In the last decade, the government has implemented several schemes to address issues related to urbanisation and aid the process of urban development. One of the schemes is the Smart Cities Mission, which intends to take advantage of the developments in information technology in developing the urban development strategy, across 100 cities. Last week the government announced the list of 9 new Smart Cities, taking the total to 99. In light of this, we look at the Smart Cities Mission and a few issues with it.
What is a Smart City?
The primary objective of the Mission is to develop cities that provide core infrastructure and give a decent quality of life to its citizens, a clean and sustainable environment, and apply ‘smart’ solutions.
However, the Mission document does not provide one definition of a Smart City. Instead it allows cities to come up with their own solutions of what they identify as a Smart City. The guidelines suggest that the core infrastructure elements in a Smart City will include: (i) adequate water supply, (ii) assured electricity supply, (iii) sanitation, including solid waste management, (iv) efficient urban mobility and public transport, (v) affordable housing, (vi) robust IT connectivity, and (vii) good governance. ‘Smart’ solutions may include (i) energy efficient buildings, (ii) electronic service delivery, (iii) intelligent traffic management, (iv) smart metering, (v) citizen engagement, etc.
How were the Smart Cities selected?
The Mission was introduced in the form of a competition, called the Smart City challenge. The first stage was in July 2015 when states nominated their cities for the competition. In August 2015, the Ministry of Urban Development selected 100 of those cities to participate in the competition. These cities were required to develop their smart city plans (SCPs) and compete against each other. The SCPs were evaluated on the basis of the solutions, the processes followed, the feasibility and cost effectiveness of the plans, and citizen engagement. Over the last 2 years, the Ministry has announced winner cities in batches. So far, 99 cities have been selected under the Mission.
What information do these SCPs contain?
The cities had to prepare their SCPs with two primary strategic components: (i) area-based development, and (ii) pan-city development. The area-based development would cover a particular area of the city, and could have either a redevelopment model, or be a completely new development. Pan-city development would envisage application of certain smart solutions across the city to the existing infrastructure.
Each city had to formulate its own concept, vision, mission and plan for a Smart City that was appropriate to its local context and resources. The Ministry of Urban Development provided technical assistance, through consultancy firms, to cities for helping them prepare these strategic documents.
How will the Mission be implemented?
The Mission will be implemented at the city level by a Special Purpose Vehicle (SPV). The SPV will plan, approve, release funds, implement, manage, monitor, and evaluate the Smart City development projects.
The SPV will be a limited company incorporated under the Companies Act, 2013 at the city-level. It will be chaired by the Collector/ Municipal Commissioner of the Urban Development Authority. The respective state and the Urban Local Body (ULB or municipality) will be the promoters in this company having 50:50 equity shareholding.
How are the Plans getting financed?
The Mission will be operated as a Centrally Sponsored Scheme. The central government will provide financial support of up to Rs 48,000 crore over five years, that is, an average of Rs 500 crore per city. The states and ULBs will have to contribute an equal amount. The central government allocated Rs 4,000 crore towards the Mission in the 2017-18 budget.
Since funding from the government will meet only a part of the funding required, the rest will have to be raised from other sources including: (i) states/ ULBs own resources from collection of user fees, land monetization, etc., (ii) innovative finance mechanisms such as municipal bonds, (iii) leverage borrowings from financial institutions (such as banks), and (iv) the private sector through Public Private Partnerships (PPPs).
The total cost of projects proposed under the various SCPs of the 90 winner cities is Rs 1.9 lakh crore. About 42% of this amount will come from central and state funding, 23% through private investments and PPPs, and 19% through convergence with other schemes (such as HRIDAY, AMRUT, Swachh Bharat-Urban). The remaining will be generated by the cities through the levy of local taxes, and user fees.
What are some of the issues to consider?
Financial capacity of cities: Under the Mission, cities have to generate additional revenue through various sources including market borrowings, PPPs, and land monetization. The High Powered Expert Committee on Indian Urban Infrastructure and Services (HPEC) had observed that ULBs in India are among the weakest in the world, both in terms of capacity to raise resources and financial autonomy. Even though ULBs have been getting higher allocations from the centre and states, and tax devolution to them has increased, their own tax bases are narrow. Further, owing to their poor governance and financial situation, ULBs find it difficult to access external financing.
Such a situation may pose problems when implementing the Mission, where the ULBs have to raise a significant share of the revenue through external sources (PPPs, market borrowings). For example, the Bhubaneswar Smart City Plan has a total project cost of Rs 4,537 crore (over five years), while the city’s annual budget for 2014-15 was Rs 469 crore.
In order to improve the finances of the ULBs, committees have made various recommendations, which include:
The government has recently introduced a few policies and mechanisms to address municipal financing. Examples include value capture financing through public investments in infrastructure projects, and a credit rating system for cities. In June 2017, the Pune Municipal Corporation raised Rs 200 crore by issuing municipal bonds.
Technical capacity of the ULBs: The Smart Cities Mission seeks to empower ULBs to raise their own revenue, and also lays emphasis on the capacity building of ULBs. The HPEC had observed that municipal administration has suffered due to: (i) presence of untrained and unskilled manpower, and (ii) shortage of qualified technical staff and managerial supervisors. It had recommended improving the technical capacity of ULBs by providing technical assistance to state governments, and ULBs in planning, financing, monitoring, and operation of urban programmes. The central government had allocated Rs 10.5 crore towards the capacity building component of the Mission in 2017-18.
The Ministry of Urban Development has been running several programmes to improve capacity of ULBs. This includes MoUs with 18 states to conduct training programmes for their ULB staff.
Coverage of the Mission: The Mission covers 100 cities, of which 99 have been announced as winners so far. The urban population that will be impacted through the Mission is around 96 million (data for 90 cities excluding the recently announced 9 cities).
As per Census 2011, India’s urban population was 377 million. The Mission impacts about 25% of this population. Further, most of the SCPs approved so far focus on area-based development, thus affecting a particular area of the cities. About 80% of the total project cost proposed is towards this model of development. In each city, this area-based development will cover up to 50 acres of area. The remaining 20% of the project cost is towards pan-city development proposals, which provide smart planning solutions for the entire city. It may be argued that even within the selected cities, the Mission will only impact few selected areas, and not necessarily help with development of the entire city.
On October 18, it was reported in the news that the central government has been given more time for framing rules under the Citizenship (Amendment) Act, 2019. The President had given assent to this Act in December 2019 and the Act came into force in January 2020. Similarly, about two years have passed since the new labour codes were passed by Parliament, and the final Rules are yet to be published. This raises the question how long the government can take to frame Rules and what is the procedure guiding this. In this blog, we discuss the same.
Under the Constitution, the Legislature has the power to make laws and the Executive is responsible for implementing them. Often, the Legislature enacts a law covering the general principles and policies, and delegates the power to the Executive for specifying certain details for the implementation of a law. For example, the Citizenship Amendment Act provides who will be eligible for citizenship. The certificate of registration or naturalization to a person will be issued, subject to conditions, restrictions, and manner as may be prescribed by the central government through Rules. Delay in framing Rules results in delay in implementing the law, since the necessary details are not available. For example, new labour codes provide a social security scheme for gig economy workers such as Swiggy and Zomato delivery persons and Uber and Ola drivers. These benefits as per these Codes are yet to be rolled out as the Rules are yet to be notified.
Timelines and checks and balances for adherence
Each House of Parliament has a Committee of Members to examine Rules, Regulations, and government orders in detail called the Committee on Subordinate Legislation. Over the years, the recommendations of these Committees have shaped the evolution of the procedure and timelines for framing subordinate legislation. These are reflected in the Manual of Parliamentary Procedures issued by the Ministry of Parliamentary Affairs, which provides detailed guidelines.
Ordinarily, Rules, Regulations, and bye-laws are to be framed within six months from the date on which the concerned Act came into force. Post that, the concerned Ministry is required to seek an extension from the Parliamentary Committees on Subordinate Legislation. The reason for the extension needs to be stated. Such extensions may be granted for a maximum period of three months at a time. For example, in case of Rules under the Citizenship Amendment Act, 2019, at an earlier instance, an extension was granted on account of the onset of the COVID-19 pandemic.
|
Activity |
Timeline |
|
|
|
|
|
|
To ensure monitoring, every Ministry is required to prepare a quarterly report on the status of subordinate legislation not framed and share it with the Ministry of Law and Justice. These reports are not available in the public domain.
Recommendations to address delays
Over the years, the Subordinate Legislation Committees in both Houses have observed multiple instances of non-adherence to the above timelines by various Ministries. To address this, they have made the following key recommendations:
Are all Rules under an Act required to be framed?
Usually, the expressions used in an Act are “The Central Government may, by notification, make rules for carrying out the provisions of this Act.”, or “as may be prescribed”. Hence, it may appear that the laws aim to enable rule-making instead of mandate rule-making. However, certain provisions of an Act cannot be brought into force if the required details have not been prescribed under the Rules. This makes the implementation of the Act consequent to the publication of respective Rules. For example, the Criminal Procedure (Identification) Act, 2022 enables the police and certain other persons to collect identity-related information about certain persons. It provides that the manner of collection of such information may be specified by the central government. Unless the manner is prescribed, such collection cannot take place.
That said, some other rule-making powers may be enabling in nature and subject to discretion by the concerned Ministry. In 2016, Rajya Sabha Committee on Subordinate Legislation examined the status of Rules and Regulations to be framed under the Energy Conservation Act, 2001. It observed that the Ministry of Power had held that two Rules and three Regulations under this Act were not necessary. The Ministry of Law and Justice had opined that those deemed not necessary were enabling provisions meant for unforeseen circumstances. The Rajya Sabha Committee (2016) had recommended that where the Ministry does not feel the need for framing subordinate legislation, the Minister should table a statement in Parliament, stating reasons for such a conclusion.
Some key issues related to subordinate legislation
The Legislature delegates the power to specify details for the implementation of a law to the Executive through powers for framing subordinate legislation. Hence, it is important to ensure these are well-scrutinised so that they are within the limits envisaged in the law.
See here for our recently published analysis of the Criminal Procedure (Identification) Rules, 2022, notified in September 2022. Also, check out PRS analysis of:
