The Saansad Adarsh Gram Yojana was launched last week, for the development of model villages. Under the Yojana, Members of Parliament (MPs) will be responsible for developing the socio-economic and physical infrastructure of three villages each by 2019, and a total of eight villages each by 2024.
The first Adarsh Gram must be developed by 2016, and two more by 2019. From 2019 to 2024, five more Adarsh Grams must be developed by each MP, one each year. This implies that a total of 6,433 Adarsh Grams, of the 2,65,000 gram panchayats, will be created by 2024. Key features of the Yojana are outlined below.
Objectives
Key objectives of the Yojana include:
Identification of villages
MPs can select any gram panchayat, other than their own village or that of their spouse, to be developed as an Adarsh Gram. The village must have a population of 3000-5000 people if it is located in the plains, or 1000-3000 people if located in hilly areas.
Lok Sabha MPs can choose a village from their constituency, and Rajya Sabha MPs from the state from which they are elected. Nominated members can choose a village from any district of the country. MPs which represent urban constituencies can identify a village from a neighbouring rural constituency.
Funding
No new funds have been allocated for the Yojana. Resources may be raised through:
Implementation
A Village Development Plan must be created for each Adarsh Gram. While each village will develop a list of activities to be carried out, based on its own resources and requirements, possible activities have been listed in the guidelines for the scheme. For example, Adarsh Grams can work towards providing universal access to basic healthcare facilities, promoting diversified livelihoods through agriculture related livelihoods and skill development, providing pension for all eligible families, housing for all, and promoting social forestry.
The table below outlines key functionaries at the national, state, district, and village level and their responsibilities.
Table 1: Roles and responsibilities of key functionaries
| Level | Functionary | Key roles and responsibilities |
| National | Member of Parliament |
|
| Two committees, headed by the Minister of Rural Development, and Secretary, Rural Development, respectively.* |
|
|
| State | A committee headed by the Chief Secretary |
|
| District | District Collector |
|
| Village | Gram Panchayat and functionaries of schemes (at various levels) |
|
Note: *These committees will include members from other Ministries.
Sources: Saansad Adarsh Gram Yojana Guidelines, Ministry of Rural Development; PRS
Monitoring
A web based monitoring system will be established to enable the MP and other stakeholders to monitor the scheme. Outputs relating to physical and financial targets will be measured each quarter. A mid-term evaluation and post-project evaluation will be conducted through an independent agency.
More information on the scheme is available in the guidelines for the scheme, here.
The Monetary Policy Committee (MPC) has decided to conduct an off-cycle meeting today to discuss the failure to meet the inflation target under Section 45ZN of the Reserve Bank of India Act, 1934. As per the Reserve Bank of India Act (RBI), 1934, MPC is required to meet at least four times each year, to discuss the macroeconomic issues in the country, and take policy decisions to address those. This is the second time MPC has conducted an off-cycle meeting in 2022-23. The meeting is scheduled in light of inflation being consistently high for nine consecutive months.
In this blog, we discuss what the inflation targeting framework is, examine retail and wholesale prices, and the divergence between them.
What is the inflation targeting framework, and what happens if inflation is persistently high?
In 2016, Parliament amended the RBI Act, 1934 to change the monetary policy, and introduce an inflation targeting framework. This framework prioritises price stability to achieve sustainable GDP growth. Price stability allows investors to confidently invest their money for productive activities, without worrying about it losing value. Price stability also maintains the purchasing power of consumers, i.e., the ability to purchase a good (or service) with a given amount of money.
As per the new framework, the central government, in consultation with RBI sets: (i) an inflation target, and (ii) an upper and lower tolerance level for retail inflation. The target has been set at 4%, with an upper tolerance limit of 6% and a lower tolerance limit of 2%. The upper and lower limits indicate that although it is desirable for inflation to be close to 4%, deviation between these limits is acceptable. The target and bands are revised every five years. In March 2021, the existing targets were carried forward.
Retail inflation has been above 6% for the past nine months, and it has been above 4% from October 2019 onwards (See Figure 1).
Figure 1: Consumer price index (year-on-year; in percentage)
Sources: Database on Indian Economy, Reserve Bank of India; PRS.
If inflation is above or below the prescribed limits for three quarters, RBI must submit a report to the central government explaining why prices have been rising (or falling) persistently, what will be done to correct that, and an estimate as to when the target will be achieved.
The MPC uses tools such as interest rates to control the level of inflation in the economy. One such rate is the policy repo rate, which is the rate at which RBI lends money to banks. An increase in the policy repo rate makes borrowing money more costly, and hence is expected to control inflation by reducing the money supply. MPC increased this rate from 4% in April 2022 to 4.4% in May 2022, to 4.9% in June 2022, to 5.4% in August 2022, and to 5.9% in September 2022.
Breaking down the Consumer Price Index and the Wholesale Price Index
Consumer Price Index (CPI) measures the general prices of goods and services such as food, clothing, and fuel over time. Retail inflation is calculated as the change in the CPI over a period of time. Goods and services such as petrol, food products, health, and education are considered for its calculation, which are assigned different weights (See Table 1). Between February 2022 and August 2022, the average annual inflation was 6.9%. The rise in prices of subcomponents of the CPI during this period is indicated in Table 2.
|
Table 1: Assigned weights for the calculation of CPI
Sources: MOSPI; PRS. |
Table 2: Average inflation of some CPI components
Sources: Database on Indian Economy, RBI; PRS. |
CPI is not the only index that measures inflation in an economy. The Wholesale Price Index (WPI) measures the wholesale prices of goods. A change in wholesale prices reflects wholesale inflation. Table 3 indicates the weights assigned to goods for calculating the WPI. Manufactured goods include metals, chemicals, food products, and textiles.
|
Primary articles (23%) include food articles, and crude petroleum and natural gas. Fuel and power (12%) include mineral oils, electricity, and coal. WPI has remained above 10% from April 2021 onwards. It reached an all-time high of 17% in May 2022. This was driven by the inflation in metals, kerosene and petroleum coke, fruits and vegetables, and palm oil. |
Table 3:Assigned weights for the
Sources: Ministry of Commerce and Industry; PRS. |
Why has WPI inflation been consistently above CPI inflation?
Movements in the WPI have an impact on the CPI. For almost a year and half, CPI inflation has remained below WPI inflation. However, as per the design of the indices, it is expected that CPI would remain above WPI, and that any increase in WPI would reflect in the CPI after a time lag. This is because retail prices include taxes (as a percentage of price), while wholesale prices do not. Additionally, some of the goods in WPI act as inputs in the goods considered in CPI. An increase in input prices would lead to higher retail prices after a time lag.
We discuss possible reasons for why CPI has remained below WPI for a year and a half.
Figure 2: Consumer Price Index and Wholesale Price Index
Sources: Database on Indian Economy, Reserve Bank of India; PRS.
Composition of indices
As indicated in Table 2 and 3, the composition of the two indices varies. For instance, prices of manufacture of basic metals, chemicals, and machinery grew at an average rate of 13% between February 2021 and September 2022. They contribute 7% to the WPI. These are input goods for producing final goods and services such as automobiles, which are included in the CPI. The rise in prices of transport vehicles, communication devices, fuel for transport, and housing (CPI components) rose by 6% during this period.
The Ministry of Finance has observed that wholesale prices did not feed into retail prices (from March 2021 onwards) as wholesalers absorbed the rising input costs and did not pass them on to retailers. In August 2022, it noted that as retail prices are rising now, the pass-through may occur.
