Applications for LAMP Fellowship 2025-26 are now open. Apply here. The last date for submitting applications is December 21, 2024
Mr. Ramnath Kovind completes his tenure as President in July. With the Election Commission of India expected to notify the election dates this week, we look at how India will elect its next President.
As the Head of the State, the President is a key part of Parliament. The President calls the two Houses of Parliament into session on the advice of the Council of Ministers. A Bill passed by the Lok Sabha and Rajya Sabha does not become a law unless assented to by the President. Further, when Parliament is not in session, the President holds the power to sign a law with immediate effect through an Ordinance.
Who elects the President?
The manner of election of the President is provided in Article 55 of the Constitution. Members of Parliament and Members of Legislative Assemblies (MPs and MLAs) including elected representatives from the Union Territories (UTs) of Delhi and Puducherry form the electoral college, which elects the President. At least 50 elected representatives must propose a candidate, who must then be seconded by 50 other electors to run for the President's office. Members of Legislative Councils and the 12 nominated members of Rajya Sabha do not participate in the voting process.
|
The history behind having proposers and seconders To discourage the practice, candidates had to secure at least 10 proposers and seconders each to contest the elections from the 1974 election onwards. A compulsory security deposit of Rs 2,500 was also introduced. The changes were brought in through an amendment to the Presidential and Vice-Presidential Act, 1952. In 1997, the Act was further amended to increase the security deposit to Rs 15,000 and the minimum number of proposers and seconders to 50 each. |
How are the votes calculated?
The Presidential election uses a special voting to tally the votes. A different voting weightage is assigned to an MP and an MLA. The value of each MLA's vote is determined based on the population of their state and the number of MLAs. For instance, an MLA from UP has a value of 208 while an MLA from Sikkim has 7 (see Table 1). Due to a Constitutional Amendment passed in 2002, the population of the state as per the 1971 census is taken for the calculation.
The value of an MP's vote is the sum of all votes of MLAs across the country divided by the number of elected MPs.
How will the numbers look in 2022?
In the 2017 Presidential elections, electors from 31 states and the UTs of Delhi and Puducherry participated. However, in 2019, with the Jammu and Kashmir (J&K) Reorganization Act, the number of states were reduced to 30. The J&K Assembly was dissolved as per the Act and a new legislature for the UT of J&K is yet to be reconstituted. UTs with legislatures were not originally part of the electoral college for the election of the President. The Constitution was amended in 1992 to specifically include the UTs of Delhi and Puducherry. Note that for MLAs from J&K to participate in future Presidential elections, a similar Constitutional amendment would be required to be passed by Parliament.
Based on the assumption that J&K is not included in the 2022 Presidential election, the total number of votes of MLAs in 2022 elections will have to be adjusted. The 87 Jammu and Kashmir MLAs must be removed from the total number of MLAs of 4,120. Jammu and Kashmir’s contributing vote share of 6,264 must also be reduced from the total vote share of 549,495. Adjusting for these changes, 4,033 MLAs will participate in the 2022 elections and the combined vote share of all MLAs will add up to 543,231.
Table 1: The value of votes of elected MLAs of different states at the 2017 Presidential Election
|
Name of State |
Number of Assembly seats |
Population (1971 Census) |
Value of vote of each MLA |
Total value of votes for the state (B x D) |
|
A |
B |
C |
D |
E |
|
Andhra Pradesh |
175 |
2,78,00,586 |
159 |
27,825 |
|
Arunachal Pradesh |
60 |
4,67,511 |
8 |
480 |
|
Assam |
126 |
1,46,25,152 |
116 |
14,616 |
|
Bihar |
243 |
4,21,26,236 |
173 |
42,039 |
|
Chhattisgarh |
90 |
1,16,37,494 |
129 |
11,610 |
|
Goa |
40 |
7,95,120 |
20 |
800 |
|
Gujarat |
182 |
2,66,97,475 |
147 |
26,754 |
|
Haryana |
90 |
1,00,36,808 |
112 |
10,080 |
|
Himachal Pradesh |
68 |
34,60,434 |
51 |
3,468 |
|
Jammu and Kashmir |
87 |
63,00,000 |
72 |
6,264 |
|
Jharkhand |
81 |
1,42,27,133 |
176 |
14,256 |
|
Karnataka |
224 |
2,92,99,014 |
131 |
29,344 |
|
Kerala |
140 |
2,13,47,375 |
152 |
21,280 |
|
Madhya Pradesh |
230 |
3,00,16,625 |
131 |
30,130 |
|
Maharashtra |
288 |
5,04,12,235 |
175 |
50,400 |
|
Manipur |
60 |
10,72,753 |
18 |
1,080 |
|
Meghalaya |
60 |
10,11,699 |
17 |
1,020 |
|
Mizoram |
40 |
3,32,390 |
8 |
320 |
|
Nagaland |
60 |
5,16,449 |
9 |
540 |
|
Odisha |
147 |
2,19,44,615 |
149 |
21,903 |
|
Punjab |
117 |
1,35,51,060 |
116 |
13,572 |
|
Rajasthan |
200 |
2,57,65,806 |
129 |
25,800 |
|
Sikkim |
32 |
2,09,843 |
7 |
224 |
|
Tamil Nadu |
234 |
4,11,99,168 |
176 |
41,184 |
|
Telangana |
119 |
1,57,02,122 |
132 |
15,708 |
|
Tripura |
60 |
15,56,342 |
26 |
1,560 |
|
Uttarakhand |
70 |
44,91,239 |
64 |
4,480 |
|
Uttar Pradesh |
403 |
8,38,49,905 |
208 |
83,824 |
|
West Bengal |
294 |
4,43,12,011 |
151 |
44,394 |
|
NCT of Delhi |
70 |
40,65,698 |
58 |
4,060 |
|
Puducherry |
30 |
4,71,707 |
16 |
480 |
|
Total |
4,120 |
54,93,02,005 |
|
5,49,495 |
Source: Election Commission of India (2017); PRS.
The value of an MP’s vote correspondingly will change from 708 in 2017 to 700 in 2022.
Value of one MP's vote = Total value of all votes of MLAs = 543231 = 700
Total number of elected MPs 776
Note that the value of an MP’s vote is rounded off to the closest whole number. This brings the combined value of the votes of all MPs to 543,200 (700 x 776).
What is the number of votes required to win?
The voting for the Presidential elections is done through the system of single transferable vote. In this system, electors rank the candidates in the order of their preference. The winning candidate must secure more than half of the total value of valid votes to win the election. This is known as the quota.
Assuming that each elector casts his vote and that each vote is valid:
Quota = Total value of MP’s votes + Total value of MLA’s votes + 1
2
= 543200 + 543231 +1 = 1086431 +1 = 543,216
2 2
The anti-defection law which disallows MPs from crossing the party line does not apply to the Presidential election. This means that the MPs and MLAs can keep their ballot secret.
The counting of votes takes place in rounds. In Round 1, only the first preference marked on each ballot is counted. If any of the candidates secures the quota at this stage, he or she is declared the winner. If no candidate secures the quota in the first round, then another round of counting takes place. In this round, the votes cast to the candidate who secures the least number of votes in Round 1 are transferred. This means that these votes are now added to the second preference candidate marked on each ballot. This process is repeated till only one candidate remains. Note that it is not compulsory for an elector to mark his preference for all candidates. If no second preference is marked, then the ballots are treated as exhausted ballots in Round 2 and are not counted further.
The fifth Presidential election which elected Mr. VV Giri is the only instance when a candidate did not secure the quota in the first round. The second preference votes were then evaluated and Mr. Giri secured 4,20,077 of the 8,36,337 votes and was declared the President.
|
The only President of India to win unopposed |
The Monetary Policy Committee (MPC) has decided to conduct an off-cycle meeting today to discuss the failure to meet the inflation target under Section 45ZN of the Reserve Bank of India Act, 1934. As per the Reserve Bank of India Act (RBI), 1934, MPC is required to meet at least four times each year, to discuss the macroeconomic issues in the country, and take policy decisions to address those. This is the second time MPC has conducted an off-cycle meeting in 2022-23. The meeting is scheduled in light of inflation being consistently high for nine consecutive months.
In this blog, we discuss what the inflation targeting framework is, examine retail and wholesale prices, and the divergence between them.
What is the inflation targeting framework, and what happens if inflation is persistently high?
In 2016, Parliament amended the RBI Act, 1934 to change the monetary policy, and introduce an inflation targeting framework. This framework prioritises price stability to achieve sustainable GDP growth. Price stability allows investors to confidently invest their money for productive activities, without worrying about it losing value. Price stability also maintains the purchasing power of consumers, i.e., the ability to purchase a good (or service) with a given amount of money.
As per the new framework, the central government, in consultation with RBI sets: (i) an inflation target, and (ii) an upper and lower tolerance level for retail inflation. The target has been set at 4%, with an upper tolerance limit of 6% and a lower tolerance limit of 2%. The upper and lower limits indicate that although it is desirable for inflation to be close to 4%, deviation between these limits is acceptable. The target and bands are revised every five years. In March 2021, the existing targets were carried forward.
Retail inflation has been above 6% for the past nine months, and it has been above 4% from October 2019 onwards (See Figure 1).
Figure 1: Consumer price index (year-on-year; in percentage)
Sources: Database on Indian Economy, Reserve Bank of India; PRS.
If inflation is above or below the prescribed limits for three quarters, RBI must submit a report to the central government explaining why prices have been rising (or falling) persistently, what will be done to correct that, and an estimate as to when the target will be achieved.
The MPC uses tools such as interest rates to control the level of inflation in the economy. One such rate is the policy repo rate, which is the rate at which RBI lends money to banks. An increase in the policy repo rate makes borrowing money more costly, and hence is expected to control inflation by reducing the money supply. MPC increased this rate from 4% in April 2022 to 4.4% in May 2022, to 4.9% in June 2022, to 5.4% in August 2022, and to 5.9% in September 2022.
Breaking down the Consumer Price Index and the Wholesale Price Index
Consumer Price Index (CPI) measures the general prices of goods and services such as food, clothing, and fuel over time. Retail inflation is calculated as the change in the CPI over a period of time. Goods and services such as petrol, food products, health, and education are considered for its calculation, which are assigned different weights (See Table 1). Between February 2022 and August 2022, the average annual inflation was 6.9%. The rise in prices of subcomponents of the CPI during this period is indicated in Table 2.
|
Table 1: Assigned weights for the calculation of CPI
Sources: MOSPI; PRS. |
Table 2: Average inflation of some CPI components
Sources: Database on Indian Economy, RBI; PRS. |
CPI is not the only index that measures inflation in an economy. The Wholesale Price Index (WPI) measures the wholesale prices of goods. A change in wholesale prices reflects wholesale inflation. Table 3 indicates the weights assigned to goods for calculating the WPI. Manufactured goods include metals, chemicals, food products, and textiles.
|
Primary articles (23%) include food articles, and crude petroleum and natural gas. Fuel and power (12%) include mineral oils, electricity, and coal. WPI has remained above 10% from April 2021 onwards. It reached an all-time high of 17% in May 2022. This was driven by the inflation in metals, kerosene and petroleum coke, fruits and vegetables, and palm oil. |
Table 3:Assigned weights for the
Sources: Ministry of Commerce and Industry; PRS. |
Why has WPI inflation been consistently above CPI inflation?
Movements in the WPI have an impact on the CPI. For almost a year and half, CPI inflation has remained below WPI inflation. However, as per the design of the indices, it is expected that CPI would remain above WPI, and that any increase in WPI would reflect in the CPI after a time lag. This is because retail prices include taxes (as a percentage of price), while wholesale prices do not. Additionally, some of the goods in WPI act as inputs in the goods considered in CPI. An increase in input prices would lead to higher retail prices after a time lag.
We discuss possible reasons for why CPI has remained below WPI for a year and a half.
Figure 2: Consumer Price Index and Wholesale Price Index
Sources: Database on Indian Economy, Reserve Bank of India; PRS.
Composition of indices
As indicated in Table 2 and 3, the composition of the two indices varies. For instance, prices of manufacture of basic metals, chemicals, and machinery grew at an average rate of 13% between February 2021 and September 2022. They contribute 7% to the WPI. These are input goods for producing final goods and services such as automobiles, which are included in the CPI. The rise in prices of transport vehicles, communication devices, fuel for transport, and housing (CPI components) rose by 6% during this period.
The Ministry of Finance has observed that wholesale prices did not feed into retail prices (from March 2021 onwards) as wholesalers absorbed the rising input costs and did not pass them on to retailers. In August 2022, it noted that as retail prices are rising now, the pass-through may occur.
