Minimum Support Price (MSP) is the assured price at which foodgrains are procured from farmers by the central and state governments and their agencies, for the central pool of foodgrains. The central pool is used for providing foodgrains under the Public Distribution System (PDS) and other welfare schemes, and also kept as reserve in the form of buffer stock. However, in the past few months, there have been demands to extend MSP to private trade as well and guarantee MSP to farmers on all kinds of trade. This blogpost looks at the state of public procurement of foodgrains in India and the provision of MSP.
Is MSP applicable for all crops?
The central government notifies MSP for 23 crops every year before the Kharif and Rabi seasons based on the recommendations of the Commission for Agricultural Costs and Prices, an attached office of the Ministry of Agriculture and Farmers’ Welfare. These crops include foodgrains such as cereals, coarse grains, and pulses. However, public procurement is largely limited to a few foodgrains such as paddy (rice), wheat, and, to a limited extent, pulses (Figure 1).
Figure 1: Percentage of crop production that was procured at MSP in 2019-20
Sources: Unstarred Question No. 331, Lok Sabha, September 15, 2020; PRS.
Since rice and wheat are the primary foodgrains distributed under PDS and stored for food security, their procurement level is considerably high. However, the National Food Security Act, 2013 requires the central and state governments to progressively undertake necessary reforms in PDS. One of the reforms requires them to diversify the commodities distributed under PDS over a period of time.
How does procurement vary across states?
The procurement of foodgrains is largely concentrated in a few states. Three states (Madhya Pradesh, Punjab, and Haryana) producing 46% of the wheat in the country account for 85% of its procurement (Figure 2). For rice, six states (Punjab, Telangana, Andhra Pradesh, Chhattisgarh, Odisha, and Haryana) with 40% of the production have 74% share in procurement (Figure 3). The National Food Security Act, 2013 requires the central, state, and local governments to strive to progressively realise certain objectives for advancing food and nutritional security. One of these objectives involves geographical diversification of the procurement operations.
Figure 2: 85% wheat procurement is from three states (2019-20)
Sources: Department of Food and Public Distribution; PRS.
Figure 3: 76% of the rice procured comes from six states (2019-20)
Sources: Department of Food and Public Distribution; PRS.
Is MSP mandatory for private trade as well in some states?
MSP is not mandatory for purchase of foodgrains by private traders or companies. It acts as a reference price at which the government and its agencies procure certain foodgrains from farmers.
In September 2020, the central government enacted a new farm law which allows anyone with a PAN card to buy farmers’ produce in the ‘trade area’ outside the markets notified or run by the state Agricultural Produce Marketing Committees (APMCs). Buyers do not need to get a license from the state government or APMC, or pay any tax to them for such purchase in the ‘trade area’. These changes in regulations raised concerns regarding the kind of protections available to farmers in the ‘trade area’ outside APMC markets, particularly in terms of the price discovery and payment. In October 2020, Punjab passed a Bill in response to the central farm law to prohibit purchase of paddy and wheat below MSP. Any person or company compelling or pressurising farmers to sell below MSP will be punished with a minimum of three-year imprisonment and a fine. Note that 72% of the wheat and 92% of the rice produced in Punjab was purchased under public procurement in 2019-20.
Similarly, in November 2020, Rajasthan passed a Bill to declare those contract farming agreements as invalid where the purchase is done below MSP. Any person or company compelling or pressurising farmers to enter into such an invalid contract will be punished with 3 to 7 years of imprisonment, or a fine of minimum five lakh rupees, or both. Both these Bills have not been enacted yet as they are awaiting the Governors’ assent.
How has MSP affected the cropping pattern?
According to the central government’s procurement policy, the objective of public procurement is to ensure that farmers get remunerative prices for their produce and do not have to resort to distress sale. If farmers get a better price in comparison to MSP, they are free to sell their produce in the open market. The Economic Survey 2019-20 observed that the regular increase in MSP is seen by farmers as a signal to opt for crops which have an assured procurement system (for example, rice and wheat). The Economic Survey also noted that this indicates market prices do not offer remunerative options for farmers, and MSP has, in effect, become the maximum price that the farmers are able to realise.
Thus, MSP incentivises farmers to grow crops which are procured by the government. As wheat and rice are major food grains provided under the PDS, the focus of procurement is on these crops. This skews the production of crops in favour of wheat and paddy (particularly in states where procurement levels are high), and does not offer an incentive for farmers to produce other items such as pulses. Further, this puts pressure on the water table as these crops are water-intensive crops.
To encourage crop diversification and thereby reduce the consumption of water, some state governments are taking measures to incentivise farmers to shift away from paddy and wheat. For example, Haryana has launched a scheme in 2020 to provide Rs 7,000 per acre to those farmers who will use more than 50% of their paddy area (as per the area sown in 2019-20) for other crops. The farmers can grow maize, bajra, pulses, or cotton in such diversified area. Further, the crop produce grown in such diversified area under the scheme will be procured by the state government at MSP.
The Monetary Policy Committee (MPC) has decided to conduct an off-cycle meeting today to discuss the failure to meet the inflation target under Section 45ZN of the Reserve Bank of India Act, 1934. As per the Reserve Bank of India Act (RBI), 1934, MPC is required to meet at least four times each year, to discuss the macroeconomic issues in the country, and take policy decisions to address those. This is the second time MPC has conducted an off-cycle meeting in 2022-23. The meeting is scheduled in light of inflation being consistently high for nine consecutive months.
In this blog, we discuss what the inflation targeting framework is, examine retail and wholesale prices, and the divergence between them.
What is the inflation targeting framework, and what happens if inflation is persistently high?
In 2016, Parliament amended the RBI Act, 1934 to change the monetary policy, and introduce an inflation targeting framework. This framework prioritises price stability to achieve sustainable GDP growth. Price stability allows investors to confidently invest their money for productive activities, without worrying about it losing value. Price stability also maintains the purchasing power of consumers, i.e., the ability to purchase a good (or service) with a given amount of money.
As per the new framework, the central government, in consultation with RBI sets: (i) an inflation target, and (ii) an upper and lower tolerance level for retail inflation. The target has been set at 4%, with an upper tolerance limit of 6% and a lower tolerance limit of 2%. The upper and lower limits indicate that although it is desirable for inflation to be close to 4%, deviation between these limits is acceptable. The target and bands are revised every five years. In March 2021, the existing targets were carried forward.
Retail inflation has been above 6% for the past nine months, and it has been above 4% from October 2019 onwards (See Figure 1).
Figure 1: Consumer price index (year-on-year; in percentage)
Sources: Database on Indian Economy, Reserve Bank of India; PRS.
If inflation is above or below the prescribed limits for three quarters, RBI must submit a report to the central government explaining why prices have been rising (or falling) persistently, what will be done to correct that, and an estimate as to when the target will be achieved.
The MPC uses tools such as interest rates to control the level of inflation in the economy. One such rate is the policy repo rate, which is the rate at which RBI lends money to banks. An increase in the policy repo rate makes borrowing money more costly, and hence is expected to control inflation by reducing the money supply. MPC increased this rate from 4% in April 2022 to 4.4% in May 2022, to 4.9% in June 2022, to 5.4% in August 2022, and to 5.9% in September 2022.
Breaking down the Consumer Price Index and the Wholesale Price Index
Consumer Price Index (CPI) measures the general prices of goods and services such as food, clothing, and fuel over time. Retail inflation is calculated as the change in the CPI over a period of time. Goods and services such as petrol, food products, health, and education are considered for its calculation, which are assigned different weights (See Table 1). Between February 2022 and August 2022, the average annual inflation was 6.9%. The rise in prices of subcomponents of the CPI during this period is indicated in Table 2.
|
Table 1: Assigned weights for the calculation of CPI
Sources: MOSPI; PRS. |
Table 2: Average inflation of some CPI components
Sources: Database on Indian Economy, RBI; PRS. |
CPI is not the only index that measures inflation in an economy. The Wholesale Price Index (WPI) measures the wholesale prices of goods. A change in wholesale prices reflects wholesale inflation. Table 3 indicates the weights assigned to goods for calculating the WPI. Manufactured goods include metals, chemicals, food products, and textiles.
|
Primary articles (23%) include food articles, and crude petroleum and natural gas. Fuel and power (12%) include mineral oils, electricity, and coal. WPI has remained above 10% from April 2021 onwards. It reached an all-time high of 17% in May 2022. This was driven by the inflation in metals, kerosene and petroleum coke, fruits and vegetables, and palm oil. |
Table 3:Assigned weights for the
Sources: Ministry of Commerce and Industry; PRS. |
Why has WPI inflation been consistently above CPI inflation?
Movements in the WPI have an impact on the CPI. For almost a year and half, CPI inflation has remained below WPI inflation. However, as per the design of the indices, it is expected that CPI would remain above WPI, and that any increase in WPI would reflect in the CPI after a time lag. This is because retail prices include taxes (as a percentage of price), while wholesale prices do not. Additionally, some of the goods in WPI act as inputs in the goods considered in CPI. An increase in input prices would lead to higher retail prices after a time lag.
We discuss possible reasons for why CPI has remained below WPI for a year and a half.
Figure 2: Consumer Price Index and Wholesale Price Index
Sources: Database on Indian Economy, Reserve Bank of India; PRS.
Composition of indices
As indicated in Table 2 and 3, the composition of the two indices varies. For instance, prices of manufacture of basic metals, chemicals, and machinery grew at an average rate of 13% between February 2021 and September 2022. They contribute 7% to the WPI. These are input goods for producing final goods and services such as automobiles, which are included in the CPI. The rise in prices of transport vehicles, communication devices, fuel for transport, and housing (CPI components) rose by 6% during this period.
The Ministry of Finance has observed that wholesale prices did not feed into retail prices (from March 2021 onwards) as wholesalers absorbed the rising input costs and did not pass them on to retailers. In August 2022, it noted that as retail prices are rising now, the pass-through may occur.
