Recently, there have been reports of price crashes and distress sales in case of farm produce, such as tomatoes, mangoes, and garlic. In some cases, farmers have dumped their produce on roads. Produce such as fruits and vegetables are perishable and therefore have a short shelf life. Further, due to inadequate storage facilities and poor food processing infrastructure farmers have limited options but to sell the produce at prevailing market prices. This can lead to distress sales or roadside discards (in some cases to avoid additional cost of transportation).
Food processing allows raw food to be stored, marketed, or preserved for consumption later. For instance, raw agricultural produce such as fruits may be processed into juices, jams, and pickles. Activities such as waxing (for preservation), packaging, labelling, or ripening of produce also form part of the food processing industry.
Between 2001-02 and 2016-17, production of food grains grew annually at 1.7% on average. Production of horticulture crops surpassed food grains with an average growth rate of 4.8%. While production has been increasing over the years, surplus produce tends to go waste at various stages such as procurement, storage, and processing due to lack of infrastructure such as cold storages and food processing units.
Source: Horticulture Statistics at a Glance 2017, Union Budget 2018-19; PRS.
Losses high among perishables such as fruits and vegetables
Crop losses ranged between 7-16% among fruits and around 5% among cereals in 2015. The highest losses were witnessed in case of guava, followed by mango, which are perishable fruits. Perishables such as fruits and vegetables are more prone to losses as compared to cereals. Such crop losses can occur during operations such as harvesting, thrashing, grading, drying, packaging, transportation, and storage depending upon the commodity.
It was estimated that the annual value of harvest and post-harvest losses of major agricultural products at the national level was Rs 92,651 crore in 2015. The Standing Committee on Agriculture (2017) stated that such wastage can be reduced with adequate food processing facilities.
Sources: Annual Report 2016-17, Ministry of Food Processing Industries; PRS.
Inadequate food processing infrastructure
As previously discussed, perishables such as fruits and vegetables are more prone to damages as compared to cereals. Due to inadequate processing facilities in close proximity, farmers may be unable to hold their produce for a long time. Hence, they may be forced to sell their produce soon after harvest, irrespective of the prevailing market situations. Expert committees have recommended that agri-logistics such as cold chain infrastructure and market linkages should be strengthened.
Cold chain infrastructure: Cold chain infrastructure includes processing units, cold storages, and refrigerated vans. As of 2014, out of a required cold storage capacity of 35 million metric tonnes (MT), almost 90% (31.8 million MT) of the capacity was available (see Table 1). However, cold storage needs to be coupled with logistical support to facilitate smooth transfer of harvested value from farms to distant locations. This includes: (i) pack-houses for packaging and preparing fresh produce for long distance transport, (ii) refrigerated transport such as reefer vehicles, and (iii) ripening chambers to ripen raw produce before marketing. For instance, bananas which are harvested raw may be ripened in these chambers before being marketed.
While there are sufficient cold storages, there are wide gaps in the availability of other associated infrastructure. This implies that even though almost 90% (32 million tonnes) of cold storage capacity is available, only 15% of the required refrigerated transport exists. Further, the shortfall in the availability of infrastructure necessary for safe handling of farm produce, like pack-houses and ripening chambers, is over 90%.
Table 1: Gaps in cold chain infrastructure (2014)
| Facility | Required | Available | Gap | % gap |
| Cold storage (in million MT) |
35.1 |
31.8 | 3.2 |
9.3% |
| Pack-houses |
70,080 |
249 | 69,831 |
99.6% |
| Reefer vehicles |
61,826 |
9,000 | 52,826 |
85.4% |
| Ripening chambers |
9,131 |
812 | 8,319 |
91.1% |
To minimise post-harvest losses, the Standing Committee (2017) recommended that a country-wide integrated cold chain infrastructure network at block and district levels should be created. It further recommended that a Cold Chain Coordination and Monitoring Committee should be constituted at the district-level. The Standing Committee also recommended that farmers need to be trained in value addition activities such as sorting, grading, and pre-cooling harvested produce through facilities such as freezers and ripening chambers.
Between 2008 and 2017, 238 cold chain projects were sanctioned under the Scheme for Integrated Cold Chain and Value Addition Infrastructure. Grants worth Rs 1,775 crore were approved for these projects. Of this amount, Rs 964 crore (54%) has been released as of January 2018. Consequently, out of the total projects sanctioned, 114 (48%) are completed. The remaining 124 projects are currently under implementation.
Transport Facilities: Currently, majority of food grains and certain quantities of tea, potato, and onion are transported through railways. The Committee on Doubling Farmers Income had recommended that railways needs to upgrade its logistics to facilitate the transport of fresh produce directly to export hubs. This includes creation of adjoining facilities for loading and unloading, and distribution to road transport.
Mega Food Parks: The Mega Food Parks scheme was launched in 2008. It seeks to facilitate setting up of food processing units. These units are to be located at a central processing centre with infrastructure required for processing, packaging, quality control labs, and trade facilitation centres.
As of March 2018, out of the 42 projects approved, 10 were operational. The Standing Committee on Agriculture noted certain reasons for delay in implementation of projects under the scheme. These include: (i) difficulty in getting loans from banks for the project, (ii) delay in obtaining clearances from the state governments and agencies for roads, power, and water at the project site, (iii) lack of special incentives for setting up food processing units in Mega Food Parks, and (iv) unwillingness of the co-promoters in contributing their share of equity.
Further, the Standing Committee stated that as the scheme requires a minimum area of 50 acres, it does not to promote smaller or individual food processing and preservation units. It recommended that smaller agro-processing clusters near production areas must be promoted. The Committee on Doubling Farmers Income recommended establishment of processing and value addition units at strategic places. This includes rural or production areas for pulses, millets, fruits, vegetables, dairy, fisheries, and poultry in public private-partnership mode.
We wrote an FAQ on the Lok Pal Bill for Rediff. http://www.rediff.com/news/special/special-parliamentary-committee-cannot-study-lokpal-bill-in-10-days/20110822.htm The Lok Pal Bill has been referred to the Standing Committee of Parliament on Personnel, Public Grievances, Law and Justice. In this FAQ, we explain the process of these Committees. What is the role of such standing committees? The system of departmentally related standing committees was instituted by Parliament in 1993. Currently, there are 24 such committees, organised on the lines of departments and ministries. For example, there are committees on finance, on home affairs, on defence etc. These standing committees examine Bills that are referred to them. They also examine the expenditure plans of ministries in the Union Budget. In addition, they may examine the working of the departments and various schemes of the government. How is the membership of these committees decided? Each committee has 31 members: 21 from Lok Sabha and 10 from Rajya Sabha. Parties are allocated seats based on their strength in Parliament. The final membership is decided based on the MP’s area of interest as well as their party’s decision on allocating the seats. Who chairs the committees? Of the 24 committees, 16 are administered by Lok Sabha and eight by Rajya Sabha. The Chairperson is from the respective House. Political parties are allocated the chairs based on their strength in Parliament. Some committees such as home affairs, finance and external affairs are customarily chaired by a senior member of an opposition party. What will the Standing Committee do with the Lok Pal Bill? The Committee has invited comments and suggestions from the public on the Bill. Comments can be sent to Mr. KP Singh, Director, Rajya Sabha Secretariat, 201, Second Floor, Parliament House Annexe, New Delhi -110001. These may also be emailed to kpsingh@sansad.nic.in or rs-cpers@sansad.nic.in. The Committee will examine the written memoranda. They will also invite some experts and stakeholders for oral evidence. Based on its examination, the committee will prepare a report with its recommendations on the various provisions of the Bill. This report will be tabled in Parliament. Is the report decided by voting? No. The committee tries to form a consensus while preparing the report. However, if some members do not agree on any point, they may add a dissent note. For example, the committee on the Civil Liability for Nuclear Damages Bill had dissent notes written by MPs from the left parties. The Women’s Reservation Bill also had dissent notes from a couple of members. Are the committee’s recommendations binding? No. The Committee system was formed recognising that Parliament does not have the time for detailed examination and public feedback on all bills. Parliament, therefore, delegates this task to the committee which reports back with its recommendations. It is the role of all MPs in each House of Parliament to examine the recommendations and move suitable amendments. Following this, Parliament can vote on these amendments, and finalise the Bill. Can you give examples when the Committee’s work has resulted in significant changes? There are many such instances. For example, the standing committee on science and technology examined the Civil Liability for Nuclear Damages Bill. The committee made several recommendations, some of which increased the potential liability of suppliers of nuclear equipment in case of an accident. All the recommendations were accepted. Similarly, the Seeds Bill, which is currently pending in Rajya Sabha has seen several major recommendations by the Committee on Agriculture. The government has agreed to move amendments that accept many of these recommendations. Are all Bills referred to Standing Committees? Most Bills are referred to such committees but this is not a mandatory requirement before passing a Bill. In some cases, if a Bill is not referred to a committee and passed by one House, the other House may constitute a select committee for detailed examination. Some recent examples include such select committees formed by the Rajya Sabha on the Prevention of Torture Bill, the Wakf Amendment Bill, and the Commercial Divisions of High Courts Bill. There are also some instances when a Bill may be passed without the committee process. Is it a good idea to bypass the committee process? In general, this process provides a platform for various stakeholders to provide their inputs. In the Lok Pal case, a few influential groups such as the India Against Corruption (IAC) and the National Campaign for People’s Right to Information (NCPRI) have voiced their views. However, there may be other points of views of persons who do not have similar access to the media. The Standing Committee provides equal opportunity to everyone to write in their memoranda. It also allows parliamentarians to devote a significant amount of time to understand the nuances of a Bill and make suitable modifications. Thus, the standing committee system is an opportunity to strengthen legislation in an informed and participatory manner. Is it feasible to compress this process within 10 days and get the Lok Pal Bill passed within the current session of Parliament? There should be sufficient time for citizens to provide inputs to the committee. The committee has to examine the different points of view and find suitable provisions to achieve the final objectives. For example, there are divergent views on the role of Lok Pal, its constitution, its jurisdiction etc. The Committee has to understand the implications of the various proposals and then make its recommendations. It has been given three months to do so. Typically, most committees ask for an extension and take six to eight months. It is not practical to expect this process to be over within 10 days. Should civil society demand that the government issue a whip and pass the Jan Lok Pal Bill? Everyone has the right to make any demand. However, the government is duty bound to follow the Constitution. Our Constitution has envisaged a Parliamentary system. Each MP is expected to make up their minds on each proposal based on their perception of national interest and people’s will. Indeed, one may say that the best way to ensure a representative system is to remove the anti-defection law, minimise the use of whips, and let MPs vote their conscience. That may give us a more accountable government.
