![](/images/main_logo.png)
In the last decade, the government has implemented several schemes to address issues related to urbanisation and aid the process of urban development. One of the schemes is the Smart Cities Mission, which intends to take advantage of the developments in information technology in developing the urban development strategy, across 100 cities. Last week the government announced the list of 9 new Smart Cities, taking the total to 99. In light of this, we look at the Smart Cities Mission and a few issues with it.
What is a Smart City?
The primary objective of the Mission is to develop cities that provide core infrastructure and give a decent quality of life to its citizens, a clean and sustainable environment, and apply ‘smart’ solutions.
However, the Mission document does not provide one definition of a Smart City. Instead it allows cities to come up with their own solutions of what they identify as a Smart City. The guidelines suggest that the core infrastructure elements in a Smart City will include: (i) adequate water supply, (ii) assured electricity supply, (iii) sanitation, including solid waste management, (iv) efficient urban mobility and public transport, (v) affordable housing, (vi) robust IT connectivity, and (vii) good governance. ‘Smart’ solutions may include (i) energy efficient buildings, (ii) electronic service delivery, (iii) intelligent traffic management, (iv) smart metering, (v) citizen engagement, etc.
How were the Smart Cities selected?
The Mission was introduced in the form of a competition, called the Smart City challenge. The first stage was in July 2015 when states nominated their cities for the competition. In August 2015, the Ministry of Urban Development selected 100 of those cities to participate in the competition. These cities were required to develop their smart city plans (SCPs) and compete against each other. The SCPs were evaluated on the basis of the solutions, the processes followed, the feasibility and cost effectiveness of the plans, and citizen engagement. Over the last 2 years, the Ministry has announced winner cities in batches. So far, 99 cities have been selected under the Mission.
What information do these SCPs contain?
The cities had to prepare their SCPs with two primary strategic components: (i) area-based development, and (ii) pan-city development. The area-based development would cover a particular area of the city, and could have either a redevelopment model, or be a completely new development. Pan-city development would envisage application of certain smart solutions across the city to the existing infrastructure.
Each city had to formulate its own concept, vision, mission and plan for a Smart City that was appropriate to its local context and resources. The Ministry of Urban Development provided technical assistance, through consultancy firms, to cities for helping them prepare these strategic documents.
How will the Mission be implemented?
The Mission will be implemented at the city level by a Special Purpose Vehicle (SPV). The SPV will plan, approve, release funds, implement, manage, monitor, and evaluate the Smart City development projects.
The SPV will be a limited company incorporated under the Companies Act, 2013 at the city-level. It will be chaired by the Collector/ Municipal Commissioner of the Urban Development Authority. The respective state and the Urban Local Body (ULB or municipality) will be the promoters in this company having 50:50 equity shareholding.
How are the Plans getting financed?
The Mission will be operated as a Centrally Sponsored Scheme. The central government will provide financial support of up to Rs 48,000 crore over five years, that is, an average of Rs 500 crore per city. The states and ULBs will have to contribute an equal amount. The central government allocated Rs 4,000 crore towards the Mission in the 2017-18 budget.
Since funding from the government will meet only a part of the funding required, the rest will have to be raised from other sources including: (i) states/ ULBs own resources from collection of user fees, land monetization, etc., (ii) innovative finance mechanisms such as municipal bonds, (iii) leverage borrowings from financial institutions (such as banks), and (iv) the private sector through Public Private Partnerships (PPPs).
The total cost of projects proposed under the various SCPs of the 90 winner cities is Rs 1.9 lakh crore. About 42% of this amount will come from central and state funding, 23% through private investments and PPPs, and 19% through convergence with other schemes (such as HRIDAY, AMRUT, Swachh Bharat-Urban). The remaining will be generated by the cities through the levy of local taxes, and user fees.
What are some of the issues to consider?
Financial capacity of cities: Under the Mission, cities have to generate additional revenue through various sources including market borrowings, PPPs, and land monetization. The High Powered Expert Committee on Indian Urban Infrastructure and Services (HPEC) had observed that ULBs in India are among the weakest in the world, both in terms of capacity to raise resources and financial autonomy. Even though ULBs have been getting higher allocations from the centre and states, and tax devolution to them has increased, their own tax bases are narrow. Further, owing to their poor governance and financial situation, ULBs find it difficult to access external financing.
Such a situation may pose problems when implementing the Mission, where the ULBs have to raise a significant share of the revenue through external sources (PPPs, market borrowings). For example, the Bhubaneswar Smart City Plan has a total project cost of Rs 4,537 crore (over five years), while the city’s annual budget for 2014-15 was Rs 469 crore.
In order to improve the finances of the ULBs, committees have made various recommendations, which include:
The government has recently introduced a few policies and mechanisms to address municipal financing. Examples include value capture financing through public investments in infrastructure projects, and a credit rating system for cities. In June 2017, the Pune Municipal Corporation raised Rs 200 crore by issuing municipal bonds.
Technical capacity of the ULBs: The Smart Cities Mission seeks to empower ULBs to raise their own revenue, and also lays emphasis on the capacity building of ULBs. The HPEC had observed that municipal administration has suffered due to: (i) presence of untrained and unskilled manpower, and (ii) shortage of qualified technical staff and managerial supervisors. It had recommended improving the technical capacity of ULBs by providing technical assistance to state governments, and ULBs in planning, financing, monitoring, and operation of urban programmes. The central government had allocated Rs 10.5 crore towards the capacity building component of the Mission in 2017-18.
The Ministry of Urban Development has been running several programmes to improve capacity of ULBs. This includes MoUs with 18 states to conduct training programmes for their ULB staff.
Coverage of the Mission: The Mission covers 100 cities, of which 99 have been announced as winners so far. The urban population that will be impacted through the Mission is around 96 million (data for 90 cities excluding the recently announced 9 cities).
As per Census 2011, India’s urban population was 377 million. The Mission impacts about 25% of this population. Further, most of the SCPs approved so far focus on area-based development, thus affecting a particular area of the cities. About 80% of the total project cost proposed is towards this model of development. In each city, this area-based development will cover up to 50 acres of area. The remaining 20% of the project cost is towards pan-city development proposals, which provide smart planning solutions for the entire city. It may be argued that even within the selected cities, the Mission will only impact few selected areas, and not necessarily help with development of the entire city.
Mr. Ramnath Kovind completes his tenure as President in July. With the Election Commission of India expected to notify the election dates this week, we look at how India will elect its next President.
As the Head of the State, the President is a key part of Parliament. The President calls the two Houses of Parliament into session on the advice of the Council of Ministers. A Bill passed by the Lok Sabha and Rajya Sabha does not become a law unless assented to by the President. Further, when Parliament is not in session, the President holds the power to sign a law with immediate effect through an Ordinance.
Who elects the President?
The manner of election of the President is provided in Article 55 of the Constitution. Members of Parliament and Members of Legislative Assemblies (MPs and MLAs) including elected representatives from the Union Territories (UTs) of Delhi and Puducherry form the electoral college, which elects the President. At least 50 elected representatives must propose a candidate, who must then be seconded by 50 other electors to run for the President's office. Members of Legislative Councils and the 12 nominated members of Rajya Sabha do not participate in the voting process.
The history behind having proposers and seconders To discourage the practice, candidates had to secure at least 10 proposers and seconders each to contest the elections from the 1974 election onwards. A compulsory security deposit of Rs 2,500 was also introduced. The changes were brought in through an amendment to the Presidential and Vice-Presidential Act, 1952. In 1997, the Act was further amended to increase the security deposit to Rs 15,000 and the minimum number of proposers and seconders to 50 each. |
How are the votes calculated?
The Presidential election uses a special voting to tally the votes. A different voting weightage is assigned to an MP and an MLA. The value of each MLA's vote is determined based on the population of their state and the number of MLAs. For instance, an MLA from UP has a value of 208 while an MLA from Sikkim has 7 (see Table 1). Due to a Constitutional Amendment passed in 2002, the population of the state as per the 1971 census is taken for the calculation.
The value of an MP's vote is the sum of all votes of MLAs across the country divided by the number of elected MPs.
How will the numbers look in 2022?
In the 2017 Presidential elections, electors from 31 states and the UTs of Delhi and Puducherry participated. However, in 2019, with the Jammu and Kashmir (J&K) Reorganization Act, the number of states were reduced to 30. The J&K Assembly was dissolved as per the Act and a new legislature for the UT of J&K is yet to be reconstituted. UTs with legislatures were not originally part of the electoral college for the election of the President. The Constitution was amended in 1992 to specifically include the UTs of Delhi and Puducherry. Note that for MLAs from J&K to participate in future Presidential elections, a similar Constitutional amendment would be required to be passed by Parliament.
Based on the assumption that J&K is not included in the 2022 Presidential election, the total number of votes of MLAs in 2022 elections will have to be adjusted. The 87 Jammu and Kashmir MLAs must be removed from the total number of MLAs of 4,120. Jammu and Kashmir’s contributing vote share of 6,264 must also be reduced from the total vote share of 549,495. Adjusting for these changes, 4,033 MLAs will participate in the 2022 elections and the combined vote share of all MLAs will add up to 543,231.
Table 1: The value of votes of elected MLAs of different states at the 2017 Presidential Election
Name of State |
Number of Assembly seats |
Population (1971 Census) |
Value of vote of each MLA |
Total value of votes for the state (B x D) |
A |
B |
C |
D |
E |
Andhra Pradesh |
175 |
2,78,00,586 |
159 |
27,825 |
Arunachal Pradesh |
60 |
4,67,511 |
8 |
480 |
Assam |
126 |
1,46,25,152 |
116 |
14,616 |
Bihar |
243 |
4,21,26,236 |
173 |
42,039 |
Chhattisgarh |
90 |
1,16,37,494 |
129 |
11,610 |
Goa |
40 |
7,95,120 |
20 |
800 |
Gujarat |
182 |
2,66,97,475 |
147 |
26,754 |
Haryana |
90 |
1,00,36,808 |
112 |
10,080 |
Himachal Pradesh |
68 |
34,60,434 |
51 |
3,468 |
Jammu and Kashmir |
87 |
63,00,000 |
72 |
6,264 |
Jharkhand |
81 |
1,42,27,133 |
176 |
14,256 |
Karnataka |
224 |
2,92,99,014 |
131 |
29,344 |
Kerala |
140 |
2,13,47,375 |
152 |
21,280 |
Madhya Pradesh |
230 |
3,00,16,625 |
131 |
30,130 |
Maharashtra |
288 |
5,04,12,235 |
175 |
50,400 |
Manipur |
60 |
10,72,753 |
18 |
1,080 |
Meghalaya |
60 |
10,11,699 |
17 |
1,020 |
Mizoram |
40 |
3,32,390 |
8 |
320 |
Nagaland |
60 |
5,16,449 |
9 |
540 |
Odisha |
147 |
2,19,44,615 |
149 |
21,903 |
Punjab |
117 |
1,35,51,060 |
116 |
13,572 |
Rajasthan |
200 |
2,57,65,806 |
129 |
25,800 |
Sikkim |
32 |
2,09,843 |
7 |
224 |
Tamil Nadu |
234 |
4,11,99,168 |
176 |
41,184 |
Telangana |
119 |
1,57,02,122 |
132 |
15,708 |
Tripura |
60 |
15,56,342 |
26 |
1,560 |
Uttarakhand |
70 |
44,91,239 |
64 |
4,480 |
Uttar Pradesh |
403 |
8,38,49,905 |
208 |
83,824 |
West Bengal |
294 |
4,43,12,011 |
151 |
44,394 |
NCT of Delhi |
70 |
40,65,698 |
58 |
4,060 |
Puducherry |
30 |
4,71,707 |
16 |
480 |
Total |
4,120 |
54,93,02,005 |
|
5,49,495 |
Source: Election Commission of India (2017); PRS.
The value of an MP’s vote correspondingly will change from 708 in 2017 to 700 in 2022.
Value of one MP's vote = Total value of all votes of MLAs = 543231 = 700
Total number of elected MPs 776
Note that the value of an MP’s vote is rounded off to the closest whole number. This brings the combined value of the votes of all MPs to 543,200 (700 x 776).
What is the number of votes required to win?
The voting for the Presidential elections is done through the system of single transferable vote. In this system, electors rank the candidates in the order of their preference. The winning candidate must secure more than half of the total value of valid votes to win the election. This is known as the quota.
Assuming that each elector casts his vote and that each vote is valid:
Quota = Total value of MP’s votes + Total value of MLA’s votes + 1
2
= 543200 + 543231 +1 = 1086431 +1 = 543,216
2 2
The anti-defection law which disallows MPs from crossing the party line does not apply to the Presidential election. This means that the MPs and MLAs can keep their ballot secret.
The counting of votes takes place in rounds. In Round 1, only the first preference marked on each ballot is counted. If any of the candidates secures the quota at this stage, he or she is declared the winner. If no candidate secures the quota in the first round, then another round of counting takes place. In this round, the votes cast to the candidate who secures the least number of votes in Round 1 are transferred. This means that these votes are now added to the second preference candidate marked on each ballot. This process is repeated till only one candidate remains. Note that it is not compulsory for an elector to mark his preference for all candidates. If no second preference is marked, then the ballots are treated as exhausted ballots in Round 2 and are not counted further.
The fifth Presidential election which elected Mr. VV Giri is the only instance when a candidate did not secure the quota in the first round. The second preference votes were then evaluated and Mr. Giri secured 4,20,077 of the 8,36,337 votes and was declared the President.
The only President of India to win unopposed |