Applications for LAMP Fellowship 2025-26 are now open. Apply here. The last date for submitting applications is December 21, 2024
Mr. Ramnath Kovind completes his tenure as President in July. With the Election Commission of India expected to notify the election dates this week, we look at how India will elect its next President.
As the Head of the State, the President is a key part of Parliament. The President calls the two Houses of Parliament into session on the advice of the Council of Ministers. A Bill passed by the Lok Sabha and Rajya Sabha does not become a law unless assented to by the President. Further, when Parliament is not in session, the President holds the power to sign a law with immediate effect through an Ordinance.
Who elects the President?
The manner of election of the President is provided in Article 55 of the Constitution. Members of Parliament and Members of Legislative Assemblies (MPs and MLAs) including elected representatives from the Union Territories (UTs) of Delhi and Puducherry form the electoral college, which elects the President. At least 50 elected representatives must propose a candidate, who must then be seconded by 50 other electors to run for the President's office. Members of Legislative Councils and the 12 nominated members of Rajya Sabha do not participate in the voting process.
|
The history behind having proposers and seconders To discourage the practice, candidates had to secure at least 10 proposers and seconders each to contest the elections from the 1974 election onwards. A compulsory security deposit of Rs 2,500 was also introduced. The changes were brought in through an amendment to the Presidential and Vice-Presidential Act, 1952. In 1997, the Act was further amended to increase the security deposit to Rs 15,000 and the minimum number of proposers and seconders to 50 each. |
How are the votes calculated?
The Presidential election uses a special voting to tally the votes. A different voting weightage is assigned to an MP and an MLA. The value of each MLA's vote is determined based on the population of their state and the number of MLAs. For instance, an MLA from UP has a value of 208 while an MLA from Sikkim has 7 (see Table 1). Due to a Constitutional Amendment passed in 2002, the population of the state as per the 1971 census is taken for the calculation.
The value of an MP's vote is the sum of all votes of MLAs across the country divided by the number of elected MPs.
How will the numbers look in 2022?
In the 2017 Presidential elections, electors from 31 states and the UTs of Delhi and Puducherry participated. However, in 2019, with the Jammu and Kashmir (J&K) Reorganization Act, the number of states were reduced to 30. The J&K Assembly was dissolved as per the Act and a new legislature for the UT of J&K is yet to be reconstituted. UTs with legislatures were not originally part of the electoral college for the election of the President. The Constitution was amended in 1992 to specifically include the UTs of Delhi and Puducherry. Note that for MLAs from J&K to participate in future Presidential elections, a similar Constitutional amendment would be required to be passed by Parliament.
Based on the assumption that J&K is not included in the 2022 Presidential election, the total number of votes of MLAs in 2022 elections will have to be adjusted. The 87 Jammu and Kashmir MLAs must be removed from the total number of MLAs of 4,120. Jammu and Kashmir’s contributing vote share of 6,264 must also be reduced from the total vote share of 549,495. Adjusting for these changes, 4,033 MLAs will participate in the 2022 elections and the combined vote share of all MLAs will add up to 543,231.
Table 1: The value of votes of elected MLAs of different states at the 2017 Presidential Election
|
Name of State |
Number of Assembly seats |
Population (1971 Census) |
Value of vote of each MLA |
Total value of votes for the state (B x D) |
|
A |
B |
C |
D |
E |
|
Andhra Pradesh |
175 |
2,78,00,586 |
159 |
27,825 |
|
Arunachal Pradesh |
60 |
4,67,511 |
8 |
480 |
|
Assam |
126 |
1,46,25,152 |
116 |
14,616 |
|
Bihar |
243 |
4,21,26,236 |
173 |
42,039 |
|
Chhattisgarh |
90 |
1,16,37,494 |
129 |
11,610 |
|
Goa |
40 |
7,95,120 |
20 |
800 |
|
Gujarat |
182 |
2,66,97,475 |
147 |
26,754 |
|
Haryana |
90 |
1,00,36,808 |
112 |
10,080 |
|
Himachal Pradesh |
68 |
34,60,434 |
51 |
3,468 |
|
Jammu and Kashmir |
87 |
63,00,000 |
72 |
6,264 |
|
Jharkhand |
81 |
1,42,27,133 |
176 |
14,256 |
|
Karnataka |
224 |
2,92,99,014 |
131 |
29,344 |
|
Kerala |
140 |
2,13,47,375 |
152 |
21,280 |
|
Madhya Pradesh |
230 |
3,00,16,625 |
131 |
30,130 |
|
Maharashtra |
288 |
5,04,12,235 |
175 |
50,400 |
|
Manipur |
60 |
10,72,753 |
18 |
1,080 |
|
Meghalaya |
60 |
10,11,699 |
17 |
1,020 |
|
Mizoram |
40 |
3,32,390 |
8 |
320 |
|
Nagaland |
60 |
5,16,449 |
9 |
540 |
|
Odisha |
147 |
2,19,44,615 |
149 |
21,903 |
|
Punjab |
117 |
1,35,51,060 |
116 |
13,572 |
|
Rajasthan |
200 |
2,57,65,806 |
129 |
25,800 |
|
Sikkim |
32 |
2,09,843 |
7 |
224 |
|
Tamil Nadu |
234 |
4,11,99,168 |
176 |
41,184 |
|
Telangana |
119 |
1,57,02,122 |
132 |
15,708 |
|
Tripura |
60 |
15,56,342 |
26 |
1,560 |
|
Uttarakhand |
70 |
44,91,239 |
64 |
4,480 |
|
Uttar Pradesh |
403 |
8,38,49,905 |
208 |
83,824 |
|
West Bengal |
294 |
4,43,12,011 |
151 |
44,394 |
|
NCT of Delhi |
70 |
40,65,698 |
58 |
4,060 |
|
Puducherry |
30 |
4,71,707 |
16 |
480 |
|
Total |
4,120 |
54,93,02,005 |
|
5,49,495 |
Source: Election Commission of India (2017); PRS.
The value of an MP’s vote correspondingly will change from 708 in 2017 to 700 in 2022.
Value of one MP's vote = Total value of all votes of MLAs = 543231 = 700
Total number of elected MPs 776
Note that the value of an MP’s vote is rounded off to the closest whole number. This brings the combined value of the votes of all MPs to 543,200 (700 x 776).
What is the number of votes required to win?
The voting for the Presidential elections is done through the system of single transferable vote. In this system, electors rank the candidates in the order of their preference. The winning candidate must secure more than half of the total value of valid votes to win the election. This is known as the quota.
Assuming that each elector casts his vote and that each vote is valid:
Quota = Total value of MP’s votes + Total value of MLA’s votes + 1
2
= 543200 + 543231 +1 = 1086431 +1 = 543,216
2 2
The anti-defection law which disallows MPs from crossing the party line does not apply to the Presidential election. This means that the MPs and MLAs can keep their ballot secret.
The counting of votes takes place in rounds. In Round 1, only the first preference marked on each ballot is counted. If any of the candidates secures the quota at this stage, he or she is declared the winner. If no candidate secures the quota in the first round, then another round of counting takes place. In this round, the votes cast to the candidate who secures the least number of votes in Round 1 are transferred. This means that these votes are now added to the second preference candidate marked on each ballot. This process is repeated till only one candidate remains. Note that it is not compulsory for an elector to mark his preference for all candidates. If no second preference is marked, then the ballots are treated as exhausted ballots in Round 2 and are not counted further.
The fifth Presidential election which elected Mr. VV Giri is the only instance when a candidate did not secure the quota in the first round. The second preference votes were then evaluated and Mr. Giri secured 4,20,077 of the 8,36,337 votes and was declared the President.
|
The only President of India to win unopposed |
Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts. It had first recommended these names earlier this year and in August last year, but these appointments were not made. The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts). Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases. As of today, more than four crore cases are pending across all courts in India. In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.
High vacancy of judges across courts
Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges. Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually. However, vacancies persist due to insufficient appointments (see Figures 1 and 2). Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts).
|
Figure 1: Vacancy of judges in High Courts |
Figure 2: Vacancy of judges in subordinate courts |
|
|
|
|
Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS. |
|
As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34). Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098). Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges. In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3). The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled.
|
Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021)
|
|
Source: Vacancy Statement, Department of Justice; PRS. |
Appointments of High Court judges are guided by a memorandum of procedure. As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs. However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts. Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court. No timeline is prescribed for this stage of the appointment process. In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.
As of today, over 3.6 crore cases are pending before subordinate courts in India. As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts. Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4). Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.
For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.
Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)
|
|
|
Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS. |
How many judges do we need?
The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary. Lack of adequate number of judges means a greater workload per judge. Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts. Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1).
Table 1: Methods recommended for calculating the required number of judges for subordinate courts
|
Method of calculation |
Recommendation and its status |
|
Judge-to-population ratio: optimum number of judges per million population |
The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people. This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002). For 2020, the judge-to-population ratio was 21 judges per million population. Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts. |
|
Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge |
The Law Commission of India (2014) proposed this method. It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions. |
|
Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions |
The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method. It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts. In 2017, the Supreme Court accepted this model. |
|
Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study |
Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts. It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court. The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi. |
Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.
