We wrote an FAQ on the Lok Pal Bill for Rediff. http://www.rediff.com/news/special/special-parliamentary-committee-cannot-study-lokpal-bill-in-10-days/20110822.htm The Lok Pal Bill has been referred to the Standing Committee of Parliament on Personnel, Public Grievances, Law and Justice. In this FAQ, we explain the process of these Committees. What is the role of such standing committees? The system of departmentally related standing committees was instituted by Parliament in 1993. Currently, there are 24 such committees, organised on the lines of departments and ministries. For example, there are committees on finance, on home affairs, on defence etc. These standing committees examine Bills that are referred to them. They also examine the expenditure plans of ministries in the Union Budget. In addition, they may examine the working of the departments and various schemes of the government. How is the membership of these committees decided? Each committee has 31 members: 21 from Lok Sabha and 10 from Rajya Sabha. Parties are allocated seats based on their strength in Parliament. The final membership is decided based on the MP’s area of interest as well as their party’s decision on allocating the seats. Who chairs the committees? Of the 24 committees, 16 are administered by Lok Sabha and eight by Rajya Sabha. The Chairperson is from the respective House. Political parties are allocated the chairs based on their strength in Parliament. Some committees such as home affairs, finance and external affairs are customarily chaired by a senior member of an opposition party. What will the Standing Committee do with the Lok Pal Bill? The Committee has invited comments and suggestions from the public on the Bill. Comments can be sent to Mr. KP Singh, Director, Rajya Sabha Secretariat, 201, Second Floor, Parliament House Annexe, New Delhi -110001. These may also be emailed to kpsingh@sansad.nic.in or rs-cpers@sansad.nic.in. The Committee will examine the written memoranda. They will also invite some experts and stakeholders for oral evidence. Based on its examination, the committee will prepare a report with its recommendations on the various provisions of the Bill. This report will be tabled in Parliament. Is the report decided by voting? No. The committee tries to form a consensus while preparing the report. However, if some members do not agree on any point, they may add a dissent note. For example, the committee on the Civil Liability for Nuclear Damages Bill had dissent notes written by MPs from the left parties. The Women’s Reservation Bill also had dissent notes from a couple of members. Are the committee’s recommendations binding? No. The Committee system was formed recognising that Parliament does not have the time for detailed examination and public feedback on all bills. Parliament, therefore, delegates this task to the committee which reports back with its recommendations. It is the role of all MPs in each House of Parliament to examine the recommendations and move suitable amendments. Following this, Parliament can vote on these amendments, and finalise the Bill. Can you give examples when the Committee’s work has resulted in significant changes? There are many such instances. For example, the standing committee on science and technology examined the Civil Liability for Nuclear Damages Bill. The committee made several recommendations, some of which increased the potential liability of suppliers of nuclear equipment in case of an accident. All the recommendations were accepted. Similarly, the Seeds Bill, which is currently pending in Rajya Sabha has seen several major recommendations by the Committee on Agriculture. The government has agreed to move amendments that accept many of these recommendations. Are all Bills referred to Standing Committees? Most Bills are referred to such committees but this is not a mandatory requirement before passing a Bill. In some cases, if a Bill is not referred to a committee and passed by one House, the other House may constitute a select committee for detailed examination. Some recent examples include such select committees formed by the Rajya Sabha on the Prevention of Torture Bill, the Wakf Amendment Bill, and the Commercial Divisions of High Courts Bill. There are also some instances when a Bill may be passed without the committee process. Is it a good idea to bypass the committee process? In general, this process provides a platform for various stakeholders to provide their inputs. In the Lok Pal case, a few influential groups such as the India Against Corruption (IAC) and the National Campaign for People’s Right to Information (NCPRI) have voiced their views. However, there may be other points of views of persons who do not have similar access to the media. The Standing Committee provides equal opportunity to everyone to write in their memoranda. It also allows parliamentarians to devote a significant amount of time to understand the nuances of a Bill and make suitable modifications. Thus, the standing committee system is an opportunity to strengthen legislation in an informed and participatory manner. Is it feasible to compress this process within 10 days and get the Lok Pal Bill passed within the current session of Parliament? There should be sufficient time for citizens to provide inputs to the committee. The committee has to examine the different points of view and find suitable provisions to achieve the final objectives. For example, there are divergent views on the role of Lok Pal, its constitution, its jurisdiction etc. The Committee has to understand the implications of the various proposals and then make its recommendations. It has been given three months to do so. Typically, most committees ask for an extension and take six to eight months. It is not practical to expect this process to be over within 10 days. Should civil society demand that the government issue a whip and pass the Jan Lok Pal Bill? Everyone has the right to make any demand. However, the government is duty bound to follow the Constitution. Our Constitution has envisaged a Parliamentary system. Each MP is expected to make up their minds on each proposal based on their perception of national interest and people’s will. Indeed, one may say that the best way to ensure a representative system is to remove the anti-defection law, minimise the use of whips, and let MPs vote their conscience. That may give us a more accountable government.
Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts. It had first recommended these names earlier this year and in August last year, but these appointments were not made. The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts). Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases. As of today, more than four crore cases are pending across all courts in India. In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.
High vacancy of judges across courts
Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges. Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually. However, vacancies persist due to insufficient appointments (see Figures 1 and 2). Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts).
|
Figure 1: Vacancy of judges in High Courts |
Figure 2: Vacancy of judges in subordinate courts |
|
|
|
|
Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS. |
|
As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34). Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098). Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges. In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3). The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled.
|
Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021)
|
|
Source: Vacancy Statement, Department of Justice; PRS. |
Appointments of High Court judges are guided by a memorandum of procedure. As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs. However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts. Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court. No timeline is prescribed for this stage of the appointment process. In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.
As of today, over 3.6 crore cases are pending before subordinate courts in India. As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts. Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4). Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.
For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.
Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)
|
|
|
Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS. |
How many judges do we need?
The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary. Lack of adequate number of judges means a greater workload per judge. Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts. Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1).
Table 1: Methods recommended for calculating the required number of judges for subordinate courts
|
Method of calculation |
Recommendation and its status |
|
Judge-to-population ratio: optimum number of judges per million population |
The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people. This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002). For 2020, the judge-to-population ratio was 21 judges per million population. Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts. |
|
Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge |
The Law Commission of India (2014) proposed this method. It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions. |
|
Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions |
The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method. It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts. In 2017, the Supreme Court accepted this model. |
|
Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study |
Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts. It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court. The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi. |
Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.
