In the last decade, the government has implemented several schemes to address issues related to urbanisation and aid the process of urban development. One of the schemes is the Smart Cities Mission, which intends to take advantage of the developments in information technology in developing the urban development strategy, across 100 cities. Last week the government announced the list of 9 new Smart Cities, taking the total to 99. In light of this, we look at the Smart Cities Mission and a few issues with it.
What is a Smart City?
The primary objective of the Mission is to develop cities that provide core infrastructure and give a decent quality of life to its citizens, a clean and sustainable environment, and apply ‘smart’ solutions.
However, the Mission document does not provide one definition of a Smart City. Instead it allows cities to come up with their own solutions of what they identify as a Smart City. The guidelines suggest that the core infrastructure elements in a Smart City will include: (i) adequate water supply, (ii) assured electricity supply, (iii) sanitation, including solid waste management, (iv) efficient urban mobility and public transport, (v) affordable housing, (vi) robust IT connectivity, and (vii) good governance. ‘Smart’ solutions may include (i) energy efficient buildings, (ii) electronic service delivery, (iii) intelligent traffic management, (iv) smart metering, (v) citizen engagement, etc.
How were the Smart Cities selected?
The Mission was introduced in the form of a competition, called the Smart City challenge. The first stage was in July 2015 when states nominated their cities for the competition. In August 2015, the Ministry of Urban Development selected 100 of those cities to participate in the competition. These cities were required to develop their smart city plans (SCPs) and compete against each other. The SCPs were evaluated on the basis of the solutions, the processes followed, the feasibility and cost effectiveness of the plans, and citizen engagement. Over the last 2 years, the Ministry has announced winner cities in batches. So far, 99 cities have been selected under the Mission.
What information do these SCPs contain?
The cities had to prepare their SCPs with two primary strategic components: (i) area-based development, and (ii) pan-city development. The area-based development would cover a particular area of the city, and could have either a redevelopment model, or be a completely new development. Pan-city development would envisage application of certain smart solutions across the city to the existing infrastructure.
Each city had to formulate its own concept, vision, mission and plan for a Smart City that was appropriate to its local context and resources. The Ministry of Urban Development provided technical assistance, through consultancy firms, to cities for helping them prepare these strategic documents.
How will the Mission be implemented?
The Mission will be implemented at the city level by a Special Purpose Vehicle (SPV). The SPV will plan, approve, release funds, implement, manage, monitor, and evaluate the Smart City development projects.
The SPV will be a limited company incorporated under the Companies Act, 2013 at the city-level. It will be chaired by the Collector/ Municipal Commissioner of the Urban Development Authority. The respective state and the Urban Local Body (ULB or municipality) will be the promoters in this company having 50:50 equity shareholding.
How are the Plans getting financed?
The Mission will be operated as a Centrally Sponsored Scheme. The central government will provide financial support of up to Rs 48,000 crore over five years, that is, an average of Rs 500 crore per city. The states and ULBs will have to contribute an equal amount. The central government allocated Rs 4,000 crore towards the Mission in the 2017-18 budget.
Since funding from the government will meet only a part of the funding required, the rest will have to be raised from other sources including: (i) states/ ULBs own resources from collection of user fees, land monetization, etc., (ii) innovative finance mechanisms such as municipal bonds, (iii) leverage borrowings from financial institutions (such as banks), and (iv) the private sector through Public Private Partnerships (PPPs).
The total cost of projects proposed under the various SCPs of the 90 winner cities is Rs 1.9 lakh crore. About 42% of this amount will come from central and state funding, 23% through private investments and PPPs, and 19% through convergence with other schemes (such as HRIDAY, AMRUT, Swachh Bharat-Urban). The remaining will be generated by the cities through the levy of local taxes, and user fees.
What are some of the issues to consider?
Financial capacity of cities: Under the Mission, cities have to generate additional revenue through various sources including market borrowings, PPPs, and land monetization. The High Powered Expert Committee on Indian Urban Infrastructure and Services (HPEC) had observed that ULBs in India are among the weakest in the world, both in terms of capacity to raise resources and financial autonomy. Even though ULBs have been getting higher allocations from the centre and states, and tax devolution to them has increased, their own tax bases are narrow. Further, owing to their poor governance and financial situation, ULBs find it difficult to access external financing.
Such a situation may pose problems when implementing the Mission, where the ULBs have to raise a significant share of the revenue through external sources (PPPs, market borrowings). For example, the Bhubaneswar Smart City Plan has a total project cost of Rs 4,537 crore (over five years), while the city’s annual budget for 2014-15 was Rs 469 crore.
In order to improve the finances of the ULBs, committees have made various recommendations, which include:
The government has recently introduced a few policies and mechanisms to address municipal financing. Examples include value capture financing through public investments in infrastructure projects, and a credit rating system for cities. In June 2017, the Pune Municipal Corporation raised Rs 200 crore by issuing municipal bonds.
Technical capacity of the ULBs: The Smart Cities Mission seeks to empower ULBs to raise their own revenue, and also lays emphasis on the capacity building of ULBs. The HPEC had observed that municipal administration has suffered due to: (i) presence of untrained and unskilled manpower, and (ii) shortage of qualified technical staff and managerial supervisors. It had recommended improving the technical capacity of ULBs by providing technical assistance to state governments, and ULBs in planning, financing, monitoring, and operation of urban programmes. The central government had allocated Rs 10.5 crore towards the capacity building component of the Mission in 2017-18.
The Ministry of Urban Development has been running several programmes to improve capacity of ULBs. This includes MoUs with 18 states to conduct training programmes for their ULB staff.
Coverage of the Mission: The Mission covers 100 cities, of which 99 have been announced as winners so far. The urban population that will be impacted through the Mission is around 96 million (data for 90 cities excluding the recently announced 9 cities).
As per Census 2011, India’s urban population was 377 million. The Mission impacts about 25% of this population. Further, most of the SCPs approved so far focus on area-based development, thus affecting a particular area of the cities. About 80% of the total project cost proposed is towards this model of development. In each city, this area-based development will cover up to 50 acres of area. The remaining 20% of the project cost is towards pan-city development proposals, which provide smart planning solutions for the entire city. It may be argued that even within the selected cities, the Mission will only impact few selected areas, and not necessarily help with development of the entire city.
Minimum Support Price (MSP) is the assured price at which foodgrains are procured from farmers by the central and state governments and their agencies, for the central pool of foodgrains. The central pool is used for providing foodgrains under the Public Distribution System (PDS) and other welfare schemes, and also kept as reserve in the form of buffer stock. However, in the past few months, there have been demands to extend MSP to private trade as well and guarantee MSP to farmers on all kinds of trade. This blogpost looks at the state of public procurement of foodgrains in India and the provision of MSP.
Is MSP applicable for all crops?
The central government notifies MSP for 23 crops every year before the Kharif and Rabi seasons based on the recommendations of the Commission for Agricultural Costs and Prices, an attached office of the Ministry of Agriculture and Farmers’ Welfare. These crops include foodgrains such as cereals, coarse grains, and pulses. However, public procurement is largely limited to a few foodgrains such as paddy (rice), wheat, and, to a limited extent, pulses (Figure 1).
Figure 1: Percentage of crop production that was procured at MSP in 2019-20
Sources: Unstarred Question No. 331, Lok Sabha, September 15, 2020; PRS.
Since rice and wheat are the primary foodgrains distributed under PDS and stored for food security, their procurement level is considerably high. However, the National Food Security Act, 2013 requires the central and state governments to progressively undertake necessary reforms in PDS. One of the reforms requires them to diversify the commodities distributed under PDS over a period of time.
How does procurement vary across states?
The procurement of foodgrains is largely concentrated in a few states. Three states (Madhya Pradesh, Punjab, and Haryana) producing 46% of the wheat in the country account for 85% of its procurement (Figure 2). For rice, six states (Punjab, Telangana, Andhra Pradesh, Chhattisgarh, Odisha, and Haryana) with 40% of the production have 74% share in procurement (Figure 3). The National Food Security Act, 2013 requires the central, state, and local governments to strive to progressively realise certain objectives for advancing food and nutritional security. One of these objectives involves geographical diversification of the procurement operations.
Figure 2: 85% wheat procurement is from three states (2019-20)
Sources: Department of Food and Public Distribution; PRS.
Figure 3: 76% of the rice procured comes from six states (2019-20)
Sources: Department of Food and Public Distribution; PRS.
Is MSP mandatory for private trade as well in some states?
MSP is not mandatory for purchase of foodgrains by private traders or companies. It acts as a reference price at which the government and its agencies procure certain foodgrains from farmers.
In September 2020, the central government enacted a new farm law which allows anyone with a PAN card to buy farmers’ produce in the ‘trade area’ outside the markets notified or run by the state Agricultural Produce Marketing Committees (APMCs). Buyers do not need to get a license from the state government or APMC, or pay any tax to them for such purchase in the ‘trade area’. These changes in regulations raised concerns regarding the kind of protections available to farmers in the ‘trade area’ outside APMC markets, particularly in terms of the price discovery and payment. In October 2020, Punjab passed a Bill in response to the central farm law to prohibit purchase of paddy and wheat below MSP. Any person or company compelling or pressurising farmers to sell below MSP will be punished with a minimum of three-year imprisonment and a fine. Note that 72% of the wheat and 92% of the rice produced in Punjab was purchased under public procurement in 2019-20.
Similarly, in November 2020, Rajasthan passed a Bill to declare those contract farming agreements as invalid where the purchase is done below MSP. Any person or company compelling or pressurising farmers to enter into such an invalid contract will be punished with 3 to 7 years of imprisonment, or a fine of minimum five lakh rupees, or both. Both these Bills have not been enacted yet as they are awaiting the Governors’ assent.
How has MSP affected the cropping pattern?
According to the central government’s procurement policy, the objective of public procurement is to ensure that farmers get remunerative prices for their produce and do not have to resort to distress sale. If farmers get a better price in comparison to MSP, they are free to sell their produce in the open market. The Economic Survey 2019-20 observed that the regular increase in MSP is seen by farmers as a signal to opt for crops which have an assured procurement system (for example, rice and wheat). The Economic Survey also noted that this indicates market prices do not offer remunerative options for farmers, and MSP has, in effect, become the maximum price that the farmers are able to realise.
Thus, MSP incentivises farmers to grow crops which are procured by the government. As wheat and rice are major food grains provided under the PDS, the focus of procurement is on these crops. This skews the production of crops in favour of wheat and paddy (particularly in states where procurement levels are high), and does not offer an incentive for farmers to produce other items such as pulses. Further, this puts pressure on the water table as these crops are water-intensive crops.
To encourage crop diversification and thereby reduce the consumption of water, some state governments are taking measures to incentivise farmers to shift away from paddy and wheat. For example, Haryana has launched a scheme in 2020 to provide Rs 7,000 per acre to those farmers who will use more than 50% of their paddy area (as per the area sown in 2019-20) for other crops. The farmers can grow maize, bajra, pulses, or cotton in such diversified area. Further, the crop produce grown in such diversified area under the scheme will be procured by the state government at MSP.
