Mr. Ramnath Kovind completes his tenure as President in July.  With the Election Commission of India expected to notify the election dates this week, we look at how India will elect its next President.  

As the Head of the State, the President is a key part of Parliament.  The President calls the two Houses of Parliament into session on the advice of the Council of Ministers.  A Bill passed by the Lok Sabha and Rajya Sabha does not become a law unless assented to by the President.  Further, when Parliament is not in session, the President holds the power to sign a law with immediate effect through an Ordinance.

Who elects the President?

The manner of election of the President is provided in Article 55 of the Constitution.  Members of Parliament and Members of Legislative Assemblies (MPs and MLAs) including elected representatives from the Union Territories (UTs) of Delhi and Puducherry form the electoral college, which elects the President.  At least 50 elected representatives must propose a candidate, who must then be seconded by 50 other electors to run for the President's office.  Members of Legislative Councils and the 12 nominated members of Rajya Sabha do not participate in the voting process.

The history behind having proposers and seconders 
The requirement of having a certain number of electors propose a candidate was introduced after the experience of the first five Presidential elections.  It was common then for several candidates to put themselves up for election when they did not have a remote chance of getting elected.  In the 1967 Presidential elections, 17 candidates contested, but nine of them did not win a single vote.  This repeated again in the 1969 elections, when out of 15 candidates, five did not secure any votes.

To discourage the practice, candidates had to secure at least 10 proposers and seconders each to contest the elections from the 1974 election onwards.  A compulsory security deposit of Rs 2,500 was also introduced.  The changes were brought in through an amendment to the Presidential and Vice-Presidential Act, 1952

In 1997, the Act was further amended to increase the security deposit to Rs 15,000 and the minimum number of proposers and seconders to 50 each.


How are the votes calculated?

The Presidential election uses a special voting to tally the votes.  A different voting weightage is assigned to an MP and an MLA.  The value of each MLA's vote is determined based on the population of their state and the number of MLAs.  For instance, an MLA from UP has a value of 208 while an MLA from Sikkim has 7 (see Table 1).  Due to a Constitutional Amendment passed in 2002, the population of the state as per the 1971 census is taken for the calculation.

The value of an MP's vote is the sum of all votes of MLAs across the country divided by the number of elected MPs.  

How will the numbers look in 2022?

In the 2017 Presidential elections, electors from 31 states and the UTs of Delhi and Puducherry participated. However, in 2019, with the Jammu and Kashmir (J&K) Reorganization Act, the number of states were reduced to 30. The J&K Assembly was dissolved as per the Act and a new legislature for the UT of J&K is yet to be reconstituted. UTs with legislatures were not originally part of the electoral college for the election of the President. The Constitution was amended in 1992 to specifically include the UTs of Delhi and Puducherry. Note that for MLAs from J&K to participate in future Presidential elections, a similar Constitutional amendment would be required to be passed by Parliament.

Based on the assumption that J&K is not included in the 2022 Presidential election, the total number of votes of MLAs in 2022 elections will have to be adjusted.  The 87 Jammu and Kashmir MLAs must be removed from the total number of MLAs of 4,120.  Jammu and Kashmir’s contributing vote share of 6,264 must also be reduced from the total vote share of 549,495.  Adjusting for these changes, 4,033 MLAs will participate in the 2022 elections and the combined vote share of all MLAs will add up to 543,231.

Table 1: The value of votes of elected MLAs of different states at the 2017 Presidential Election

Name of State

Number of Assembly seats

Population (1971 Census)

Value of vote of each MLA

Total value of votes for the state (B x D)

A

B

C

D

E

Andhra Pradesh

175

2,78,00,586

159

27,825

Arunachal Pradesh

60

4,67,511

8

480

Assam

126

1,46,25,152

116

14,616

Bihar

243

4,21,26,236

173

42,039

Chhattisgarh

90

1,16,37,494

129

11,610

Goa

40

7,95,120

20

800

Gujarat

182

2,66,97,475

147

26,754

Haryana

90

1,00,36,808

112

10,080

Himachal Pradesh

68

34,60,434

51

3,468

Jammu and Kashmir

87

63,00,000

72

6,264

Jharkhand

81

1,42,27,133

176

14,256

Karnataka

224

2,92,99,014

131

29,344

Kerala

140

2,13,47,375

152

21,280

Madhya Pradesh

230

3,00,16,625

131

30,130

Maharashtra

288

5,04,12,235

175

50,400

Manipur

60

10,72,753

18

1,080

Meghalaya

60

10,11,699

17

1,020

Mizoram

40

3,32,390

8

320

Nagaland

60

5,16,449

9

540

Odisha

147

2,19,44,615

149

21,903

Punjab

117

1,35,51,060

116

13,572

Rajasthan

200

2,57,65,806

129

25,800

Sikkim

32

2,09,843

7

224

Tamil Nadu

234

4,11,99,168

176

41,184

Telangana

119

1,57,02,122

132

15,708

Tripura

60

15,56,342

26

1,560

Uttarakhand

70

44,91,239

64

4,480

Uttar Pradesh

403

8,38,49,905

208

83,824

West Bengal

294

4,43,12,011

151

44,394

NCT of Delhi

70

40,65,698

58

4,060

Puducherry

30

4,71,707

16

480

Total

4,120

54,93,02,005

 

5,49,495

Source: Election Commission of India (2017); PRS.

The value of an MP’s vote correspondingly will change from 708 in 2017 to 700 in 2022. 

Value of one MP's vote =   Total value of all votes of MLAs      =   543231     =    700 
                                              Total number of elected MPs                 776

Note that the value of an MP’s vote is rounded off to the closest whole number. This brings the combined value of the votes of all MPs to 543,200 (700 x 776). 

What is the number of votes required to win?

The voting for the Presidential elections is done through the system of single transferable vote. In this system, electors rank the candidates in the order of their preference. The winning candidate must secure more than half of the total value of valid votes to win the election. This is known as the quota. 

Assuming that each elector casts his vote and that each vote is valid:

Quota = Total value of MP’s votes + Total value of MLA’s votes + 1                                                        
                                                        2

= 543200 + 543231 +1     =   1086431 +1     =    543,216 
                2                                   2

The anti-defection law which disallows MPs from crossing the party line does not apply to the Presidential election. This means that the MPs and MLAs can keep their ballot secret.  

The counting of votes takes place in rounds. In Round 1, only the first preference marked on each ballot is counted. If any of the candidates secures the quota at this stage, he or she is declared the winner. If no candidate secures the quota in the first round, then another round of counting takes place. In this round, the votes cast to the candidate who secures the least number of votes in Round 1 are transferred. This means that these votes are now added to the second preference candidate marked on each ballot. This process is repeated till only one candidate remains. Note that it is not compulsory for an elector to mark his preference for all candidates. If no second preference is marked, then the ballots are treated as exhausted ballots in Round 2 and are not counted further.  

The fifth Presidential election which elected Mr. VV Giri is the only instance when a candidate did not secure the quota in the first round.  The second preference votes were then evaluated and Mr. Giri secured 4,20,077 of the 8,36,337 votes and was declared the President.

The only President of India to win unopposed 
India’s sixth President, Mr. Neelam Sanjiva Reddy who served from 1977 to 1982 was the only President to be elected unopposed.  37 candidates had filed their nominations for the 1977 elections, however on scrutiny, the nomination papers of 36 candidates were rejected by the Returning Officer and Mr. Reddy was the only candidate standing.

The Insolvency and Bankruptcy Code, 2016 is listed for passage in Rajya Sabha today.  Last week, Lok Sabha passed the Code with changes recommended by the Joint Parliamentary Committee that examined the Code.[1],[2]  We present answers to some of the frequently asked questions in relation to the Insolvency and Bankruptcy Code, 2016. Why do we need a new law?Time resolve insolvency1 As of 2015, insolvency resolution in India took 4.3 years on an average.  This is higher when compared to other countries such as United Kingdom (1 year) and United States of America (1.5 years).  Figure 1 provides a comparison of the time to resolve insolvency for various countries.  These delays are caused due to time taken to resolve cases in courts, and confusion due to a lack of clarity about the current bankruptcy framework. What does the current Code aim to do? The 2016 Code applies to companies and individuals.  It provides for a time-bound process to resolve insolvency.  When a default in repayment occurs, creditors gain control over debtor’s assets and must take decisions to resolve insolvency within a 180-day period.  To ensure an uninterrupted resolution process, the Code also provides immunity to debtors from resolution claims of creditors during this period. The Code also consolidates provisions of the current legislative framework to form a common forum for debtors and creditors of all classes to resolve insolvency. Who facilitates the insolvency resolution under the Code? The Code creates various institutions to facilitate resolution of insolvency.  These are as follows:

  • Insolvency Professionals: A specialised cadre of licensed professionals is proposed to be created. These professionals will administer the resolution process, manage the assets of the debtor, and provide information for creditors to assist them in decision making.
  • Insolvency Professional Agencies: The insolvency professionals will be registered with insolvency professional agencies. The agencies conduct examinations to certify the insolvency professionals and enforce a code of conduct for their performance.
  • Information Utilities: Creditors will report financial information of the debt owed to them by the debtor. Such information will include records of debt, liabilities and defaults.
  • Adjudicating authorities: The proceedings of the resolution process will be adjudicated by the National Companies Law Tribunal (NCLT), for companies; and the Debt Recovery Tribunal (DRT), for individuals. The duties of the authorities will include approval to initiate the resolution process, appoint the insolvency professional, and approve the final decision of creditors.
  • Insolvency and Bankruptcy Board: The Board will regulate insolvency professionals, insolvency professional agencies and information utilities set up under the Code.  The Board will consist of representatives of Reserve Bank of India, and the Ministries of Finance, Corporate Affairs and Law.

What is the procedure to resolve insolvency in the Code? The Code proposes the following steps to resolve insolvency:

  • Initiation: When a default occurs, the resolution process may be initiated by the debtor or creditor. The insolvency professional administers the process.  The professional provides financial information of the debtor from the information utilities to the creditor and manage the debtor’s assets.  This process lasts for 180 days and any legal action against the debtor is prohibited during this period.
  • Decision to resolve insolvency: A committee consisting of the financial creditors who lent money to the debtor will be formed by the insolvency professional. The creditors committee will take a decision regarding the future of the outstanding debt owed to them.  They may choose to revive the debt owed to them by changing the repayment schedule, or sell (liquidate) the assets of the debtor to repay the debts owed to them.  If a decision is not taken in 180 days, the debtor’s assets go into liquidation.
  • Liquidation: If the debtor goes into liquidation, an insolvency professional administers the liquidation process. Proceeds from the sale of the debtor’s assets are distributed in the following order of precedence: i) insolvency resolution costs, including the remuneration to the insolvency professional, ii) secured creditors, whose loans are backed by collateral, dues to workers, other employees, iii) unsecured creditors, iv) dues to government, v) priority shareholders and vi) equity shareholders.

What are some issues in the Code that require consideration?

  • The Bankruptcy Board (regulator) will regulate insolvency professional agencies (IPAs), which will further regulate insolvency professionals (IPs).  The rationale behind multiple IPAs overseeing the functioning of their member IPs, instead of a single regulator is unclear. The presence of multiple IPAs  operating simultaneously could enable competition in the sector. However, this may also lead to a conflict of interest between the regulatory and competitive goals of the IPAs.  This structure of regulation varies from the current practice where the regulator directly regulates its registered professionals.  For example, the Institute of Chartered Accountants of India (which regulates chartered accountants) is directly responsible for regulating its registered members.
  • The Code provides an order of priority to distribute assets during liquidation. It is unclear why: (i) secured creditors will receive their entire outstanding amount, rather than up to their collateral value, (ii) unsecured creditors have priority over trade creditors, and (iii) government dues will be repaid after unsecured creditors.
  • The smooth functioning of the Code depends on the functioning of new entities such as insolvency professionals, insolvency professional agencies and information utilities.  These entities will have to evolve over time for the proper functioning of the system.  In addition, the NCLT, which will adjudicate corporate insolvency has not been constituted as yet, and the DRTs are overloaded with pending cases.

 


 

  1. The Insolvency and Bankruptcy Code, 2016, http://www.prsindia.org/administrator/uploads/media/Bankruptcy/Bankruptcy%20Code%20as%20passed%20by%20LS.pdf.
  2. Report of the Joint Committee on the Insolvency and Bankruptcy Code, 2015, April 28, 2016, http://164.100.47.134/lsscommittee/Joint%20Committee%20on%20Insolvency%20and%20Bankruptcy%20Code,%202015/16_Joint_Committee_o n_Insolvency_and_Bankruptcy_Code_2015_1.pdf

A version of this blog appeared in the Business Standard on May 7, 2016.