The Monetary Policy Committee (MPC) has decided to conduct an off-cycle meeting today to discuss the failure to meet the inflation target under Section 45ZN of the Reserve Bank of India Act, 1934. As per the Reserve Bank of India Act (RBI), 1934, MPC is required to meet at least four times each year, to discuss the macroeconomic issues in the country, and take policy decisions to address those. This is the second time MPC has conducted an off-cycle meeting in 2022-23. The meeting is scheduled in light of inflation being consistently high for nine consecutive months.

In this blog, we discuss what the inflation targeting framework is, examine retail and wholesale prices, and the divergence between them.   

What is the inflation targeting framework, and what happens if inflation is persistently high?

In 2016, Parliament amended the RBI Act, 1934 to change the monetary policy, and introduce an inflation targeting framework. This framework prioritises price stability to achieve sustainable GDP growth. Price stability allows investors to confidently invest their money for productive activities, without worrying about it losing value. Price stability also maintains the purchasing power of consumers, i.e., the ability to purchase a good (or service) with a given amount of money.

As per the new framework, the central government, in consultation with RBI sets: (i) an inflation target, and (ii) an upper and lower tolerance level for retail inflation. The target has been set at 4%, with an upper tolerance limit of 6% and a lower tolerance limit of 2%. The upper and lower limits indicate that although it is desirable for inflation to be close to 4%, deviation between these limits is acceptable. The target and bands are revised every five years. In March 2021, the existing targets were carried forward.  

Retail inflation has been above 6% for the past nine months, and it has been above 4% from October 2019 onwards (See Figure 1).

Figure 1: Consumer price index (year-on-year; in percentage)

image

Sources: Database on Indian Economy, Reserve Bank of India; PRS.

If inflation is above or below the prescribed limits for three quarters, RBI must submit a report to the central government explaining why prices have been rising (or falling) persistently, what will be done to correct that, and an estimate as to when the target will be achieved.   

The MPC uses tools such as interest rates to control the level of inflation in the economy. One such rate is the policy repo rate, which is the rate at which RBI lends money to banks. An increase in the policy repo rate makes borrowing money more costly, and hence is expected to control inflation by reducing the money supply. MPC increased this rate from 4% in April 2022 to 4.4% in May 2022, to 4.9% in June 2022, to 5.4% in August 2022, and to 5.9% in September 2022.

Breaking down the Consumer Price Index and the Wholesale Price Index

Consumer Price Index (CPI) measures the general prices of goods and services such as food, clothing, and fuel over time. Retail inflation is calculated as the change in the CPI over a period of time. Goods and services such as petrol, food products, health, and education are considered for its calculation, which are assigned different weights (See Table 1). Between February 2022 and August 2022, the average annual inflation was 6.9%. The rise in prices of subcomponents of the CPI during this period is indicated in Table 2.

Table 1: Assigned weights for the calculation of CPI

Category

Weight

Food and beverages

46%

Miscellaneous (including petrol and diesel, health, and education)

28%

Housing

10%

Clothing and footwear

7%

Fuel and light

7%

Pan, tobacco, and intoxications

2%

Total

100%

Sources: MOSPI; PRS.

Table 2: Average inflation of some CPI components
between February 2022 to August 2022 (in percentage)

Subcategory of CPI

Average inflation

Vegetables 

13.26%

Oils and fats

12.46%

Footwear

11.41%

Fuel and Light

9.88%

Transport and communication

7.74%

Cereals and products

6.05%

Sources: Database on Indian Economy, RBI; PRS.

CPI is not the only index that measures inflation in an economy. The Wholesale Price Index (WPI) measures the wholesale prices of goods. A change in wholesale prices reflects wholesale inflation. Table 3 indicates the weights assigned to goods for calculating the WPI. Manufactured goods include metals, chemicals, food products, and textiles.   

Primary articles (23%) include food articles, and crude petroleum and natural gas. Fuel and power (12%) include mineral oils, electricity, and coal.  WPI has remained above 10% from April 2021 onwards. It reached an all-time high of 17% in May 2022. This was driven by the inflation in metals, kerosene and petroleum coke, fruits and vegetables, and palm oil.

Table 3:Assigned weights for the
calculation of WPI (in percentage)

Category

Weight

Manufactured products

64%

Primary articles

23%

Fuel and power

12%

All commodities

100%

Sources: Ministry of Commerce and Industry; PRS.

Why has WPI inflation been consistently above CPI inflation?

Movements in the WPI have an impact on the CPI.  For almost a year and half, CPI inflation has remained below WPI inflation.  However, as per the design of the indices, it is expected that CPI would remain above WPI, and that any increase in WPI would reflect in the CPI after a time lag.  This is because retail prices include taxes (as a percentage of price), while wholesale prices do not.  Additionally, some of the goods in WPI act as inputs in the goods considered in CPI.  An increase in input prices would lead to higher retail prices after a time lag.

We discuss possible reasons for why CPI has remained below WPI for a year and a half.

Figure 2: Consumer Price Index and Wholesale Price Index

image

Sources: Database on Indian Economy, Reserve Bank of India; PRS.

Composition of indices

As indicated in Table 2 and 3, the composition of the two indices varies. For instance, prices of manufacture of basic metals, chemicals, and machinery grew at an average rate of 13% between February 2021 and September 2022.  They contribute 7% to the WPI. These are input goods for producing final goods and services such as automobiles, which are included in the CPI. The rise in prices of transport vehicles, communication devices, fuel for transport, and housing (CPI components) rose by 6% during this period.

The Ministry of Finance has observed that wholesale prices did not feed into retail prices (from March 2021 onwards) as wholesalers absorbed the rising input costs and did not pass them on to retailers. In August 2022, it noted that as retail prices are rising now, the pass-through may occur.

The results of General Election 2019 were declared last week concluding the process for electing the 17th Lok Sabha.  Immediately after the results, the previous Lok Sabha was dissolved.  The next couple of days will witness several key events such as swearing-in ceremony of the Prime Minister and Cabinet, and the first session of the 17th Lok Sabha.  In the first session, the newly elected MPs will take their oaths, the Speaker of the 17th Lok Sabha will be elected, and the President will address a joint sitting of Parliament.   In this blog, we explain the process and significance of the events that will follow in the days to come.

Key Events in the First Session of the 17th Lok Sabha

The Bharatiya Janta Party has emerged as the single largest party and the leader of the party will be sworn-in as the Prime Minister.  As per Article 75(1) of the Constitution, the other ministers are appointed by the President on the advice of the Prime Minister.  The 91st Amendment to the Constitution limits the total size of the Council of Ministers to 15% of the total strength of the House (i.e., 81 Ministers).  As per media reports, swearing-in of the Council of Ministers is scheduled for May 30, 2019.

How is the schedule for first session decided?

The 17th Lok Sabha will commence its first session in the first week of June.  The exact date of commencement of the first session and the schedule of key events in the session, including the date of President’s address, is decided by the Cabinet Committee on Parliamentary Affairs.  This Committee will be set up after the swearing in of the Council of Ministers.  The previous Lok Sabha had commenced on June 4, 2014 and its first session had six sitting days (June 4, 2014 to June 11, 2014). 

Who presides over the first session?

Every proceeding of the House is presided by a Speaker.  The Office of the Speaker becomes vacant immediately before the first meeting of a new Lok Sabha.  Therefore, a temporary speaker, known as the pro-tem Speaker, is chosen from among the newly elected MPs.  The pro-tem Speaker administers oath/affirmation to the newly elected members, and also presides over the sitting in which the new Speaker is elected.  The office of the pro-tem Speaker ceases to exist when the new Speaker is elected.  

How is the pro-tem speaker chosen?

Once the new government is elected, a list containing the names of the senior-most members of the House is prepared.  The seniority is decided by total tenure as a member of either Lok Sabha or Rajya Sabha.  The Prime Minister then identifies a Member from the list who acts as the Speaker pro-tem.  Three other members are also identified before whom other members may take oath/affirmation.

How is the new Speaker chosen?

Any member may give notice of a motion that another Member be chosen as the Speaker of the House.  The motions are then moved and voted upon.  After the results are announced, the Speaker-elect is felicitated by leaders of all political parties, including the Prime Minister and Leader of the Opposition.  From then, the new Speaker takes over the proceedings of the House.

An understanding of the Constitution, the Rules of Procedure, and conventions of Parliament is considered a major asset for the Speaker.  While this might indicate that a Speaker be one of the senior-most members of the House, this has not always been the norm.  There have been occasions in the past where the Speaker of the House was a first-time MP.  For instance, Mr. K.S. Hegde, the Speaker of the sixth Lok Sabha and Mr. Bal Ram Jakhar, the Speaker of the seventh Lok Sabha were both first time MPs

What is the role of the Speaker in the House?

The Speaker is central to the functioning of the legislature.  The proceedings of the House are guided by the Rules of Procedure and the final authority for the interpretation and implementation of these rules rests with the Speaker.  The Speaker is responsible for regulating the discussion in the House and maintaining order in the House.  For instance, it is the Speaker’s discretion on whether to allow a member to raise a matter of public importance in the House.  The Speaker can suspend a sitting member for obstructing the business of the House, or adjourn the House in case of major disorder.

The Speaker is also the chair of the Business Advisory Committee, which is responsible for deciding the business of the House and allocating time for the same.  The Speaker also chairs the General Purposes Committee and the Rules Committee of the Lok Sabha and appoints the chairpersons of other committees amongst the members.  In the past, Speakers have also been instrumental in strengthening the Committee system.  Mr. Shivraj Patil, the Speaker of the 10th Lok Sabha, played a key role in the initiation of 17 Departmental Standing Committees, therefore strengthening Parliament’s control over the functioning of different ministries of the government.

Since the Speaker represents the entire House, the office of the Speaker is vested with impartiality and independence.  The Constitution and the Rules of Procedure have prescribed guidelines for the Speaker’s office to ensure such impartiality and independence.  Dr. N. Sanjiva Reddy, the Speaker of the fourth Lok Sabha, formally resigned from his political party as he was of the opinion that the Speaker belongs to the whole House and should therefore remain impartial.  As per Article 100 of the Constitution, the Speaker does not exercise vote on any matter being voted upon, in the first instance.  However, in case there’s a tie during the voting, the Speaker exercises her vote. 

What does the President’s Address entail?

The election of the Speaker is followed by the President’s Address.  Article 87 of the Constitution requires the President to address both Houses at the beginning of the first session after each general election.  The President also addresses both the Houses at the beginning of the first session of each year.  The President’s address highlights the initiatives of the government from the previous year, and mentions the policy priorities for the upcoming year.  After the address, the ruling party moves a Motion of Thanks to the President’s address in both Houses of Parliament.  In the Motion of Thanks, MPs may move amendments to the motion, which are then put to vote. 

The President of India, Mr. Ram Nath Kovind will address Parliament in this first session of the 17th Lok Sabha.  During the 16th Lok Sabha, the first President’s address was held on June 9, 2014 and the last time he addressed Parliament was on January 31, 2019 (highlights of this address can be read here).

 

Sources: The Constitution of India; Rules and Procedure and Conduct of Business in Lok Sabha; Handbook on the Working of Ministry of Parliamentary Affairs; The website of Parliament of India, Lok Sabha; The website of Office of the Speaker, Lok Sabha.