RO. Counting staff is appointed through a three stage randomisation process to ensure impartiality. Candidates along with their counting agents and election agents are also present in the counting hall.
Counting of votes begins with Electronically Transmitted Postal Ballots (ETPB) and Postal Ballots (PB). These votes are counted under the direct supervision of the RO. Counting of EVMs can start 30 minutes after the commencement of PB counting, even if all PBs have not been counted. At the end of each round of counting, the results from 14 EVMs are declared.
What is the process for counting VVPAT slips?
The ECI prescribes the process for randomly selecting one EVM for each assembly segment of a parliamentary constituency for VVPAT matching. The verification of VVPAT paper slips is conducted inside a secured VVPAT Counting Booth in the counting hall with access to authorised personnel only. Any counting table in the hall can be converted into VVPAT Counting Booth after completing EVM vote counting. Parliamentary constituencies generally have between five and ten assembly segments.
The Supreme Court has decided that VVPAT slips of five randomly selected polling stations for each assembly segment shall be matched with the result shown in the respective EVMs. This implies that VVPAT paper slips need to be matched for about 25-50 machines for each parliamentary constituency. This process requires personal supervision of RO/ARO. The ECI has decided that the counting of five VVPATs will be done sequentially.[5] The RO can declare the final result for the constituency after the VVPAT matching process has been completed.
What happens if there is a discrepancy between the VVPAT count and the EVM results?
In such a case, the printed paper slips count is taken as final. The ECI has not clarified whether there would be any further action (such as counting of all VVPATs in a constituency or assembly segment) if there is a discrepancy in the counts of one of the five VVPATs.
[1] https://www.eci.gov.in/files/file/8756-status-paper-on-evm-edition-3/.
[2] N Chandrababu Naidu and Ors. v. Union of India and Anr WP(C). 273/2019 decided on April 8, 2019.
[3] https://www.eci.gov.in/files/file/9400-hand-book-for-returning-officer-february-2019/.
[4] https://www.eci.gov.in/faqs/elections/election-machinery/faqs-election-machinery-r1/.
[5] https://www.eci.gov.in/files/file/10197-mandatory-verification-of-vvpat-paper-slips-regarding/.
