Applications for LAMP Fellowship 2025-26 are now open. Apply here. The last date for submitting applications is December 21, 2024
Finances of the Railways were presented along with the Union Budget on February 1, 2018 (the Railways Budget was merged with the Union Budget last year). In the current Budget Session, Lok Sabha is scheduled to discuss the allocation to the Ministry of Railways. In light of this, we discuss Railways’ finances, and issues that the transporter has been facing with regard to financing.
What are the different sources of revenue for Railways?
Indian Railways has three primary sources of revenue: (i) its own internal resources (revenue from freight and passenger traffic, leasing of railway land, etc.), (ii) budgetary support from the central government, and (iii) extra budgetary resources (such as market borrowings, institutional financing).
Railways’ internal revenue for 2018-19 is estimated at Rs 2,01,090 crore which is 7% higher than the revised estimates of 2017-18. Majority of this revenue comes from traffic (both freight and passenger), and is estimated at Rs 2,00,840 crore. In the last few years, Railways has been struggling to run its transportation business, and generate its own revenue. The growth rate of Railways’ earnings from its core business of running freight and passenger trains has been declining. This is due to a decline in the growth of both freight and passenger traffic (see Figure 1). Railways is also slowly losing traffic share to other modes of transport such as roads and airlines. The share of Railways in total freight traffic has declined from 89% in 1950-51 to 30% in 2011-12.
The Committee on Restructuring Railways (2015) had observed that raising revenue for Railways is a challenge because: (i) investment is made in projects that do not have traffic and hence do not generate revenue, (ii) the efficiency improvements do not result in increasing revenue, and (iii) delays in projects results in cost escalation, which makes it difficult to recover costs. Railways also provides passenger fares that are heavily subsidised, which results in the passenger business facing losses of around Rs 33,000 crore in a year (in 2014-15). Passenger fares are also cross-subsidised by charging higher rates for freight. The consequence is that freight rates have been increasing which has resulted in freight traffic moving towards roads.
Figure 2 shows the trends in capital outlay over the last decade. A decline in internal revenue generation has meant that Railways funds its capital expenditure through budgetary support from the central government and external borrowings. While the support from central government has mostly remained consistent, Railways’ borrowings have been increasing. Various committees have noted that an increased reliance on borrowings will further exacerbate the financial situation of Railways.
The total proposed capital outlay (or capital expenditure) for 2018-19 is Rs 1,48,528 crore which is a 24% increase from the 2017-18 revised estimates (Rs 1,20,000 crore). Majority of this capital expenditure will be financed through borrowings (55%), followed by the budgetary support from the central government (37%). Railways will fund only 8% of its capital expenditure from its own internal resources.
How can Railways raise more money?
The Committee on Restructuring Railways had suggested that Railways can raise more revenue through private participation in the following ways: (i) service and management contracts, (ii) leasing to and from the private sector, (iii) joint ventures, and (iv) private ownership. However, private participation in Railways has been muted as compared to other sectors such as roads, and airports.
One of the key reasons for the failure of private participation in Railways is that policy making, the regulatory function, and operations are all vested within the same organisation, that is, the Ministry of Railways. Railways’ monopoly also discourages private sector entry into the market. The Committee on Restructuring Railways had recommended that the three roles must be separated from each other. It had also recommended setting up an independent regulator for the sector. The regulator will monitor whether tariffs are market determined and competitive.
Where does Railways spend its money?
The total expenditure for 2018-19 is projected at Rs 1,88,100 crore, which is 4% higher than 2017-18. Staff wages and pension together comprise more than half of the Railways’ expenditure. For 2018-19, the expenditure on staff is estimated at Rs 76,452 crore. Allocation to the Pension Fund is estimated at Rs 47,600 crore. These constitute about 66% of the Railways’ expenditure in 2018-19.
Railways’ primary expenditure, which is towards the payment of salaries and pension, has been gradually increasing (with a jump of around 15% each year in 2016-17 and 2017-18 due to implementation of the Seventh Pay Commission recommendations). Further, the pension bill is expected to increase further in the years to come, as about 40% of the Railways staff was above the age of 50 years in 2016-17.
The Committee on Restructuring Railways (2015) had observed that the expenditure on staff is extremely high and unmanageable. This expense is not under the control of Railways and keeps increasing with each Pay Commission revision. It has also been observed that employee costs (including pensions) is one of the key components that reduces Railways’ ability to generate surplus, and allocate resources towards operations.
What is the allocation towards depreciation of assets?
Railways maintains a Depreciation Reserve Fund (DRF) to finance the costs of new assets replacing the old ones. In 2018-19, appropriation to the DRF is estimated at Rs 500 crore, 90% lower than 2017-18 (Rs 5,000 crore). In the last few years, appropriation to the DRF has decreased significantly from Rs 7,775 crore in 2014-15 to Rs 5,000 crore last year. Provisioning Rs 500 crore towards depreciation might be an extremely small amount considering the scale of infrastructure managed by the Indian Railways, and the requirement to replace old assets to ensure safety.
The Standing Committee on Railways (2015) had observed that appropriation to the DRF is the residual amount after appropriation to the Pension Fund, instead of the actual requirement for maintenance of assets. Under-provisioning for the DRF has also been observed as one of the reasons behind the decline in track renewals, and procurement of wagons and coaches.
Is there any provision towards safety?
Last year, the Rashtriya Rail Sanraksha Kosh was created to provide for passenger safety. It was to have a corpus of one lakh crore rupees over a period of five years (Rs 20,000 crore per year). The central government was to provide a seed amount of Rs 1,000 crore, and the remaining amount would be raised by the Railways from their own revenues or other sources.
As per the revised estimates of 2017-18, no money was allocated towards this fund. In 2018-19, Rs 5,000 crore has been allocated for it. With the Railways struggling to meet its expenditure and declining internal revenues, it is unclear how Railways will fund the remaining amount of Rs 95,000 crore for the Rail Sanraksha Kosh.
What happened to the dividend that was waived off last year?
Railways used to pay a return on the budgetary support it received from the government every year, known as dividend. The rate of this dividend was about 5% in 2015-16. From 2016-17, the requirement of paying dividend was waived off. The last dividend amount paid was Rs 8,722 crore in 2015-16.
The Standing Committee on Railways (2017) had noted that part of the benefit from dividend is being utilised to meet the shortfall in the traffic earnings of Railways. This defeats the purpose of removing the dividend liabilities since they are not being utilised in creating assets or increasing the net revenue of Railways.
Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts. It had first recommended these names earlier this year and in August last year, but these appointments were not made. The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts). Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases. As of today, more than four crore cases are pending across all courts in India. In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.
High vacancy of judges across courts
Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges. Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually. However, vacancies persist due to insufficient appointments (see Figures 1 and 2). Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts).
|
Figure 1: Vacancy of judges in High Courts |
Figure 2: Vacancy of judges in subordinate courts |
|
|
|
|
Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS. |
|
As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34). Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098). Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges. In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3). The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled.
|
Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021)
|
|
Source: Vacancy Statement, Department of Justice; PRS. |
Appointments of High Court judges are guided by a memorandum of procedure. As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs. However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts. Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court. No timeline is prescribed for this stage of the appointment process. In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.
As of today, over 3.6 crore cases are pending before subordinate courts in India. As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts. Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4). Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.
For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.
Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)
|
|
|
Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS. |
How many judges do we need?
The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary. Lack of adequate number of judges means a greater workload per judge. Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts. Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1).
Table 1: Methods recommended for calculating the required number of judges for subordinate courts
|
Method of calculation |
Recommendation and its status |
|
Judge-to-population ratio: optimum number of judges per million population |
The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people. This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002). For 2020, the judge-to-population ratio was 21 judges per million population. Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts. |
|
Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge |
The Law Commission of India (2014) proposed this method. It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions. |
|
Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions |
The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method. It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts. In 2017, the Supreme Court accepted this model. |
|
Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study |
Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts. It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court. The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi. |
Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.
