In the last decade, the government has implemented several schemes to address issues related to urbanisation and aid the process of urban development. One of the schemes is the Smart Cities Mission, which intends to take advantage of the developments in information technology in developing the urban development strategy, across 100 cities. Last week the government announced the list of 9 new Smart Cities, taking the total to 99. In light of this, we look at the Smart Cities Mission and a few issues with it.
What is a Smart City?
The primary objective of the Mission is to develop cities that provide core infrastructure and give a decent quality of life to its citizens, a clean and sustainable environment, and apply ‘smart’ solutions.
However, the Mission document does not provide one definition of a Smart City. Instead it allows cities to come up with their own solutions of what they identify as a Smart City. The guidelines suggest that the core infrastructure elements in a Smart City will include: (i) adequate water supply, (ii) assured electricity supply, (iii) sanitation, including solid waste management, (iv) efficient urban mobility and public transport, (v) affordable housing, (vi) robust IT connectivity, and (vii) good governance. ‘Smart’ solutions may include (i) energy efficient buildings, (ii) electronic service delivery, (iii) intelligent traffic management, (iv) smart metering, (v) citizen engagement, etc.
How were the Smart Cities selected?
The Mission was introduced in the form of a competition, called the Smart City challenge. The first stage was in July 2015 when states nominated their cities for the competition. In August 2015, the Ministry of Urban Development selected 100 of those cities to participate in the competition. These cities were required to develop their smart city plans (SCPs) and compete against each other. The SCPs were evaluated on the basis of the solutions, the processes followed, the feasibility and cost effectiveness of the plans, and citizen engagement. Over the last 2 years, the Ministry has announced winner cities in batches. So far, 99 cities have been selected under the Mission.
What information do these SCPs contain?
The cities had to prepare their SCPs with two primary strategic components: (i) area-based development, and (ii) pan-city development. The area-based development would cover a particular area of the city, and could have either a redevelopment model, or be a completely new development. Pan-city development would envisage application of certain smart solutions across the city to the existing infrastructure.
Each city had to formulate its own concept, vision, mission and plan for a Smart City that was appropriate to its local context and resources. The Ministry of Urban Development provided technical assistance, through consultancy firms, to cities for helping them prepare these strategic documents.
How will the Mission be implemented?
The Mission will be implemented at the city level by a Special Purpose Vehicle (SPV). The SPV will plan, approve, release funds, implement, manage, monitor, and evaluate the Smart City development projects.
The SPV will be a limited company incorporated under the Companies Act, 2013 at the city-level. It will be chaired by the Collector/ Municipal Commissioner of the Urban Development Authority. The respective state and the Urban Local Body (ULB or municipality) will be the promoters in this company having 50:50 equity shareholding.
How are the Plans getting financed?
The Mission will be operated as a Centrally Sponsored Scheme. The central government will provide financial support of up to Rs 48,000 crore over five years, that is, an average of Rs 500 crore per city. The states and ULBs will have to contribute an equal amount. The central government allocated Rs 4,000 crore towards the Mission in the 2017-18 budget.
Since funding from the government will meet only a part of the funding required, the rest will have to be raised from other sources including: (i) states/ ULBs own resources from collection of user fees, land monetization, etc., (ii) innovative finance mechanisms such as municipal bonds, (iii) leverage borrowings from financial institutions (such as banks), and (iv) the private sector through Public Private Partnerships (PPPs).
The total cost of projects proposed under the various SCPs of the 90 winner cities is Rs 1.9 lakh crore. About 42% of this amount will come from central and state funding, 23% through private investments and PPPs, and 19% through convergence with other schemes (such as HRIDAY, AMRUT, Swachh Bharat-Urban). The remaining will be generated by the cities through the levy of local taxes, and user fees.
What are some of the issues to consider?
Financial capacity of cities: Under the Mission, cities have to generate additional revenue through various sources including market borrowings, PPPs, and land monetization. The High Powered Expert Committee on Indian Urban Infrastructure and Services (HPEC) had observed that ULBs in India are among the weakest in the world, both in terms of capacity to raise resources and financial autonomy. Even though ULBs have been getting higher allocations from the centre and states, and tax devolution to them has increased, their own tax bases are narrow. Further, owing to their poor governance and financial situation, ULBs find it difficult to access external financing.
Such a situation may pose problems when implementing the Mission, where the ULBs have to raise a significant share of the revenue through external sources (PPPs, market borrowings). For example, the Bhubaneswar Smart City Plan has a total project cost of Rs 4,537 crore (over five years), while the city’s annual budget for 2014-15 was Rs 469 crore.
In order to improve the finances of the ULBs, committees have made various recommendations, which include:
The government has recently introduced a few policies and mechanisms to address municipal financing. Examples include value capture financing through public investments in infrastructure projects, and a credit rating system for cities. In June 2017, the Pune Municipal Corporation raised Rs 200 crore by issuing municipal bonds.
Technical capacity of the ULBs: The Smart Cities Mission seeks to empower ULBs to raise their own revenue, and also lays emphasis on the capacity building of ULBs. The HPEC had observed that municipal administration has suffered due to: (i) presence of untrained and unskilled manpower, and (ii) shortage of qualified technical staff and managerial supervisors. It had recommended improving the technical capacity of ULBs by providing technical assistance to state governments, and ULBs in planning, financing, monitoring, and operation of urban programmes. The central government had allocated Rs 10.5 crore towards the capacity building component of the Mission in 2017-18.
The Ministry of Urban Development has been running several programmes to improve capacity of ULBs. This includes MoUs with 18 states to conduct training programmes for their ULB staff.
Coverage of the Mission: The Mission covers 100 cities, of which 99 have been announced as winners so far. The urban population that will be impacted through the Mission is around 96 million (data for 90 cities excluding the recently announced 9 cities).
As per Census 2011, India’s urban population was 377 million. The Mission impacts about 25% of this population. Further, most of the SCPs approved so far focus on area-based development, thus affecting a particular area of the cities. About 80% of the total project cost proposed is towards this model of development. In each city, this area-based development will cover up to 50 acres of area. The remaining 20% of the project cost is towards pan-city development proposals, which provide smart planning solutions for the entire city. It may be argued that even within the selected cities, the Mission will only impact few selected areas, and not necessarily help with development of the entire city.
Recently, the government announced that it plans to transfer benefits under various schemes directly into the bank accounts of individual beneficiaries. Benefits can be the Mahatma Gandhi National Rural Employment Guarantee Scheme (MNREGS) wages, scholarships, pensions and health benefits. Beneficiaries shall be identified through the Aadhaar number (Aadhaar is an individual identification number linked to a person’s demographic and biometric information). The direct cash transfer (DCT) system is going to be rolled out in 51 districts, starting January 1, 2013. It will later be extended to 18 states by April 1, 2013 and the rest by April 1, 2014 (or earlier). Presently, 34 schemes have been identified in 43 districts to implement the DCT programme. Currently, the government subsidises certain products (food grains, fertilizers, water, electricity) and services (education, healthcare) by providing them at a lower than market price to the beneficiaries. This has led to problems such as high fiscal deficit, waste of scarce resources and operational inefficiencies. The government is considering replacing this with an Aadhaar enabled DCT system. It has claimed that the new system would ensure timely payment directly to intended beneficiaries, reduce transaction costs and leakages. However, many experts have criticised both the concept of cash transfer as well as Aadhaar (see here, here, here and here). In this blog, we provide some background information about cash transfer, explain the concept of Aadhaar and examine the pros and cons of an Aadhaar enabled direct cash transfer system. Background on cash transfer Under the direct cash transfer (DCT) scheme, government subsidies will be given directly to the beneficiaries in the form of cash rather than goods. DCTs can either be unconditional or conditional. Under unconditional schemes, cash is directly transferred to eligible households with no conditions. For example, pension schemes. Conditional cash transfers provide cash directly to poor households in response to the fulfillment of certain conditions such as minimum attendance of children in schools. DCTs provide poor families the choice of using the cash as they wish. Having access to cash also relieves some of their financial constraints. Also, DCTs are simpler in design than other subsidy schemes. Even though cash transfer schemes have a high fixed cost of administration when the programme is set up, running costs are far lower (see here, here and here). Presently, the government operates a number of DCT schemes. For example, Janani Suraksha Yojana, Indira Awas Yojana and Dhanalaksmi scheme. In his 2011-12 Budget speech, the then Finance Minister, Pranab Mukherjee, had stated that the government plans to move towards direct transfer of cash subsidy for kerosene, Liquified Petroleum Gas (LPG), and fertilizers. A task force headed by Nandan Nilekani was set up to work out the modalities of operationalising DCT for these items. This task force submitted its report in February 2012. The National Food Security Bill, 2011, pending in Parliament, includes cash transfer and food coupons as possible alternative mechanisms to the Public Distribution System. Key features of Aadhaar The office of Unique Identification Authority of India (UIDAI) was set up in 2009 within the Planning Commission. In 2010, the government later introduced the National Identification Authority of India Bill in Parliament to give statutory status to this office.
For a PRS analysis of the Bill, see here. Aadhaar enabled direct cash transfers Advantages Identification through Aadhaar number: Currently, the recipient has to establish his identity and eligibility many times by producing multiple documents for verification. The verification of such documents is done by multiple authorities. An Aadhaar enabled bank account can be used by the beneficiary to receive multiple welfare payments as opposed to the one scheme, one bank approach, followed by a number of state governments. Elimination of middlemen: The scheme reduces chances of rent-seeking by middlemen who siphon off part of the subsidy. In the new system, the cash shall be transferred directly to individual bank accounts and the beneficiaries shall be identified through Aadhaar. Reduction in duplicate and ghost beneficiaries: The Aadhaar number is likely to help eliminate duplicate cards and cards for non-existent persons or ghost beneficiaries in schemes such as the PDS and MNREGS. Disadvantages Lack of clarity on whether Aadhaar is mandatory: According to UIDAI, it is not mandatory for individuals to get an Aadhaar number. However, it does not prevent any service provider from prescribing Aadhaar as a mandatory requirement for availing services. Therefore, beneficiaries may be denied a service if he does not have the Aadhaar number. It is noteworthy that the new direct cash transfer policy requires beneficiaries to have an Aadhaar number and a bank account. However, many beneficiaries do not yet have either. (Presently, there are 229 million Aadhaar number holders and 147 million bank accounts). Targeting and identification of beneficiaries: According to the government, one of the key reasons for changing to DCT system is to ensure better targeting of subsidies. However, the success of Aadhaar in weeding out ‘ghost’ beneficiaries depends on mandatory enrollment. If enrollment is not mandatory, both authentication systems (identity card based and Aadhaar based) must coexist. In such a scenario, ‘ghost’ beneficiaries and people with multiple cards will choose to opt out of the Aadhaar system. Furthermore, key schemes such as PDS suffer from large inclusion and exclusion errors. However, Aadhaar cannot address errors in targeting of BPL families. Also, it cannot address problems of MNREGS such as incorrect measurement of work and payment delays. Safeguard for maintaining privacy: Information collected when issuing Aadhaar may be misused if safeguards to maintain privacy are inadequate. Though the Supreme Court has included privacy as part of the Right to Life, India does not have a specific law governing issues related to privacy. Also, the authority is required to maintain details of every request for authentication and the response provided. However, maximum duration for which such data has to be stored is not specified. Authentication data provides insights into usage patterns of an Aadhaar number holder. Data that has been recorded over a long duration of time may be misused for activities such as profiling an individual’s behaviour.
