In the last decade, the government has implemented several schemes to address issues related to urbanisation and aid the process of urban development.  One of the schemes is the Smart Cities Mission, which intends to take advantage of the developments in information technology in developing the urban development strategy, across 100 cities.  Last week the government announced the list of 9 new Smart Cities, taking the total to 99.  In light of this, we look at the Smart Cities Mission and a few issues with it.

What is a Smart City?

The primary objective of the Mission is to develop cities that provide core infrastructure and give a decent quality of life to its citizens, a clean and sustainable environment, and apply ‘smart’ solutions.

However, the Mission document does not provide one definition of a Smart City.  Instead it allows cities to come up with their own solutions of what they identify as a Smart City.  The guidelines suggest that the core infrastructure elements in a Smart City will include: (i) adequate water supply, (ii) assured electricity supply, (iii) sanitation, including solid waste management, (iv) efficient urban mobility and public transport, (v) affordable housing, (vi) robust IT connectivity, and (vii) good governance.  ‘Smart’ solutions may include (i) energy efficient buildings, (ii) electronic service delivery, (iii) intelligent traffic management, (iv) smart metering, (v) citizen engagement, etc.

How were the Smart Cities selected?

The Mission was introduced in the form of a competition, called the Smart City challenge.  The first stage was in July 2015 when states nominated their cities for the competition.  In August 2015, the Ministry of Urban Development selected 100 of those cities to participate in the competition.  These cities were required to develop their smart city plans (SCPs) and compete against each other.  The SCPs were evaluated on the basis of the solutions, the processes followed, the feasibility and cost effectiveness of the plans, and citizen engagement.  Over the last 2 years, the Ministry has announced winner cities in batches.  So far, 99 cities have been selected under the Mission.

What information do these SCPs contain?

The cities had to prepare their SCPs with two primary strategic components: (i) area-based development, and (ii) pan-city development.  The area-based development would cover a particular area of the city, and could have either a redevelopment model, or be a completely new development.  Pan-city development would envisage application of certain smart solutions across the city to the existing infrastructure.

Each city had to formulate its own concept, vision, mission and plan for a Smart City that was appropriate to its local context and resources.  The Ministry of Urban Development provided technical assistance, through consultancy firms, to cities for helping them prepare these strategic documents.

How will the Mission be implemented?

The Mission will be implemented at the city level by a Special Purpose Vehicle (SPV).  The SPV will plan, approve, release funds, implement, manage, monitor, and evaluate the Smart City development projects.

The SPV will be a limited company incorporated under the Companies Act, 2013 at the city-level.  It will be chaired by the Collector/ Municipal Commissioner of the Urban Development Authority.  The respective state and the Urban Local Body (ULB or municipality) will be the promoters in this company having 50:50 equity shareholding.

How are the Plans getting financed?

The Mission will be operated as a Centrally Sponsored Scheme.  The central government will provide financial support of up to Rs 48,000 crore over five years, that is, an average of Rs 500 crore per city.  The states and ULBs will have to contribute an equal amount.  The central government allocated Rs 4,000 crore towards the Mission in the 2017-18 budget.

Since funding from the government will meet only a part of the funding required, the rest will have to be raised from other sources including: (i) states/ ULBs own resources from collection of user fees, land monetization, etc., (ii) innovative finance mechanisms such as municipal bonds, (iii) leverage borrowings from financial institutions (such as banks), and (iv) the private sector through Public Private Partnerships (PPPs).

The total cost of projects proposed under the various SCPs of the 90 winner cities is Rs 1.9 lakh crore.  About 42% of this amount will come from central and state funding, 23% through private investments and PPPs, and 19% through convergence with other schemes (such as HRIDAY, AMRUT, Swachh Bharat-Urban).  The remaining will be generated by the cities through the levy of local taxes, and user fees.

What are some of the issues to consider?

Financial capacity of cities:  Under the Mission, cities have to generate additional revenue through various sources including market borrowings, PPPs, and land monetization.  The High Powered Expert Committee on Indian Urban Infrastructure and Services (HPEC) had observed that ULBs in India are among the weakest in the world, both in terms of capacity to raise resources and financial autonomy.  Even though ULBs have been getting higher allocations from the centre and states, and tax devolution to them has increased, their own tax bases are narrow.  Further, owing to their poor governance and financial situation, ULBs find it difficult to access external financing.

Such a situation may pose problems when implementing the Mission, where the ULBs have to raise a significant share of the revenue through external sources (PPPs, market borrowings).  For example, the Bhubaneswar Smart City Plan has a total project cost of Rs 4,537 crore (over five years), while the city’s annual budget for 2014-15 was Rs 469 crore.

In order to improve the finances of the ULBs, committees have made various recommendations, which include:

  • State governments make legislative changes to give more taxation powers and autonomy to ULBs for improving their revenue collections.
  • ULBs could raise their own revenue by tapping into land-based financing sources, and introducing reforms to strengthen non-tax revenues (such as water and sewerage charges, parking fees, etc.).
  • Municipal bonds may also be used as a source of revenue for ULBs.

The government has recently introduced a few policies and mechanisms to address municipal financing.  Examples include value capture financing through public investments in infrastructure projects, and a credit rating system for cities.  In June 2017, the Pune Municipal Corporation raised Rs 200 crore by issuing municipal bonds.

Technical capacity of the ULBs:  The Smart Cities Mission seeks to empower ULBs to raise their own revenue, and also lays emphasis on the capacity building of ULBs.  The HPEC had observed that municipal administration has suffered due to: (i) presence of untrained and unskilled manpower, and (ii) shortage of qualified technical staff and managerial supervisors.  It had recommended improving the technical capacity of ULBs by providing technical assistance to state governments, and ULBs in planning, financing, monitoring, and operation of urban programmes.  The central government had allocated Rs 10.5 crore towards the capacity building component of the Mission in 2017-18.

The Ministry of Urban Development has been running several programmes to improve capacity of ULBs.  This includes MoUs with 18 states to conduct training programmes for their ULB staff.

Coverage of the Mission:  The Mission covers 100 cities, of which 99 have been announced as winners so far.   The urban population that will be impacted through the Mission is around 96 million (data for 90 cities excluding the recently announced 9 cities).

As per Census 2011, India’s urban population was 377 million.  The Mission impacts about 25% of this population.  Further, most of the SCPs approved so far focus on area-based development, thus affecting a particular area of the cities.  About 80% of the total project cost proposed is towards this model of development.  In each city, this area-based development will cover up to 50 acres of area.  The remaining 20% of the project cost is towards pan-city development proposals, which provide smart planning solutions for the entire city.  It may be argued that even within the selected cities, the Mission will only impact few selected areas, and not necessarily help with development of the entire city.

At noon today, the Finance Minister introduced a Bill in Parliament to address the issue of delayed debt recovery.  The Bill  amends four laws including the SARFAESI Act and the DRT Act, which are primarily used for recovery of outstanding loans.  In this context, we examine the rise in NPAs in India and ways in which this may be dealt with.

I. An overview of Non-Performing Assets in India 

Banks give loans and advances to borrowers which may be categorised as: (i) standard asset (any loan which has not defaulted in repayment) or (ii) non-performing asset (NPA), based on their performance.  NPAs are loans and advances given by banks, on which the borrower has ceased to pay interest and principal repayments. Graph for blog In recent years, the gross NPAs of banks have increased from 2.3% of total loans in 2008 to 4.3% in 2015 (see Figure 1 alongside*).  The increase in NPAs may be due to various reasons, including slow growth in domestic market and drop in prices of commodities in the global markets.  In addition, exports of products such as steel, textiles, leather and gems have slowed down.[i] The increase in NPAs affects the credit market in the country.  This is due to the impact that non-repayment of loans has on the cash flow of banks and the availability of funds with them.[ii]  Additionally, a rising trend in NPAs may also make banks unwilling to lend.  This could be because there are lesser chances of debt recovery due to prevailing market conditions.[iii]  For example, banks may be unwilling to lend to the steel sector if companies in this sector are making losses and defaulting on current loans. There are various legislative mechanisms available with banks for debt recovery.  These include: (i) Recovery of Debt Due to Banks and Financial Institutions Act, 1993 (DRT Act) and (ii) Securitisation and Reconstruction of Financial Assets and Security Interest Act, 2002 (SARFAESI Act).  The Debt Recovery Tribunals established under DRT Act allow banks to recover outstanding loans.  The SARFAESI Act allows a secured creditor to enforce his security interest without the intervention of courts or tribunals.  In addition to these, there are voluntary mechanisms such as Corporate Debt Restructuring and Strategic Debt Restructuring, which   These mechanisms allow banks to collectively restructure debt of borrowers (which includes changing repayment schedule of loans) and take over the management of a company.

II. Challenges and recommendations for reform

In recent years, several committees have given recommendations on NPAs. We discuss these below.

Action against defaulters: Wilful default refers to a situation where a borrower defaults on the repayment of a loan, despite having adequate resources. As of December 2015, the public sector banks had 7,686 wilful defaulters, which accounted for Rs 66,000 crore of outstanding loans.[iv]  The Standing Committee of Finance, in February 2016, observed that 21% of the total NPAs of banks were from wilful defaulters.  It recommended that the names of top 30 wilful defaulters of every bank be made public.  It noted that making such information publicly available would act as a deterrent for others.

Asset Reconstruction Companies (ARCs): ARCs purchase stressed assets from banks, and try to recover them. The ARCs buy NPAs from banks at a discount and try to recover the money.  The Standing Committee observed that the prolonged slowdown in the economy had made it difficult for ARCs to absorb NPAs. Therefore, it recommended that the RBI should allow banks to absorb their written-off assets in a staggered manner.  This would help them in gradually restoring their balance sheets to normal health.

Improved recovery: The process of recovering outstanding loans is time consuming. This includes time taken to resolve insolvency, which is a situation where a borrower is unable to repay his outstanding debt.  The inability to resolve insolvency is one of the factors that impacts NPAS, the credit market, and affects the flow of money in the country.[v]  As of 2015, it took over four years to resolve insolvency in India.  This was higher than other countries such as the UK (1 year) and USA (1.5 years).  The Insolvency and Bankruptcy Code seeks to address this situation.  The Code, which was passed by Lok Sabha on May 5, 2016, is currently pending in Rajya Sabha. It provides a 180-day period to resolve insolvency (which includes change in repayment schedule of loans to recover outstanding loans.)  If insolvency is not resolved within this time period, the company will go in for liquidation of its assets, and the creditors will be repaid from these sale proceeds.


  [i] ‘Non-Performing Assets of Financial Institutions’, 27th Report of the Department-related Standing Committee on Finance, http://164.100.47.134/lsscommittee/Finance/16_Finance_27.pdf. [ii] Bankruptcy Law Reforms Committee, November 2015, http://finmin.nic.in/reports/BLRCReportVol1_04112015.pdf. [iii] Volume 2, Economic Survey 2015-16, http://indiabudget.nic.in/es2015-16/echapter-vol2.pdf. [iv] Starred Question No. 17, Rajya Sabha, Answered on April 26, Ministry of Finance. [v] Report of the Bankruptcy Law Reforms Committee, Ministry of Finance, November 2015, http://finmin.nic.in/reports/BLRCReportVol1_04112015.pdf. *Source:  ‘Non-Performing Assets of Financial Institutions’, 27th Report of the Department-related Standing Committee on Finance, http://164.100.47.134/lsscommittee/Finance/16_Finance_27.pdf; PRS.