Mr. Ramnath Kovind completes his tenure as President in July.  With the Election Commission of India expected to notify the election dates this week, we look at how India will elect its next President.  

As the Head of the State, the President is a key part of Parliament.  The President calls the two Houses of Parliament into session on the advice of the Council of Ministers.  A Bill passed by the Lok Sabha and Rajya Sabha does not become a law unless assented to by the President.  Further, when Parliament is not in session, the President holds the power to sign a law with immediate effect through an Ordinance.

Who elects the President?

The manner of election of the President is provided in Article 55 of the Constitution.  Members of Parliament and Members of Legislative Assemblies (MPs and MLAs) including elected representatives from the Union Territories (UTs) of Delhi and Puducherry form the electoral college, which elects the President.  At least 50 elected representatives must propose a candidate, who must then be seconded by 50 other electors to run for the President's office.  Members of Legislative Councils and the 12 nominated members of Rajya Sabha do not participate in the voting process.

The history behind having proposers and seconders 
The requirement of having a certain number of electors propose a candidate was introduced after the experience of the first five Presidential elections.  It was common then for several candidates to put themselves up for election when they did not have a remote chance of getting elected.  In the 1967 Presidential elections, 17 candidates contested, but nine of them did not win a single vote.  This repeated again in the 1969 elections, when out of 15 candidates, five did not secure any votes.

To discourage the practice, candidates had to secure at least 10 proposers and seconders each to contest the elections from the 1974 election onwards.  A compulsory security deposit of Rs 2,500 was also introduced.  The changes were brought in through an amendment to the Presidential and Vice-Presidential Act, 1952

In 1997, the Act was further amended to increase the security deposit to Rs 15,000 and the minimum number of proposers and seconders to 50 each.


How are the votes calculated?

The Presidential election uses a special voting to tally the votes.  A different voting weightage is assigned to an MP and an MLA.  The value of each MLA's vote is determined based on the population of their state and the number of MLAs.  For instance, an MLA from UP has a value of 208 while an MLA from Sikkim has 7 (see Table 1).  Due to a Constitutional Amendment passed in 2002, the population of the state as per the 1971 census is taken for the calculation.

The value of an MP's vote is the sum of all votes of MLAs across the country divided by the number of elected MPs.  

How will the numbers look in 2022?

In the 2017 Presidential elections, electors from 31 states and the UTs of Delhi and Puducherry participated. However, in 2019, with the Jammu and Kashmir (J&K) Reorganization Act, the number of states were reduced to 30. The J&K Assembly was dissolved as per the Act and a new legislature for the UT of J&K is yet to be reconstituted. UTs with legislatures were not originally part of the electoral college for the election of the President. The Constitution was amended in 1992 to specifically include the UTs of Delhi and Puducherry. Note that for MLAs from J&K to participate in future Presidential elections, a similar Constitutional amendment would be required to be passed by Parliament.

Based on the assumption that J&K is not included in the 2022 Presidential election, the total number of votes of MLAs in 2022 elections will have to be adjusted.  The 87 Jammu and Kashmir MLAs must be removed from the total number of MLAs of 4,120.  Jammu and Kashmir’s contributing vote share of 6,264 must also be reduced from the total vote share of 549,495.  Adjusting for these changes, 4,033 MLAs will participate in the 2022 elections and the combined vote share of all MLAs will add up to 543,231.

Table 1: The value of votes of elected MLAs of different states at the 2017 Presidential Election

Name of State

Number of Assembly seats

Population (1971 Census)

Value of vote of each MLA

Total value of votes for the state (B x D)

A

B

C

D

E

Andhra Pradesh

175

2,78,00,586

159

27,825

Arunachal Pradesh

60

4,67,511

8

480

Assam

126

1,46,25,152

116

14,616

Bihar

243

4,21,26,236

173

42,039

Chhattisgarh

90

1,16,37,494

129

11,610

Goa

40

7,95,120

20

800

Gujarat

182

2,66,97,475

147

26,754

Haryana

90

1,00,36,808

112

10,080

Himachal Pradesh

68

34,60,434

51

3,468

Jammu and Kashmir

87

63,00,000

72

6,264

Jharkhand

81

1,42,27,133

176

14,256

Karnataka

224

2,92,99,014

131

29,344

Kerala

140

2,13,47,375

152

21,280

Madhya Pradesh

230

3,00,16,625

131

30,130

Maharashtra

288

5,04,12,235

175

50,400

Manipur

60

10,72,753

18

1,080

Meghalaya

60

10,11,699

17

1,020

Mizoram

40

3,32,390

8

320

Nagaland

60

5,16,449

9

540

Odisha

147

2,19,44,615

149

21,903

Punjab

117

1,35,51,060

116

13,572

Rajasthan

200

2,57,65,806

129

25,800

Sikkim

32

2,09,843

7

224

Tamil Nadu

234

4,11,99,168

176

41,184

Telangana

119

1,57,02,122

132

15,708

Tripura

60

15,56,342

26

1,560

Uttarakhand

70

44,91,239

64

4,480

Uttar Pradesh

403

8,38,49,905

208

83,824

West Bengal

294

4,43,12,011

151

44,394

NCT of Delhi

70

40,65,698

58

4,060

Puducherry

30

4,71,707

16

480

Total

4,120

54,93,02,005

 

5,49,495

Source: Election Commission of India (2017); PRS.

The value of an MP’s vote correspondingly will change from 708 in 2017 to 700 in 2022. 

Value of one MP's vote =   Total value of all votes of MLAs      =   543231     =    700 
                                              Total number of elected MPs                 776

Note that the value of an MP’s vote is rounded off to the closest whole number. This brings the combined value of the votes of all MPs to 543,200 (700 x 776). 

What is the number of votes required to win?

The voting for the Presidential elections is done through the system of single transferable vote. In this system, electors rank the candidates in the order of their preference. The winning candidate must secure more than half of the total value of valid votes to win the election. This is known as the quota. 

Assuming that each elector casts his vote and that each vote is valid:

Quota = Total value of MP’s votes + Total value of MLA’s votes + 1                                                        
                                                        2

= 543200 + 543231 +1     =   1086431 +1     =    543,216 
                2                                   2

The anti-defection law which disallows MPs from crossing the party line does not apply to the Presidential election. This means that the MPs and MLAs can keep their ballot secret.  

The counting of votes takes place in rounds. In Round 1, only the first preference marked on each ballot is counted. If any of the candidates secures the quota at this stage, he or she is declared the winner. If no candidate secures the quota in the first round, then another round of counting takes place. In this round, the votes cast to the candidate who secures the least number of votes in Round 1 are transferred. This means that these votes are now added to the second preference candidate marked on each ballot. This process is repeated till only one candidate remains. Note that it is not compulsory for an elector to mark his preference for all candidates. If no second preference is marked, then the ballots are treated as exhausted ballots in Round 2 and are not counted further.  

The fifth Presidential election which elected Mr. VV Giri is the only instance when a candidate did not secure the quota in the first round.  The second preference votes were then evaluated and Mr. Giri secured 4,20,077 of the 8,36,337 votes and was declared the President.

The only President of India to win unopposed 
India’s sixth President, Mr. Neelam Sanjiva Reddy who served from 1977 to 1982 was the only President to be elected unopposed.  37 candidates had filed their nominations for the 1977 elections, however on scrutiny, the nomination papers of 36 candidates were rejected by the Returning Officer and Mr. Reddy was the only candidate standing.

India’s urban population has grown by 32% from 2001 to 2011 as compared to 18% growth in total population of the country.[1]  As per Census 2011, 31% of the country’s population (377 million people) live in cities, and contribute to 63% of the country’s GDP.[2]  The urban population is projected to grow up to 600 million by 2031.2  With increasing urban population, the need for providing better infrastructure and services in cities is increasing.[3]  The government has introduced several schemes to address different urban issues.  These include the Atal Mission for Rejuvenation and Urban Transformation (AMRUT), Smart Cities Mission, Heritage City Development and Augmentation Yojana (HRIDAY), Pradhan Mantri Awas Yojana – Housing for All (Urban) (PMAY-U), and Swachh Bharat Mission (Urban).

Last week the Ministry of Urban Development released the next batch of winners under the Smart Cities Mission.[4]  This takes the number of smart cities to 90.  The government has also announced a few policies and released data indicators to help with the implementation of the urban schemes.  In light of all this, we discuss how the new schemes are changing the mandate of urban development, the fiscal challenge of implementing such schemes, and the policies that are trying to address some of these challenges.

Urbanisation in India

The Jawaharlal Nehru National Urban Renewal Mission (JnNURM), launched in 2005, was one of the first urban development schemes implemented by the central government.  Under JnNURM, the central government specified certain mandatory and optional reforms for cities, and provided assistance to the state governments and cities that were linked to the implementation of these reforms.  JnNURM focused on improving urban infrastructure and service delivery, community participation, and accountability of city governments towards citizens.

In comparison, the new urban schemes move beyond the mandate that was set by JnNURM.  While AMRUT captures most of the objectives under JnNURM, the other schemes seek to address issues around sanitation (through Swachh Bharat), affordable housing (through PMAY-U), and technology innovation (through Smart Cities).  Further, the new schemes seek to decentralize the planning process to the city and state level, by giving them more decision making powers.2  So, while earlier, majority of the funding came from the central and state governments, now, a significant share of the funding needs to be raised by the cities themselves.

For example, under the Smart Cities Mission, the total cost of projects proposed by the 60 smart cities (winners from the earlier rounds) is Rs 1.3 lakh crore.[5]  About 42% of this amount will come from central and state funding towards the Mission, and the rest will be raised by the cities.[6]

The new schemes suggest that cities may raise these funds through: (i) their own resources such as collection of user fees, land monetization, property taxes, etc., (ii) finance mechanisms such as municipal bonds, (iii) leveraging borrowings from financial institutions, and (iv) the private sector through Public Private Partnerships (PPPs).[7]

In 2011, an Expert Committee on Indian Urban Infrastructure and Services (HPEC) had projected that creation of the required urban infrastructure would translate into an investment of Rs 97,500 crore to Rs 1,95,000 crore annually.[8]  The current urban schemes are investing around Rs 32,500 crore annually.

Financial capacity of cities

Currently, the different sources of revenue that municipal corporations have access to include: (i) tax revenue (property tax, tax on electricity, toll tax, entertainment tax), (ii) non-tax revenue (user charges, building permission fees, sale and hire charges), (iii) grants-in-aid (from state and central governments), and (iv) debt (loans borrowed from financial institutions and banks, and municipal bonds).

While cities are now required to raise more financing for urban projects, they do not have the required fiscal and technical capacity.8,[9]  The HPEC had observed that cities in India are among the weakest in the world, both in terms of capacity to raise resources and financial autonomy.  Even though cities have been getting higher allocations from the centre and states, their own tax bases are narrow.8  Further, several taxes that cities can levy are still mandated by the state government.  Because of their poor governance and financial situation, cities also find it difficult to access external financing.8,7

In order to help cities improve their finances, the government has introduced a few policies, and released a few indicators.  Some of these are discussed below:

Policy proposals and data indicators

Value Capture Financing (VCF):  The VCF policy framework was introduced by the Ministry of Urban Development in February 2017.[10]  VCF is a principle that states that people benefiting from public investments in infrastructure should pay for it.  Currently when governments invest in roads, airports and industries in an area, private property owners in that area benefit from it.  However, governments recover only a limited value from such investments, constraining their ability to make further public investments elsewhere.  VCF helps in capturing a part of the increment in the value of land due to such investments, and use it to fund new infrastructure projects.

The different instruments of VCF include: land value tax, fee for changing land use, betterment levy, development charges, transfer of development rights, and land pooling systems.10  For example, Karnataka uses certain value capture methods to fund its mass transit projects.  The Mumbai Metropolitan Region Development Authority (MMRDA), and City and Industrial Development Corporation Limited (CIDCO) have used betterment levy (tax levied on land that has gained in value because of public infrastructure investments) to finance infrastructure projects.

Municipal bonds:  Municipal bonds are bonds issued by urban local bodies (municipal corporations or entities owned by municipal bodies) to raise money for financing specific projects such as infrastructure projects.  The Securities and Exchange Board of India regulations (2015) regarding municipal bonds provide that, to issue such bonds, municipalities must: (i) not have negative net worth in any of the three preceding financial years, and (ii) not have defaulted in any loan repayments in the last one year.[11]  Therefore, a city’s performance in the bond market depends on its fiscal performance.  One of the ways to determine a city’s financial health is through credit ratings.

Credit rating of cities:  In September 2016, the Ministry of Urban Development started assigning cities with credit ratings.[12]  These credit ratings were assigned based on assets and liabilities of the cities, revenue streams, resources available for capital investments, accounting practices, and other governance practices.

Of the total 20 ratings ranging from AAA to D, BBB is the ‘Investment Grade’ rating and cities rated below BBB need to undertake necessary interventions to improve their ratings for obtaining positive response to the Municipal Bonds to be issued.  By March 2017, 94 cities were assigned credit ratings, 55 of which got ‘investment grade’ ratings.[13]

Credit ratings indicate what projects might be more lucrative for investments.  This, in turn, helps investors decide where to invest and determine the terms of such investments (based on the expected returns).

Earlier this month, the Pune Municipal Corporation raised Rs 200 crore through the sale of municipal bonds, to finance water supply projects under the Smart Cities Mission.[14]  The city had received an AA+ credit rating (second highest rating) in the recent credit rankings assigned by the central government.

Other than credit ratings, the Ministry of Urban Development has also come up with other data indicators around cities such as the Swachh Bharat rankings, and the City Liveability Index (measuring mobility, access to healthcare and education, employment opportunities, etc).  These rankings seek to foster a sense of competition across cities, and also help them map their performances year on year.

Some financing mechanisms, such as municipal bonds, have been around in India for the last two decades, but cities haven’t been able to make much use of them.  It remains to be seen whether the introduction of indicators such as credit ratings helps the municipal bond market take off.  While these mechanisms may improve the finances of cities, the question is would more funding solve the cities’ problems.  Or would it require municipal government to take a different approach to problem solving.

[1] Census of India, 2011.

[2] Mission Statement and Guidelines, Smart Cities, Ministry of Urban Development, June 2015, http://smartcities.gov.in/writereaddata/SmartCityGuidelines.pdf.

[3] Report on Indian Urban Infrastructure and Services, March, 2011, The High Powered Expert Committee for estimating the investment requirements for urban infrastructure services, http://icrier.org/pdf/FinalReport-hpec.pdf.

[4] “30 more smart cities announced; takes the total to 90 so far”, Press Information Bureau, Ministry of Urban Development, June 23, 2017.

[5]  Smart Cities Mission, Ministry of Urban Development, last accessed on June 30, 2017, http://smartcities.gov.in/content/.

[6] Smart City Plans, Last accessed in June 2017.

[7] “Financing of Smart Cities”, Smart Cities Mission, Ministry of Urban Development, http://smartcities.gov.in/upload/uploadfiles/files/Financing%20of%20Smart%20Cities.pdf.

[8] “Report on Indian Urban Infrastructure and Services”, March, 2011, The High Powered Expert Committee for estimating the investment requirements for urban infrastructure services, http://icrier.org/pdf/FinalReport-hpec.pdf.

[9] Fourteenth Finance Commission, Ministry of Finance, February 2015, http://finmin.nic.in/14fincomm/14fcrengVol1.pdf.

[10] Value Capture Finance Policy Framework, Ministry of Urban Development, February 2017, http://smartcities.gov.in/upload/5901982d9e461VCFPolicyFrameworkFINAL.pdf.

[11] Securities and Exchange Board of India (Issue and Listing of Debt Securities by Municipalities) Regulations, 2015, Securities and Exchange Board of India, July 15, 2015, http://www.sebi.gov.in/sebi_data/attachdocs/1436964571729.pdf.

[12] “Credit rating of cities under urban reforms begins”, Press Information Bureau, Ministry of Urban Development, September 6, 2016.

[13] “Credit Rating of Urban Local Bodies gain Momentum”, Press Information Bureau, Ministry of Urban Development, March 26, 2017.

[14] “Pune civic body raises Rs200 crore via municipal bonds”, LiveMint, June 19, 2017, http://www.livemint.com/Money/JOOzaSTKnC6k1EZGeFh8LJ/Pune-civic-body-raises-Rs200-crore-via-municipal-bonds.html.