Parliament

JPC vs PAC

admin_2 - December 2, 2010

By Chakshu Rai and Anirudh Burman What is the difference between a JPC and a PAC? A structured committee system was introduced in 1993 to provide for greater scrutiny of government functioning by Parliament. Most committees of Parliament include MPs from both the Lok Sabha and Rajya Sabha. A Joint Parliamentary Committee (JPC) is an ad-hoc body. It is set up for a specific object and duration. Joint committees are set up by a motion passed in one house of Parliament and agreed to by the other. The details regarding membership and subjects are also decided by Parliament. For example, the motion to constitute a JPC on the stock market scam (2001) and pesticide residues in soft drinks (2003) was moved by the government in the Lok Sabha. The motion on the stock market scam constituted a JPC of 30 members of which 20 were from the Lok Sabha and 10 were from the Rajya Sabha. The motion to constitute the JPC on pesticides included 10 members from the Lok Sabha and 5 from the Rajya Sabha. The terms of reference for the JPC on the stock market scam asked the committee to look into financial irregularities, to fix responsibility on persons and institutions for the scam, to identify regulatory loopholes and also to make suitable recommendations. The Public Accounts Committee (PAC), however, is constituted every year. Its main duty is to ascertain how the money granted (budget) by Parliament has been spent by the government. The PAC scrutinises the accounts of the government on the basis of CAG reports. The composition and functions of the committee are governed by parliamentary procedures. The PAC can consist of 15 to 22 members. Not more than 15 members can be from the Lok Sabha, and the representation from the Rajya Sabha cannot exceed 7 members. A minister cannot be a member of the PAC. What can a JPC do that a PAC cannot? The PAC examines cases involving losses and financial irregularities. Its examination is usually limited to the scrutiny of CAG reports and issues raised by the reports. The committee expresses no opinion on points of general policy, but it is within PAC’s jurisdiction to point out whether there has been waste in carrying out that policy. The mandate of a JPC depends on the motion constituting it. This need not be limited to the scrutiny of government finances. How many JPCs have we had so far? Although a number of joint committees have been formed since Independence, four major JPCs have been formed to investigate significant issues that have caused controversy. These are: (1) Joint Committee on Bofors Contracts; (2) Joint Committee to enquire into irregularities in securities and banking transactions; (3) Joint Committee on stock-market scam; and (4) Joint Committee on pesticide residues in and safety standards for soft drinks. How effective have JPCs been? Is the government bound by their recommendations? JPC recommendations have persuasive value but the committee cannot force the government to take any action on the basis of its report. The government may decide to launch fresh investigations on the basis of a JPC report. However, the discretion to do so rests entirely with the government. The government is required to report on the follow-up action taken on the basis of the recommendations of the JPC and other committees. The committees then submit ‘Action Taken Reports’ in Parliament on the basis of the government’s reply. These reports can be discussed in Parliament and the government can be questioned on the basis of the same. How effective is the PAC process? Between 2005 and 2010, the PAC has prepared 54 reports and examined ministries that have cumulatively received around 80% of the budgetary allocations in the last five financial years. Since it is not possible to examine every CAG audit finding in a formal manner, ministries have to submit Action Taken Notes to the PAC on all audit paragraphs. A 2009-10 report of the PAC, however, noted that there were 4,934 audit paragraphs still pending with various ministries. What can the JPC or the PAC find in the 2G case that is not already known, that the CAG and the Trai have not already said? The JPC or the PAC can only look at the documents and examine ministry officials who testify before the committee. The parliamentary committees can arrive at independent conclusions based on the documents placed before them. Members of the committee can also place dissent notes if they do not agree with the majority. Can Raja be tried and the telecom licences cancelled on basis of a JPC report or do we need a CBI report as well? Prosecution of individuals and cancellation of licences are executive functions and can only be initiated by the government. A JPC report can recommend the prosecution of a particular person or the cancellation of certain licences. However, the government can disagree with the JPC’s findings and refuse to take such action. How much of Parliament time have we lost already and how many critical Bills are stuck? The Lok Sabha and Rajya Sabha are supposed to work daily for six hours and five hours, respectively. The Lok Sabha has worked for five hours and forty five minutes and Rajya Sabha has worked for an hour and twenty five minutes in the past 12 days. Some important Bills that are listed for consideration and passing in Parliament are the Seeds Bill, 2004; the Commercial Division of High Courts Bill, 2009; and the Amendment to the Right to Education Act, 2010. Bills listed for introduction include the National Identification Authority Bill, 2010; the Protection of Women from Sexual Harassment in Workplace Bill, 2010; the Judicial Standards and Accountability Bill, 2010; Land Acquisition (Amendment) Bill; and the Rehabilitation and Resettlement Bill. This article appeared in Financial Express.

Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts.  It had first recommended these names earlier this year and in August last year, but these appointments were not made.  The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts).  Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases.  As of today, more than four crore cases are pending across all courts in India.   In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.

High vacancy of judges across courts

Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges.  Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually.  However, vacancies persist due to insufficient appointments (see Figures 1 and 2).  Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts). 

Figure 1: Vacancy of judges in High Courts

Figure 2: Vacancy of judges in subordinate courts

image

image

Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS.

As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34).  Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098).  Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges.  In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3).  The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled. 

Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021)

image

Source: Vacancy Statement, Department of Justice; PRS.

 

 

 

 

 

 

 

 

 

Appointments of High Court judges are guided by a memorandum of procedure.  As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs.  However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts.  Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court.  No timeline is prescribed for this stage of the appointment process.  In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.

As of today, over 3.6 crore cases are pending before subordinate courts in India.  As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts.  Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4).  Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.

For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.

Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)

image

Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS.

 

How many judges do we need?

The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary.  Lack of adequate number of judges means a greater workload per judge.  Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts.  Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1). 

Table 1: Methods recommended for calculating the required number of judges for subordinate courts

Method of calculation

Recommendation and its status

Judge-to-population ratio: optimum number of judges per million population

The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people.  This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002).  For 2020, the judge-to-population ratio was 21 judges per million population.     Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts.

Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge

The Law Commission of India (2014) proposed this method.  It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions.

Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions

The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method.     It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts.     In 2017, the Supreme Court accepted this model.

Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study

Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts.  It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court.  The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi.

Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.