Yesterday, the government circulated certain official amendments to the Constitution (122nd Amendment) Bill, 2014 on GST.  The Bill is currently pending in Rajya Sabha.  The Bill was introduced and passed in Lok Sabha in May 2015.  It was then referred to a Select Committee of Rajya Sabha which submitted its report in July 2015.  With the Bill listed for passage this week, we explain key provisions in the Bill, and the amendments proposed. What is the GST? Currently, indirect taxes are imposed on goods and services.  These include excise duty, sales tax, service tax, octroi, customs duty etc.  Some of these taxes are levied by the centre and some by the states.  For taxes imposed by states, the tax rates may vary across different states.  Also, goods and services are taxed differently. The Goods and Services Tax (GST) is a value added tax levied across goods and services at the point of consumption.  The idea of a GST regime is to subsume most indirect taxes under a single taxation regime.  This is expected to help broaden the tax base, increase tax compliance, and reduce economic distortions caused by inter-state variations in taxes. What does the 2014 Bill on GST do? The 2014 Bill amends the Constitution to give concurrent powers to Parliament and state legislatures to levy a Goods and Services tax (GST).  This implies that the centre will levy a central GST (CGST), while states will be permitted to levy a state GST (SGST).  For goods and services that pass through several states, or imports, the centre will levy another tax, the Integrated GST (IGST). Alcohol for human consumption has been kept out of the purview of GST.  Further, GST will be levied on 5 types of petroleum products at a later date, to be decided by the GST Council.  The Council is a body comprising of Finance Ministers of the centre and all states (including Delhi and Puducherry).  This body will make recommendations in relation to the implementation of GST, including the rates, principles of levy, etc.  The Council is also to decide the modalities for resolution of disputes that arise out of its recommendations. States may be given compensation for any revenue losses they may face from the introduction of the GST regime.  Such compensation may be provided for a period of up to five years. Further, the centre may levy an additional tax, up to 1%, in the course of interstate trade.  The revenues from the levy of this tax will be given to the state from where the good originates.  Expert bodies like the Select Committee and the Arvind Subramanian Committee have observed that this provision could lead to cascading of taxes (as tax on tax will be levied).[i]  It also distorts the creation of a national market, as a product made in one state and sold in another would be more expensive than one made and sold within the same state. What are the key changes proposed by the 2016 amendments? The amendments propose three key changes to the 2014 Bill.  They relate to (i) additional tax up to 1%; (ii) compensation to states; and (iii) dispute resolution by the GST Council.

  • Additional tax up to 1% on interstate trade: The amendments delete the provision.
  • Compensation to states: The amendments state that Parliament shall, by law, provide for compensation to states for any loss of revenues, for a period which may extend to five years. This would be based on the recommendations of the GST Council.  This implies that (i) Parliament must provide compensation; and (ii) compensation cannot be provided for more than five years, but allows Parliament to decide a shorter time period.  The 2014 Bill used the term ‘may’ instead of ‘shall’.   The Select Committee had recommended that compensation should be provided for a period of five years.  This recommendation has not been addressed by the 2016 amendments.
  • Dispute resolution: The GST Council shall establish a mechanism to adjudicate any dispute arising out of its recommendations. Disputes can be between: (a) the centre vs. one or more states; (b) the centre and states vs. one or more states; (c) state vs. state.  This implies that there will be a standing mechanism to resolve disputes.

These amendments will be taken up for discussion with the Bill in Rajya Sabha this week.  The Bill requires a special majority for its passage as it is a Constitution Amendment Bill (that is at least 50% majority of the total membership in the House, and 2/3rds majority of all members present and voting).  If the Bill is passed with amendments, it will have to be sent back to Lok Sabha for consideration and passage.  After its passage in Parliament, at least 50% state legislatures will have to pass resolutions to ratify the Bill. Once the constitutional framework is in place, the centre will have to pass simple laws to levy CGST and IGST.  Similarly, all states will have to pass a simple law on SGST.  These laws will specify the rates of the GST to be levied, the goods and services that will be included, the threshold of the turnover of businesses to be included, etc.  Note that the Arvind Subramanian Committee, set up by the Finance Ministry, recommended the rates of GST that may be levied.  The table below details the bands of rates proposed.

Table 1: Rates of GST recommended by Expert Committee headed by Arvind Subramanian
Type of rate Rate Details
Revenue Neutral Rate 15% Single rate which maintains revenue at current levels.
Standard Rate 17-18% Too be applied to most goods and services
Lower rates 12% To be applied to certain goods consumed by the poor
Demerit rate 40% To be applied on luxury cars, aerated beverages, paan masala, and tobacco
Source: Arvind Subramanian Committee Report (2015)

Several other measures related to the back end infrastructure for registration and reporting of GST, administrative officials related to GST, etc. will also have to be put in place, before GST can be rolled out. [For further details on the full list of amendments, please see here.  For other details on the GST Bill, please see here.]

The counting of votes for General Election 2019, which concluded on Sunday, will begin tomorrow, i.e., 23rd May at 8 AM.  The election was conducted in 7 phases for 543 constituencies of Lok Sabha.  The Election Commission of India (ECI) uses Electronic Voting Machines (EVM) to conduct elections. Since 2000, ECI has conducted 113 assembly elections and three general elections using EVMs.[1]  Voter Verified Paper Audit Trail (VVPAT) system was added to EVMs in 2013 to increase transparency and improve voter confidence in the system.  The VVPAT system generates a printed paper slip bearing the name and election symbol of the candidate.  On April 8, 2019, Supreme Court instructed the ECI that printed VVPAT slips from randomly selected five polling stations in each assembly segment of a parliamentary constituency should be matched with EVMs.[2]  In this blog, we explain the election counting process in India.

Who is responsible for counting the votes?

The Returning Officer (RO) is responsible for conducting elections in a constituency, which also includes counting of votes.[3] The RO is an officer of the government or a local authority nominated by the ECI for each constituency in consultation with the state government.[4]

Where does the counting take place?

The RO decides the place where the votes will be counted for the parliamentary constituency.  The date and time of counting is fixed by the ECI.  Ideally counting of votes for a constituency should be done at one place, preferably at the Headquarter of the RO in that constituency.  It should be performed under the direct supervision of the RO.  However, each Parliamentary Constituency has multiple assembly segments.  In this situation, counting can take place at different locations for various assembly segments under the direct supervision of an Assistant Returning Officer (ARO).

Layout of the Counting Hall

Page 431, Handbook for Returning Officer Document 23 Edition 1, Election Commission of India

Counting of votes for each assembly segment of a parliamentary constituency is performed in a single hall.  In each round of counting, votes from 14 EVMs are counted.  In case of simultaneous parliamentary and assembly elections, such as Odisha, the first seven tables are used for counting votes for assembly elections, and the rest for parliamentary elections.

In constituencies with a large number of candidates, it may not be possible to count votes for all candidates in a single hall without overcrowding it.  In such a situation, the number of counting halls or tables can be increased with the prior permission of the ECI.  A hall can also be used for counting votes of another assembly segment after the results of the first segment are declared.  However, counting may be done for only one assembly segment in a hall at any point of time.

What is the counting process?

Counting is performed by counting supervisors appointed by the RO.  Counting staff is appointed through a three stage randomisation process to ensure impartiality.  Candidates along with their counting agents and election agents are also present in the counting hall.

Counting of votes begins with Electronically Transmitted Postal Ballots (ETPB) and Postal Ballots (PB). These votes are counted under the direct supervision of the RO. Counting of EVMs can start 30 minutes after the commencement of PB counting, even if all PBs have not been counted.  At the end of each round of counting, the results from 14 EVMs are declared.

What is the process for counting VVPAT slips?

The ECI prescribes the process for randomly selecting one EVM for each assembly segment of a parliamentary constituency for VVPAT matching.  The verification of VVPAT paper slips is conducted inside a secured VVPAT Counting Booth in the counting hall with access to authorised personnel only.  Any counting table in the hall can be converted into VVPAT Counting Booth after completing EVM vote counting.  Parliamentary constituencies generally have between five and ten assembly segments.

The Supreme Court has decided that VVPAT slips of five randomly selected polling stations for each assembly segment shall be matched with the result shown in the respective EVMs.  This implies that VVPAT paper slips need to be matched for about 25-50 machines for each parliamentary constituency.  This process requires personal supervision of RO/ARO.  The ECI has decided that the counting of five VVPATs will be done sequentially.[5]  The RO can declare the final result for the constituency after the VVPAT matching process has been completed.

What happens if there is a discrepancy between the VVPAT count and the EVM results?

In such a case, the printed paper slips count is taken as final. The ECI has not clarified whether there would be any further action (such as counting of all VVPATs in a constituency or assembly segment) if there is a discrepancy in the counts of one of the five VVPATs.

[1] https://www.eci.gov.in/files/file/8756-status-paper-on-evm-edition-3/.

[2] N Chandrababu Naidu and Ors. v. Union of India and Anr WP(C). 273/2019 decided on April 8, 2019.

[3] https://www.eci.gov.in/files/file/9400-hand-book-for-returning-officer-february-2019/.

[4] https://www.eci.gov.in/faqs/elections/election-machinery/faqs-election-machinery-r1/.

[5] https://www.eci.gov.in/files/file/10197-mandatory-verification-of-vvpat-paper-slips-regarding/.