Earlier today, the Union Cabinet announced the merger of the Railways Budget with the Union Budget. All proposals under the Railways Budget will now be a part of the Union Budget. However, to ensure detailed scrutiny, the Ministry’s expenditure will be discussed in Parliament. Further, Railways will continue to maintain its autonomy and financial decision making powers. In light of this, this post discusses some of the ways in which Railways is financed, and issues it faces with regard to financing. Separation of Railways Budget and its financial implications The Railways Budget was separated from the Union Budget in 1924. While the Union Budget looks at the overall revenue and expenditure of the central government, the Railways Budget looks at the revenue and expenditure of the Ministry of Railways. At that time, the proportion of Railways Budget was much higher as compared to the Union Budget. The separation of the Budgets was done to ensure that the central government receives an assured contribution from the Railways revenues. However, in the last few years, Railways’ finances have deteriorated and it has been struggling to generate enough surplus to invest in improving its infrastructure. Indian Railways is primarily financed through budgetary support from the central government, its own internal resources (freight and passenger revenue, leasing of railway land, etc.), and external resources (market borrowings, public private partnerships, joint ventures, or market financing). Every year, all ministries, except Railways, get support from the central government based on their estimated revenue and expenditure for the year. The Railways Ministry is provided with a gross budgetary support from the central government in order to expand its network. However, unlike other Ministries, Railways pays a return on this investment every year, known as dividend. The rate of this dividend is currently at around 5%, and also includes the interest on government budgetary support received in the previous years. Various Committees have observed that the system of receiving support from the government and then paying back dividend is counter-productive. It was recommended that the practice of paying dividend can be avoided until the financial health of Railways improves. In the announcement made today, the requirement to pay dividend to the central government has been removed. This would save the Ministry from the liability of paying around Rs 9,700 crore as dividend to the central government every year. However, Railways will continue to get gross budgetary support from the central government. Declining internal revenue In addition to its core business of providing transportation, Railways also has several social obligations such as: (i) providing certain passenger and coaching services at below cost fares, (ii) running uneconomic branch lines (connectivity to remote areas), and (iii) granting concessions to various categories of people (like senior citizens, children, etc.). All these add up to about Rs 30,000 crore. Other inelastic expenses of Railways include pension charges, fuel expenses, lease payments, etc. Such expenses do not leave any financial room for the Railways to make any infrastructure investments. 
In the last few years, Railways has been struggling due to a decline in its revenue from passenger and freight traffic. In addition, the support from the central government has broadly remained constant. In 2015-16, the gross budgetary support and internal revenue saw a decline, while there was some increase in the extra budgetary resources (shown in Figure 1). Railways’ internal revenue primarily comes from freight traffic (about 65%), followed by passenger traffic (about 25%). About one-third of the passenger revenue comes from first class passenger traffic and the remaining two-third comes from second class passenger traffic. In 2015-16, Railways passenger traffic decreased by 4% and total passenger revenue decreased by 10% from the budget estimates. While revenue from second class saw a decrease of 13%, revenue from first class traffic decreased by 3%. In the last few years, Railways’ internal sources have been declining, primarily due to a decline in both passenger as well as freight traffic. Freight traffic 
The share of Railways in total freight traffic has declined from 89% to 30% over the last 60 years, with most of the share moving towards roads (see Figure 2). With regard to freight traffic, Railways generates most of its revenue from the transportation of coal (about 44%), followed by cement (8%), iron ore (7%), and food-grains (7%). In 2015-16, freight traffic decreased by 10%, and freight earnings reduced by 5% from the budget estimates. The Railways Budget for 2016-17 estimates an increase of 12% in passenger revenue and a 0.26% increase in passenger traffic. Achieving a 12% increase in revenue without a corresponding increase in traffic will require an increase in fares. Flexi fares and passenger traffic A few days ago, the Ministry of Railways introduced a flexi-fare system for certain categories of trains. Under this system, the base fare for Rajdhani, Duronto and Shatabdi trains will increase by 10% with every 10% of berths sold, subject to a ceiling of up to 1.5 times the base fare. While this could also be a way for Railways to improve its revenue, it has raised concerns about train fares becoming more expensive. Note that the flexi-fare system will apply only to first class passenger traffic, which contributes to about 8% of the total Railways revenue. It remains to be seen if the new system increases Railways revenue, or further decreases passenger traffic (people choosing other modes of travel, such as airways, if fares increase significantly). While the Railways is trying to improve revenue by raising fares, this may increase the financial burden on passengers. In the past, various Parliamentary Committees have observed that the investment planning in Railways from the government’s side is politically driven rather than need driven. This has resulted in the extension of uneconomic, un-remunerative, yet socially desirable projects in every budget. It has been recommended that projects based on social and commercial considerations must be categorised separately in the Railways accounts, and funding for the former must come from the central or state governments. It has also been recommended that Railways should bring in more accuracy in determining its public service obligations. The decision to merge the Railways Budget with the Union Budget seems to be on the lines of several of these recommendations. However, it remains to be seen whether merging the Railway Budget with the Union Budget will improve the transporter’s finances or if it would require bringing in more reforms.
Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts. It had first recommended these names earlier this year and in August last year, but these appointments were not made. The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts). Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases. As of today, more than four crore cases are pending across all courts in India. In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.
High vacancy of judges across courts
Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges. Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually. However, vacancies persist due to insufficient appointments (see Figures 1 and 2). Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts).
|
Figure 1: Vacancy of judges in High Courts |
Figure 2: Vacancy of judges in subordinate courts |
|
|
|
|
Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS. |
|
As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34). Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098). Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges. In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3). The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled.
|
Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021)
|
|
Source: Vacancy Statement, Department of Justice; PRS. |
Appointments of High Court judges are guided by a memorandum of procedure. As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs. However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts. Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court. No timeline is prescribed for this stage of the appointment process. In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.
As of today, over 3.6 crore cases are pending before subordinate courts in India. As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts. Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4). Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.
For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.
Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)
|
|
|
Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS. |
How many judges do we need?
The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary. Lack of adequate number of judges means a greater workload per judge. Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts. Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1).
Table 1: Methods recommended for calculating the required number of judges for subordinate courts
|
Method of calculation |
Recommendation and its status |
|
Judge-to-population ratio: optimum number of judges per million population |
The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people. This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002). For 2020, the judge-to-population ratio was 21 judges per million population. Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts. |
|
Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge |
The Law Commission of India (2014) proposed this method. It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions. |
|
Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions |
The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method. It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts. In 2017, the Supreme Court accepted this model. |
|
Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study |
Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts. It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court. The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi. |
Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.
