The Monetary Policy Committee (MPC) has decided to conduct an off-cycle meeting today to discuss the failure to meet the inflation target under Section 45ZN of the Reserve Bank of India Act, 1934. As per the Reserve Bank of India Act (RBI), 1934, MPC is required to meet at least four times each year, to discuss the macroeconomic issues in the country, and take policy decisions to address those. This is the second time MPC has conducted an off-cycle meeting in 2022-23. The meeting is scheduled in light of inflation being consistently high for nine consecutive months.

In this blog, we discuss what the inflation targeting framework is, examine retail and wholesale prices, and the divergence between them.   

What is the inflation targeting framework, and what happens if inflation is persistently high?

In 2016, Parliament amended the RBI Act, 1934 to change the monetary policy, and introduce an inflation targeting framework. This framework prioritises price stability to achieve sustainable GDP growth. Price stability allows investors to confidently invest their money for productive activities, without worrying about it losing value. Price stability also maintains the purchasing power of consumers, i.e., the ability to purchase a good (or service) with a given amount of money.

As per the new framework, the central government, in consultation with RBI sets: (i) an inflation target, and (ii) an upper and lower tolerance level for retail inflation. The target has been set at 4%, with an upper tolerance limit of 6% and a lower tolerance limit of 2%. The upper and lower limits indicate that although it is desirable for inflation to be close to 4%, deviation between these limits is acceptable. The target and bands are revised every five years. In March 2021, the existing targets were carried forward.  

Retail inflation has been above 6% for the past nine months, and it has been above 4% from October 2019 onwards (See Figure 1).

Figure 1: Consumer price index (year-on-year; in percentage)

image

Sources: Database on Indian Economy, Reserve Bank of India; PRS.

If inflation is above or below the prescribed limits for three quarters, RBI must submit a report to the central government explaining why prices have been rising (or falling) persistently, what will be done to correct that, and an estimate as to when the target will be achieved.   

The MPC uses tools such as interest rates to control the level of inflation in the economy. One such rate is the policy repo rate, which is the rate at which RBI lends money to banks. An increase in the policy repo rate makes borrowing money more costly, and hence is expected to control inflation by reducing the money supply. MPC increased this rate from 4% in April 2022 to 4.4% in May 2022, to 4.9% in June 2022, to 5.4% in August 2022, and to 5.9% in September 2022.

Breaking down the Consumer Price Index and the Wholesale Price Index

Consumer Price Index (CPI) measures the general prices of goods and services such as food, clothing, and fuel over time. Retail inflation is calculated as the change in the CPI over a period of time. Goods and services such as petrol, food products, health, and education are considered for its calculation, which are assigned different weights (See Table 1). Between February 2022 and August 2022, the average annual inflation was 6.9%. The rise in prices of subcomponents of the CPI during this period is indicated in Table 2.

Table 1: Assigned weights for the calculation of CPI

Category

Weight

Food and beverages

46%

Miscellaneous (including petrol and diesel, health, and education)

28%

Housing

10%

Clothing and footwear

7%

Fuel and light

7%

Pan, tobacco, and intoxications

2%

Total

100%

Sources: MOSPI; PRS.

Table 2: Average inflation of some CPI components
between February 2022 to August 2022 (in percentage)

Subcategory of CPI

Average inflation

Vegetables 

13.26%

Oils and fats

12.46%

Footwear

11.41%

Fuel and Light

9.88%

Transport and communication

7.74%

Cereals and products

6.05%

Sources: Database on Indian Economy, RBI; PRS.

CPI is not the only index that measures inflation in an economy. The Wholesale Price Index (WPI) measures the wholesale prices of goods. A change in wholesale prices reflects wholesale inflation. Table 3 indicates the weights assigned to goods for calculating the WPI. Manufactured goods include metals, chemicals, food products, and textiles.   

Primary articles (23%) include food articles, and crude petroleum and natural gas. Fuel and power (12%) include mineral oils, electricity, and coal.  WPI has remained above 10% from April 2021 onwards. It reached an all-time high of 17% in May 2022. This was driven by the inflation in metals, kerosene and petroleum coke, fruits and vegetables, and palm oil.

Table 3:Assigned weights for the
calculation of WPI (in percentage)

Category

Weight

Manufactured products

64%

Primary articles

23%

Fuel and power

12%

All commodities

100%

Sources: Ministry of Commerce and Industry; PRS.

Why has WPI inflation been consistently above CPI inflation?

Movements in the WPI have an impact on the CPI.  For almost a year and half, CPI inflation has remained below WPI inflation.  However, as per the design of the indices, it is expected that CPI would remain above WPI, and that any increase in WPI would reflect in the CPI after a time lag.  This is because retail prices include taxes (as a percentage of price), while wholesale prices do not.  Additionally, some of the goods in WPI act as inputs in the goods considered in CPI.  An increase in input prices would lead to higher retail prices after a time lag.

We discuss possible reasons for why CPI has remained below WPI for a year and a half.

Figure 2: Consumer Price Index and Wholesale Price Index

image

Sources: Database on Indian Economy, Reserve Bank of India; PRS.

Composition of indices

As indicated in Table 2 and 3, the composition of the two indices varies. For instance, prices of manufacture of basic metals, chemicals, and machinery grew at an average rate of 13% between February 2021 and September 2022.  They contribute 7% to the WPI. These are input goods for producing final goods and services such as automobiles, which are included in the CPI. The rise in prices of transport vehicles, communication devices, fuel for transport, and housing (CPI components) rose by 6% during this period.

The Ministry of Finance has observed that wholesale prices did not feed into retail prices (from March 2021 onwards) as wholesalers absorbed the rising input costs and did not pass them on to retailers. In August 2022, it noted that as retail prices are rising now, the pass-through may occur.

On October 18, it was reportein the news that the central government has been given more time for framing rules under the Citizenship (Amendment) Act, 2019.  The President had given assent to this Act in December 2019 and the Act came into force in January 2020.   Similarly, about two years have passed since the new labour codes were passed by Parliament, and the final Rules are yet to be published.  This raises the question how long the government can take to frame Rules and what is the procedure guiding this.  In this blog, we discuss the same.

Under the Constitution, the Legislature has the power to make laws and the Executive is responsible for implementing them.  Often, the Legislature enacts a law covering the general principles and policies, and delegates the power to the Executive for specifying certain details for the implementation of a law.  For example, the Citizenship Amendment Act provides who will be eligible for citizenship.  The certificate of registration or naturalization to a person will be issued, subject to conditions, restrictions, and manner as may be prescribed by the central government through Rules.  Delay in framing Rules results in delay in implementing the law, since the necessary details are not available.  For example, new labour codes provide a social security scheme for gig economy workers such as Swiggy and Zomato delivery persons and Uber and Ola drivers.  These benefits as per these Codes are yet to be rolled out as the Rules are yet to be notified.

Timelines and checks and balances for adherence

Each House of Parliament has a Committee of Members to examine Rules, Regulations, and government orders in detail called the Committee on Subordinate Legislation.  Over the years, the recommendations of these Committees have shaped the evolution of the procedure and timelines for framing subordinate legislation.  These are reflected in the Manual of Parliamentary Procedures issued by the Ministry of Parliamentary Affairs, which provides detailed guidelines.

Ordinarily, Rules, Regulations, and bye-laws are to be framed within six months from the date on which the concerned Act came into force.   Post that, the concerned Ministry is required to seek an extension from the Parliamentary Committees on Subordinate Legislation.  The reason for the extension needs to be stated.   Such extensions may be granted for a maximum period of three months at a time.  For example, in case of Rules under the Citizenship Amendment Act, 2019, at an earlier instance, an extension was granted on account of the onset of the COVID-19 pandemic.

Activity

Timeline

  • Publication of Rules, Regulations, and Bye-Laws, where public consultation is required under the Act
  • A minimum of 30 days for public feedback
  • Consequently, for publication,
  • Three months, if the number of suggestions is small
  • Six months, if the number of suggestions is large
  • Publication of Rules, Regulations, and Bye-Laws, not requiring public consultation
  • Six months from the date on which the concerned Act came into force
  • Any extension for publication
  • A maximum of three months at a time

To ensure monitoring, every Ministry is required to prepare a quarterly report on the status of subordinate legislation not framed and share it with the Ministry of Law and Justice.  These reports are not available in the public domain.

Recommendations to address delays

Over the years, the Subordinate Legislation Committees in both Houses have observed multiple instances of non-adherence to the above timelines by various Ministries.  To address this, they have made the following key recommendations:

  • Statement on reasons for the delay: In 2011, Rajya Sabha Committee recommended that while laying Rules/Regulations before Parliament, the Ministry should also lay a statement explaining the reasons for the delay, if any.
  • Scrutiny of delays by the Cabinet Secretary:  In 2016, the Rajya Sabha Committee recommended that the Cabinet Secretary should continue the practice of calling the Secretaries of concerned Ministries/Departments, to explain the reasons for the delay in framing the subordinate legislation.  Each Ministry should send a quarterly status report to the Cabinet Secretariat.
  • Revisiting guidelines: In 2011, Lok Sabha Committee recommended that the 1986 guidelines should be revisited and all major recommendations of the Committee should be incorporated.  However, as per the Action Taken Report, the government observed that the ministries consider the extant guidelines adequate and these guidelines were re-iterated in 2012.

Are all Rules under an Act required to be framed?

Usually, the expressions used in an Act are “The Central Government may, by notification, make rules for carrying out the provisions of this Act.”, or “as may be prescribed”.  Hence, it may appear that the laws aim to enable rule-making instead of mandate rule-making.  However, certain provisions of an Act cannot be brought into force if the required details have not been prescribed under the Rules.  This makes the implementation of the Act consequent to the publication of respective Rules.  For example, the Criminal Procedure (Identification) Act, 2022 enables the police and certain other persons to collect identity-related information about certain persons.  It provides that the manner of collection of such information may be specified by the central government.  Unless the manner is prescribed, such collection cannot take place.

That said, some other rule-making powers may be enabling in nature and subject to discretion by the concerned Ministry.  In 2016, Rajya Sabha Committee on Subordinate Legislation examined the status of Rules and Regulations to be framed under the Energy Conservation Act, 2001.  It observed that the Ministry of Power had held that two Rules and three Regulations under this Act were not necessary.   The Ministry of Law and Justice had opined that those deemed not necessary were enabling provisions meant for unforeseen circumstances.  The Rajya Sabha Committee (2016) had recommended that where the Ministry does not feel the need for framing subordinate legislation, the Minister should table a statement in Parliament, stating reasons for such a conclusion.

Some key issues related to subordinate legislation

The Legislature delegates the power to specify details for the implementation of a law to the Executive through powers for framing subordinate legislation.  Hence, it is important to ensure these are well-scrutinised so that they are within the limits envisaged in the law.

  • Capacity of Committees on Subordinate Legislation:  Parliamentary Committees on Subordinate Legislation have the responsibility to examine Rules in detail.  In past, they have examined some key rules, regulations, and notifications regarding e-commerceliability of internet-based services, and demonetisation.  However, usually, they are able to examine only a fraction of subordinate legislation in detail.  For more details, please see the PRS discussion paper here.
  • Uniformity of standards:  Countries such as UKUSAAustralia, and Canada have overarching legislation for regulating the framing of subordinate legislation.  These laws provide for the manner of public consultation, timelines, drafting standards, and a common register.  India does not have any similar law.  In India, the detail whether public consultation for subordinate legislation is required or not, is specified in respective Acts.  The General Clauses Act, 1897 also governs certain aspects of the framing of subordinate legislation.  In addition, the Pre-Legislative Consultation Policy, 2014 guides the pre-legislative consultation on subordinate legislation.

See here for our recently published analysis of the Criminal Procedure (Identification) Rules, 2022, notified in September 2022.  Also, check out PRS analysis of: