In the last decade, the government has implemented several schemes to address issues related to urbanisation and aid the process of urban development. One of the schemes is the Smart Cities Mission, which intends to take advantage of the developments in information technology in developing the urban development strategy, across 100 cities. Last week the government announced the list of 9 new Smart Cities, taking the total to 99. In light of this, we look at the Smart Cities Mission and a few issues with it.
What is a Smart City?
The primary objective of the Mission is to develop cities that provide core infrastructure and give a decent quality of life to its citizens, a clean and sustainable environment, and apply ‘smart’ solutions.
However, the Mission document does not provide one definition of a Smart City. Instead it allows cities to come up with their own solutions of what they identify as a Smart City. The guidelines suggest that the core infrastructure elements in a Smart City will include: (i) adequate water supply, (ii) assured electricity supply, (iii) sanitation, including solid waste management, (iv) efficient urban mobility and public transport, (v) affordable housing, (vi) robust IT connectivity, and (vii) good governance. ‘Smart’ solutions may include (i) energy efficient buildings, (ii) electronic service delivery, (iii) intelligent traffic management, (iv) smart metering, (v) citizen engagement, etc.
How were the Smart Cities selected?
The Mission was introduced in the form of a competition, called the Smart City challenge. The first stage was in July 2015 when states nominated their cities for the competition. In August 2015, the Ministry of Urban Development selected 100 of those cities to participate in the competition. These cities were required to develop their smart city plans (SCPs) and compete against each other. The SCPs were evaluated on the basis of the solutions, the processes followed, the feasibility and cost effectiveness of the plans, and citizen engagement. Over the last 2 years, the Ministry has announced winner cities in batches. So far, 99 cities have been selected under the Mission.
What information do these SCPs contain?
The cities had to prepare their SCPs with two primary strategic components: (i) area-based development, and (ii) pan-city development. The area-based development would cover a particular area of the city, and could have either a redevelopment model, or be a completely new development. Pan-city development would envisage application of certain smart solutions across the city to the existing infrastructure.
Each city had to formulate its own concept, vision, mission and plan for a Smart City that was appropriate to its local context and resources. The Ministry of Urban Development provided technical assistance, through consultancy firms, to cities for helping them prepare these strategic documents.
How will the Mission be implemented?
The Mission will be implemented at the city level by a Special Purpose Vehicle (SPV). The SPV will plan, approve, release funds, implement, manage, monitor, and evaluate the Smart City development projects.
The SPV will be a limited company incorporated under the Companies Act, 2013 at the city-level. It will be chaired by the Collector/ Municipal Commissioner of the Urban Development Authority. The respective state and the Urban Local Body (ULB or municipality) will be the promoters in this company having 50:50 equity shareholding.
How are the Plans getting financed?
The Mission will be operated as a Centrally Sponsored Scheme. The central government will provide financial support of up to Rs 48,000 crore over five years, that is, an average of Rs 500 crore per city. The states and ULBs will have to contribute an equal amount. The central government allocated Rs 4,000 crore towards the Mission in the 2017-18 budget.
Since funding from the government will meet only a part of the funding required, the rest will have to be raised from other sources including: (i) states/ ULBs own resources from collection of user fees, land monetization, etc., (ii) innovative finance mechanisms such as municipal bonds, (iii) leverage borrowings from financial institutions (such as banks), and (iv) the private sector through Public Private Partnerships (PPPs).
The total cost of projects proposed under the various SCPs of the 90 winner cities is Rs 1.9 lakh crore. About 42% of this amount will come from central and state funding, 23% through private investments and PPPs, and 19% through convergence with other schemes (such as HRIDAY, AMRUT, Swachh Bharat-Urban). The remaining will be generated by the cities through the levy of local taxes, and user fees.
What are some of the issues to consider?
Financial capacity of cities: Under the Mission, cities have to generate additional revenue through various sources including market borrowings, PPPs, and land monetization. The High Powered Expert Committee on Indian Urban Infrastructure and Services (HPEC) had observed that ULBs in India are among the weakest in the world, both in terms of capacity to raise resources and financial autonomy. Even though ULBs have been getting higher allocations from the centre and states, and tax devolution to them has increased, their own tax bases are narrow. Further, owing to their poor governance and financial situation, ULBs find it difficult to access external financing.
Such a situation may pose problems when implementing the Mission, where the ULBs have to raise a significant share of the revenue through external sources (PPPs, market borrowings). For example, the Bhubaneswar Smart City Plan has a total project cost of Rs 4,537 crore (over five years), while the city’s annual budget for 2014-15 was Rs 469 crore.
In order to improve the finances of the ULBs, committees have made various recommendations, which include:
The government has recently introduced a few policies and mechanisms to address municipal financing. Examples include value capture financing through public investments in infrastructure projects, and a credit rating system for cities. In June 2017, the Pune Municipal Corporation raised Rs 200 crore by issuing municipal bonds.
Technical capacity of the ULBs: The Smart Cities Mission seeks to empower ULBs to raise their own revenue, and also lays emphasis on the capacity building of ULBs. The HPEC had observed that municipal administration has suffered due to: (i) presence of untrained and unskilled manpower, and (ii) shortage of qualified technical staff and managerial supervisors. It had recommended improving the technical capacity of ULBs by providing technical assistance to state governments, and ULBs in planning, financing, monitoring, and operation of urban programmes. The central government had allocated Rs 10.5 crore towards the capacity building component of the Mission in 2017-18.
The Ministry of Urban Development has been running several programmes to improve capacity of ULBs. This includes MoUs with 18 states to conduct training programmes for their ULB staff.
Coverage of the Mission: The Mission covers 100 cities, of which 99 have been announced as winners so far. The urban population that will be impacted through the Mission is around 96 million (data for 90 cities excluding the recently announced 9 cities).
As per Census 2011, India’s urban population was 377 million. The Mission impacts about 25% of this population. Further, most of the SCPs approved so far focus on area-based development, thus affecting a particular area of the cities. About 80% of the total project cost proposed is towards this model of development. In each city, this area-based development will cover up to 50 acres of area. The remaining 20% of the project cost is towards pan-city development proposals, which provide smart planning solutions for the entire city. It may be argued that even within the selected cities, the Mission will only impact few selected areas, and not necessarily help with development of the entire city.
The Governor of Rajasthan promulgated two Ordinances amending the Code of Criminal Procedure, 1973 and Indian Penal Code, 1860 applicable in Rajasthan on September 7. The Ordinances restrain any investigation to be conducted against a judge, magistrate or public servant without prior sanction of the government. The decision to grant sanction will have to be taken within six months, failing which such sanction will be deemed to have been granted. The Ordinances also restrain any person from reporting on the individual in question until sanction for investigation is granted. Two Bills replacing these Ordinances were introduced in the Rajasthan Assembly by the state Home Minister last week, on October 23.[i] After introduction, the Bills were referred to a 15-member select committee comprising of legislators from the state Assembly, and headed by the Home Minister of Rajasthan. This blog examines the role of committees and some of the practices observed in state legislatures.
Purpose of committees in legislatures
In India, state legislatures sit for 31 days a year on an average.* Several Bills are passed within a few days of their introduction. One of the primary responsibilities of the legislature is to hold the executive accountable, and examine potential laws. Due to paucity of time, it is difficult for the members go through all the bills and discuss them in detail. To address this issue, various committees are set up in Parliament and state assemblies where smaller group of members examine Bills in detail, and allow for an informed debate in the legislature. Apart from scrutinising legislation, committees also examine budgetary allocations for various departments and other policies of the government. These mini-legislatures provide a forum for law makers to develop expertise, engage with citizens and seek inputs from stakeholders. Since these committees consist of members from different parties, they provide a platform for building consensus on various issues.
Figure 1: Average sitting days in a year (2012-16)
Sources: Website of various state assemblies as on October 30, 2017.
Types of committees
There are broadly three types of committees: (i) Financial committees: These scrutinise the expenditure of the government and recommend efficient ways of spending funds (example: Public Accounts Committee and Estimates Committee), (ii) Department-Related Standing Committees (DRSC): These scrutinise performance of departments under a ministry, (iii) Other committees: These deal with day-to-day functioning of the legislature (example: Business Advisory Committee, Papers Laid, Rules, etc.) While there are 3 financial committees and 24 department related committees in Parliament, the number of committees in state legislatures varies. For example, Kerala has 14 subject committees examining all departments, while Delhi has seven standing committees scrutinising performance of various departments. [ii],[iii] However, not all states have a provision for specific DRSCs or subject committees.
Similar to Parliament, state legislatures also have a provision to form a select committee to examine a particular legislation or a subject. Such a committee is disbanded after it presents a report with its findings or recommendations. Several Bills in states are referred to select committees. However, the practice in some state legislatures with respect to select committees deviate from those in the Parliament.
Independence of select committee from the executive
The rules in several states provide for the minister in-charge piloting the bill to be an ex-officio member of the select committee. These states include Rajasthan, Assam, Andhra Pradesh, Chhattisgarh, Telangana. Moreover, in Manipur, the rules provide for the minister to be chairman of the select committee. Note that the minister is part of the executive. His inclusion in the committee may be in conflict with the committee’s role of scrutinising the functioning of the executive.
The practice of including ministers in committees is in contrast with the protocol followed in Parliament where a minister is not part of any DRSC or select committee. As committees of the legislature hold the executive accountable, having a minister on the select committee undermines the role of legislature as an oversight mechanism. A minister, as a representative of the executive being part of such committees may impede the ability of committees to effectively hold the executive accountable.
The two Bills introduced in the Rajasthan Assembly last week were referred to a select committee headed by the Home Minister of the state. There have been several instances in other state legislatures where the minister introducing a bill was chairman of the select committee examining it. In Goa, a bill empowering the government to acquire land for development of public services is headed by the Revenue Minister of the state.[iv] Similarly, in Arunachal Pradesh, the select committee examining a bill for establishment of a university was headed by the Education Minister.[v] In Maharashtra as well, the Education Minister was chairman of the select committee scrutinising a bill granting greater autonomy to state universities.[vi] For rigorous scrutiny of legislation, it is essential that the committees are independent of the executive.
Strengthening state legislature committees [vii]
The functioning of committees in states can be strengthened in various ways. Some of these include:
(i) Examination of Bills by assembly committees: In the absence of DRSCs, most bills are passed without detailed scrutiny while some bills are occasionally referred to select committees. In Parliament, bills pertaining to a certain ministry are referred to the respective DRSCs for scrutiny. To strengthen legislatures, DRSCs must examine all bills introduced in the assembly.
(ii) Scrutiny of budgets: Several states do not have DRSCs to examine budgetary proposals. Some states like Goa, Mizoram and Arunachal Pradesh have a budget committee to examine budget proposals. Post the 14th Finance commission, there is a higher devolution of funds to state governments from the centre. With states increasingly spending more, it is necessary for them to have DRSCs that scrutinise the allocations and expenditures to various departments before they are approved by state assemblies.
*Based on the average sitting days for 18 state assemblies from 2012-2016.
[i] The Code of Criminal Procedure (Rajasthan Amendment) Bill, 2017 http://www.rajassembly.nic.in/BillsPdf/Bill39-2017.pdf;The Criminal Laws (Rajasthan Amendment) Bill, 2017 http://www.rajassembly.nic.in/BillsPdf/Bill38-2017.pdf.
[ii] List of subject committees http://niyamasabha.org/codes/comm.htm.
[iii] Delhi Legislative Assembly National Capital Territory Of Delhi Composition Of House Committees
2017 – 2018, http://delhiassembly.nic.in/Committee/Committee_2017_2018.htm.
[iv] The Goa Requisition and Acquisition of Property Bill, 2017 http://www.goavidhansabha.gov.in/uploads/bills/468_draft_BN18OF2017-AI-REQUI.pdf.
[v] The Kameng Professional and Technical University Arunachal Pradesh Bill 2017 http://www.assamtribune.com/scripts/detailsnew.asp?id=oct1717/oth057.
[vi] Maharashtra Public Universities Bill, 2016 http://mls.org.in/pdf/university_bill_english.pdf.
[vii] Strengthening State Legislatures http://www.prsindia.org/uploads/media/Conference%202016/Strengthening%20State%20Legislatur
