The last few days have seen repeated disruptions in Parliament. In an Opinion Editorial published in the Indian Express, Chakshu Roy of PRS Legislative Research discusses the impact of the current disruptions on Parliament. His analysis points to how disruptions are an opportunity lost to hold the government accountable and to deliberate on significant legislative and policy issues. The second half of the budget session commenced last week with hardly any business transacted due to disruptions on different issues. This is not new. The 15th Lok Sabha has seen entire parliamentary sessions lost without any work being done. As it nears the end of its term, Parliament's productive time stands at 70 per cent, which is significantly lower than that of previous Lok Sabhas. As disruptions in Parliament have become routine, public reaction to such disruptions has also become predictable. Figures depicting the quantum of taxpayers' money lost every hour that Parliament does not function start doing the rounds, and the cry for docking the salary of disrupting members of Parliament becomes louder. What does not get adequate attention is the opportunity lost for holding the government accountable and deliberating on important legislative and policy issues. MPs are required to keep the government in check and oversee its functioning. One of the ways in which they do so is by asking ministers questions about the work done by their ministries. Ministers respond to such questions during the first hour of Parliament, which is known as question hour. During this hour, 20 questions are slotted for oral responses by ministers. Based on the response, MPs can cross-question and corner the minister by asking supplementary questions. On certain occasions, they are also able to extract assurances from the minister to take action on certain issues. When question hour is disrupted, not only are these opportunities lost, it also leads to ineffective scrutiny of the work done by the various ministries of the government. Last week, some of the questions that could not be orally answered related to four-laning of highways, performance of public sector steel companies, supply of food grains for welfare schemes, and generic versions of cancer drugs. In 2012, out of the 146 hours allocated for question hour in both Houses of Parliament, roughly only 57 hours were utilised. Since the beginning of the 15th Lok Sabha in 2009, approximately 43 per cent of the allocated time has been spent on question hour. When Parliament is disrupted regularly, its capacity to make laws is affected. Excluding routine financial legislation, since 2009, the government had planned to introduce 390 bills. So far, it has been able to introduce only 187 of them. It had also planned to have 365 bills scrutinised and passed by Parliament. So far, 96 of them have received parliamentary approval. Disruptions in Parliament also eat into the time available for discussing a bill in the house. In Lok Sabha, roughly 35 per cent of bills were passed with an hour or less of debate, a case being the sexual harassment bill, which was passed by Lok Sabha in September of last year in 16 minutes. Some would argue that since parliamentary committees scrutinise most bills in detail, there is no harm done if the bills are not debated in the House. However scrutiny of a bill behind closed doors is hardly a substitute for spirited debates on the merits and demerits of a bill on the floor of the House. Currently there are 115 bills awaiting parliamentary scrutiny and approval. Important social and economic legislation is currently pending before Parliament. The food security bill, the land acquisition bill, the companies and the goods and services tax bill are just a few of them. Out of the laundry list of pending bills, some are political and may be stuck in Parliament till consensus around them can be built. But there are a number of bills that are administrative in nature, and have no political undercurrents and are possibly not coming up for discussion because of the limited time that is available for legislative debate on account of frequent disruptions. In September 1997, to celebrate the golden jubilee of the country's Independence, a special session of Parliament was convened. At this special session, MPs had resolved to preserve and enhance the dignity of Parliament by adhering to the rules of procedure of Parliament relating to the orderly conduct of parliamentary proceedings. Last year, Parliament completed 60 years since its first sitting. To mark the occasion, another special session of both Houses was convened, where MPs had resolved to uphold the dignity, sanctity and supremacy of Parliament. Ensuring that the proceedings of both Houses run smoothly so that Parliament can discharge its responsibility effectively is the best way of ensuring its supremacy. The question that needs to be asked is whether our members of Parliament are ready to stand by the resolutions that they voluntarily adopted.
Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts. It had first recommended these names earlier this year and in August last year, but these appointments were not made. The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts). Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases. As of today, more than four crore cases are pending across all courts in India. In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.
High vacancy of judges across courts
Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges. Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually. However, vacancies persist due to insufficient appointments (see Figures 1 and 2). Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts).
|
Figure 1: Vacancy of judges in High Courts |
Figure 2: Vacancy of judges in subordinate courts |
|
|
|
|
Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS. |
|
As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34). Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098). Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges. In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3). The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled.
|
Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021)
|
|
Source: Vacancy Statement, Department of Justice; PRS. |
Appointments of High Court judges are guided by a memorandum of procedure. As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs. However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts. Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court. No timeline is prescribed for this stage of the appointment process. In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.
As of today, over 3.6 crore cases are pending before subordinate courts in India. As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts. Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4). Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.
For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.
Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)
|
|
|
Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS. |
How many judges do we need?
The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary. Lack of adequate number of judges means a greater workload per judge. Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts. Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1).
Table 1: Methods recommended for calculating the required number of judges for subordinate courts
|
Method of calculation |
Recommendation and its status |
|
Judge-to-population ratio: optimum number of judges per million population |
The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people. This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002). For 2020, the judge-to-population ratio was 21 judges per million population. Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts. |
|
Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge |
The Law Commission of India (2014) proposed this method. It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions. |
|
Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions |
The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method. It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts. In 2017, the Supreme Court accepted this model. |
|
Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study |
Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts. It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court. The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi. |
Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.
