Mr. Ramnath Kovind completes his tenure as President in July.  With the Election Commission of India expected to notify the election dates this week, we look at how India will elect its next President.  

As the Head of the State, the President is a key part of Parliament.  The President calls the two Houses of Parliament into session on the advice of the Council of Ministers.  A Bill passed by the Lok Sabha and Rajya Sabha does not become a law unless assented to by the President.  Further, when Parliament is not in session, the President holds the power to sign a law with immediate effect through an Ordinance.

Who elects the President?

The manner of election of the President is provided in Article 55 of the Constitution.  Members of Parliament and Members of Legislative Assemblies (MPs and MLAs) including elected representatives from the Union Territories (UTs) of Delhi and Puducherry form the electoral college, which elects the President.  At least 50 elected representatives must propose a candidate, who must then be seconded by 50 other electors to run for the President's office.  Members of Legislative Councils and the 12 nominated members of Rajya Sabha do not participate in the voting process.

The history behind having proposers and seconders 
The requirement of having a certain number of electors propose a candidate was introduced after the experience of the first five Presidential elections.  It was common then for several candidates to put themselves up for election when they did not have a remote chance of getting elected.  In the 1967 Presidential elections, 17 candidates contested, but nine of them did not win a single vote.  This repeated again in the 1969 elections, when out of 15 candidates, five did not secure any votes.

To discourage the practice, candidates had to secure at least 10 proposers and seconders each to contest the elections from the 1974 election onwards.  A compulsory security deposit of Rs 2,500 was also introduced.  The changes were brought in through an amendment to the Presidential and Vice-Presidential Act, 1952

In 1997, the Act was further amended to increase the security deposit to Rs 15,000 and the minimum number of proposers and seconders to 50 each.


How are the votes calculated?

The Presidential election uses a special voting to tally the votes.  A different voting weightage is assigned to an MP and an MLA.  The value of each MLA's vote is determined based on the population of their state and the number of MLAs.  For instance, an MLA from UP has a value of 208 while an MLA from Sikkim has 7 (see Table 1).  Due to a Constitutional Amendment passed in 2002, the population of the state as per the 1971 census is taken for the calculation.

The value of an MP's vote is the sum of all votes of MLAs across the country divided by the number of elected MPs.  

How will the numbers look in 2022?

In the 2017 Presidential elections, electors from 31 states and the UTs of Delhi and Puducherry participated. However, in 2019, with the Jammu and Kashmir (J&K) Reorganization Act, the number of states were reduced to 30. The J&K Assembly was dissolved as per the Act and a new legislature for the UT of J&K is yet to be reconstituted. UTs with legislatures were not originally part of the electoral college for the election of the President. The Constitution was amended in 1992 to specifically include the UTs of Delhi and Puducherry. Note that for MLAs from J&K to participate in future Presidential elections, a similar Constitutional amendment would be required to be passed by Parliament.

Based on the assumption that J&K is not included in the 2022 Presidential election, the total number of votes of MLAs in 2022 elections will have to be adjusted.  The 87 Jammu and Kashmir MLAs must be removed from the total number of MLAs of 4,120.  Jammu and Kashmir’s contributing vote share of 6,264 must also be reduced from the total vote share of 549,495.  Adjusting for these changes, 4,033 MLAs will participate in the 2022 elections and the combined vote share of all MLAs will add up to 543,231.

Table 1: The value of votes of elected MLAs of different states at the 2017 Presidential Election

Name of State

Number of Assembly seats

Population (1971 Census)

Value of vote of each MLA

Total value of votes for the state (B x D)

A

B

C

D

E

Andhra Pradesh

175

2,78,00,586

159

27,825

Arunachal Pradesh

60

4,67,511

8

480

Assam

126

1,46,25,152

116

14,616

Bihar

243

4,21,26,236

173

42,039

Chhattisgarh

90

1,16,37,494

129

11,610

Goa

40

7,95,120

20

800

Gujarat

182

2,66,97,475

147

26,754

Haryana

90

1,00,36,808

112

10,080

Himachal Pradesh

68

34,60,434

51

3,468

Jammu and Kashmir

87

63,00,000

72

6,264

Jharkhand

81

1,42,27,133

176

14,256

Karnataka

224

2,92,99,014

131

29,344

Kerala

140

2,13,47,375

152

21,280

Madhya Pradesh

230

3,00,16,625

131

30,130

Maharashtra

288

5,04,12,235

175

50,400

Manipur

60

10,72,753

18

1,080

Meghalaya

60

10,11,699

17

1,020

Mizoram

40

3,32,390

8

320

Nagaland

60

5,16,449

9

540

Odisha

147

2,19,44,615

149

21,903

Punjab

117

1,35,51,060

116

13,572

Rajasthan

200

2,57,65,806

129

25,800

Sikkim

32

2,09,843

7

224

Tamil Nadu

234

4,11,99,168

176

41,184

Telangana

119

1,57,02,122

132

15,708

Tripura

60

15,56,342

26

1,560

Uttarakhand

70

44,91,239

64

4,480

Uttar Pradesh

403

8,38,49,905

208

83,824

West Bengal

294

4,43,12,011

151

44,394

NCT of Delhi

70

40,65,698

58

4,060

Puducherry

30

4,71,707

16

480

Total

4,120

54,93,02,005

 

5,49,495

Source: Election Commission of India (2017); PRS.

The value of an MP’s vote correspondingly will change from 708 in 2017 to 700 in 2022. 

Value of one MP's vote =   Total value of all votes of MLAs      =   543231     =    700 
                                              Total number of elected MPs                 776

Note that the value of an MP’s vote is rounded off to the closest whole number. This brings the combined value of the votes of all MPs to 543,200 (700 x 776). 

What is the number of votes required to win?

The voting for the Presidential elections is done through the system of single transferable vote. In this system, electors rank the candidates in the order of their preference. The winning candidate must secure more than half of the total value of valid votes to win the election. This is known as the quota. 

Assuming that each elector casts his vote and that each vote is valid:

Quota = Total value of MP’s votes + Total value of MLA’s votes + 1                                                        
                                                        2

= 543200 + 543231 +1     =   1086431 +1     =    543,216 
                2                                   2

The anti-defection law which disallows MPs from crossing the party line does not apply to the Presidential election. This means that the MPs and MLAs can keep their ballot secret.  

The counting of votes takes place in rounds. In Round 1, only the first preference marked on each ballot is counted. If any of the candidates secures the quota at this stage, he or she is declared the winner. If no candidate secures the quota in the first round, then another round of counting takes place. In this round, the votes cast to the candidate who secures the least number of votes in Round 1 are transferred. This means that these votes are now added to the second preference candidate marked on each ballot. This process is repeated till only one candidate remains. Note that it is not compulsory for an elector to mark his preference for all candidates. If no second preference is marked, then the ballots are treated as exhausted ballots in Round 2 and are not counted further.  

The fifth Presidential election which elected Mr. VV Giri is the only instance when a candidate did not secure the quota in the first round.  The second preference votes were then evaluated and Mr. Giri secured 4,20,077 of the 8,36,337 votes and was declared the President.

The only President of India to win unopposed 
India’s sixth President, Mr. Neelam Sanjiva Reddy who served from 1977 to 1982 was the only President to be elected unopposed.  37 candidates had filed their nominations for the 1977 elections, however on scrutiny, the nomination papers of 36 candidates were rejected by the Returning Officer and Mr. Reddy was the only candidate standing.

The increasing Non-Performing Assets (NPAs) in the Indian banking sector has recently been the subject of much discussion and scrutiny.  Yesterday, the Supreme Court struck down a circular dated February 12, 2018 issued by the Reserve Bank of India (RBI).  The RBI circular laid down a revised framework for the resolution of stressed assets.  In this blog, we examine the extent of NPAs in India, and recent events leading up to the Supreme Court judgement.

What is the extent and effect of the NPA problem in India?

Banks give loans and advances to borrowers. Based on the performance of the loan, it may be categorised as: (i) a standard asset (a loan where the borrower is making regular repayments), or (ii) a non-performing asset. NPAs are loans and advances where the borrower has stopped making interest or principal repayments for over 90 days.

As of 2018, the total NPAs in the economy stand at Rs 9.6 lakh crore.  About 88% of these NPAs are from loans and advances of public sector banks.  Banks are required to lend a certain percentage of their loans to priority sectors.  These sectors are identified by the RBI and include agriculture, housing, education and small scale industries.[1]  In 2018, of the total NPAs, 22% were from priority sector loans, and 78% were from non-priority sector loans. 

In the last few years, gross NPAs of banks (as a percentage of total loans) have increased from 2.3% of total loans in 2008 to 9.3% in 2017 (see Figure 1). This indicates that an increasing proportion of a bank’s assets have ceased to generate income for the bank, lowering the bank’s profitability and its ability to grant further credit.

Figure 1: Gross NPAs (% of total loans)

Source: Reserve Bank of India; PRS

What has been done to address the problem of growing NPAs?

The measures taken to resolve and prevent NPAs can broadly be classified into two kinds – first, remedial measures for banks prescribed by the RBI for internal restructuring of stressed assets, and second, legislative means of resolving NPAs under various laws (like the Insolvency and Bankruptcy Code, 2016).

Remedial Measures

Over the years, the RBI has issued various guidelines for banks aimed at the resolution of stressed assets in the economy. These included introduction of certain schemes such as: (i) Strategic Debt Restructuring (which allowed banks to change the management of the defaulting company), and (ii) Joint Lenders’ Forum (where lenders evolved a resolution plan and voted on its implementation).   A summary of the various schemes implemented by the RBI is provided in Table 1. 

Table 1: Non-legislative loan recovery framework

Loan restructuring

  • Banks internally undertake restructuring of loans, if the borrower is unable to repay the amount.  This involves changing the terms of repayment, which includes altering the payment schedule of loans or interest rates.

Corporate Debt Restructuring

  • Allows for restructuring of a borrower’s outstanding loans from more than one bank.  This mechanism is available if the borrower’s outstanding loans are more than Rs 10 crore.[2]

Joint Lender's Forum

  • Lenders evolve an action plan to resolve the NPA of a defaulter.[3]  If 60% of the creditors by value, and 50% of the creditors by number agree, a recovery plan will be implemented.[4]

5:25 Scheme

  • Banks can extend loan term to 25 years based on cash flow of projects for which the loan was given.  Interest rates and other terms of the loans may be readjusted every five years.[5]

Strategic Debt Restructuring

  • Banks convert their debt into equity to hold a majority of shares in a company.  This allows banks to change the management of the defaulting company.[6]

Sustainable Structuring of Stressed Assets

  • Allows for conversion of a part of the outstanding debt to equity or preference shares if: (i) project for which loan was taken has commenced operations, and (ii) borrower can repay over 50% of the loan.[7]

Sources: RBI scheme guidelines; Economic Survey 2016-17; PRS.

Legislative Measures

  • The Insolvency and Bankruptcy Code (IBC) was enacted in May 2016 to provide a time-bound 180-day recovery process for insolvent accounts. When a default occurs, the creditors or debtor may apply to the National Company Law Tribunal for initiating the resolution process. Once the application is approved, the resolution process will have to be completed within 180 days (extendable by 90 days) from the date of approval.  The resolution process will be presided over by an insolvency professional to decide whether to restructure the loan, or to sell the defaulter’s assets to recover the outstanding amount.  If a timely decision is not arrived at, the defaulter’s assets are liquidated.
  • The Banking Regulation (Amendment) Act, 2017: The amendment allows RBI to direct banks to initiate recovery proceedings against defaulting accounts under the IBC.  Further, under Section 35AA of the Act, RBI may also issue directions to banks for resolution of specific stressed assets. 

In June 2017, an internal advisory committee of RBI identified 500 defaulters with the highest value of NPAs.[8]  The committee recommended that 12 largest non-performing accounts, each with outstanding amounts greater than Rs 5,000 crore and totalling 25% of the NPAs of the economy, be referred for resolution under the IBC immediately.  Proceedings against the 12 largest defaulters have been initiated under the IBC. 

What was the February 12 circular issued by the RBI?

Subsequent to the enactment of the IBC, the RBI put in place a framework for restructuring of stressed assets of over Rs 2,000 crore on or after March 1, 2018.  The resolution plan for such restructuring must be unanimously approved by all lenders and implemented within 180 days from the date of the first default.  If the plan is not implemented within the stipulated time period, the stressed assets are required to be referred to the NCLT under IBC within 15 days.  Further, the framework introduced a provision for early identification and categorisation of stressed assets before they are classified as NPAs.

On what grounds was the RBI circular challenged?

Borrowers whose loans were tagged as NPAs before the release of the circular recently crossed the 180-day deadline for internal resolution by banks. Some of these borrowers, including various power producers and sugar mills, had appealed against the RBI circular in various High Courts. A two-judge bench of the Allahabad High Court ruled in favour of the RBI’s powers to issue these guidelines, and refused to grant interim relief to power producers from being taken to the NCLT for bankruptcy. These batch of petitions against the circular were transferred to the Supreme Court, which issued an order in September 2018 to maintain status quo on the same.

What did the Supreme Court order?

The Court held the circular issued by RBI was outside the scope of the power given to it under Article 35AA of the Banking Regulation (Amendment) Act, 2017.  The Court reasoned that Section 35AA was proposed by the 2017 Act to authorise the RBI to issues directions only in relation to specific cases of default by specific debtors.  It held that the RBI circular issued directions in relation to debtors in general and this was outside their scope of power.  The court also held that consequently all IBC proceedings initiated under the RBI circular are quashed. 

During the proceedings, various companies argued that the RBI circular applies to all corporate debtors alike, without looking into each individual’s sectors problems and attempting to solve them.  For instance, several power companies provided sector specific reasons for delay in payment of bank dues.  The reasons included: (i) cancellation of coal blocks by the SC leading to non-availability of fuel, (ii) lack of enough power purchase agreements by states, (iii) non-payment of dues by DISCOMs, and (iv) delays in project implementation leading to cost overruns.  Note that, in its 40th report, the Parliamentary Standing Committee on Energy analysed the impact of the RBI circular on the power sector and noted that the ‘one size fits all’ approach of the RBI is erroneous. 

 

 

[1] ‘Priority Sector Lending – Targets and Classification’ Reserve Bank of India, July 2012, https://rbi.org.in/scripts/NotificationUser.aspx?Id=7460&Mode=0

[2] Revised Guidelines on Corporate Debt Restructuring Mechanism, Reserve Bank of India, https://www.rbi.org.in/upload/notification/pdfs/67158.pdf

[3] ‘Framework for Revitalising Distressed Assets in the Economy – Guidelines on Joint Lenders’ Forum (JLF) and Corrective Action Plan (CAP)’, Reserve Bank of India, February 26, 2016, https://www.rbi.org.in/scripts/NotificationUser.aspx?Id=8754&Mode=0

[4] Timelines for Stressed Assets, Press Release, Reserve Bank of India, May 5, 2017, https://www.rbi.org.in/Scripts/NotificationUser.aspx?Id=10957&Mode=0

[5] Flexible Structuring of Long Term Project Loans to Infrastructure and Core Industries, RBI, July 15, 2014, https://www.rbi.org.in/scripts/NotificationUser.aspx?Id=9101&Mode=0

[6] Chapter 4, The Economic Survey 2016-17, http://unionbudget.nic.in/es2016-17/echap04.pdf

[7] ‘RBI introduces a ‘Scheme for Sustainable Structuring of Stressed Assets’’ Press Release, Reserve Bank of India, June 13, 2016, https://www.rbi.org.in/Scripts/BS_PressReleaseDisplay.aspx?prid=37210

[8] RBI identifies Accounts for Reference by Banks under the Insolvency and Bankruptcy Code (IBC), Reserve Bank of India, June 13, 2017, https://www.rbi.org.in/scripts/BS_PressReleaseDisplay.aspx?prid=40743