In the aftermath of the nuclear leaks in Japan, there have been concerns regarding the safety of nuclear power plants around the world. There are some proposals to change the regulatory framework in India to ensure the safety of these plants. We examine some of the issues in the current structure.   Which body looks at safety issues regarding nuclear power plants in the country?   The apex institution tasked to look at issues regarding nuclear safety is the Atomic Energy Regulatory Board. The AERB was set up in 1983 to carry out regulatory and safety functions regarding nuclear and radiation facilities. The agency has to give clearances for establishing nuclear power plants and facilities.   It issues clearances for nuclear power projects in stages after safety reviews. The safety of setting up a nuclear plant in any given area is also assessed by the AERB. For example, it would have looked into the safety of setting up a nuclear power project in Jaitapur in Maharashtra.   AERB also reviews the safety mechanisms within existing nuclear plants and facilities. To do this, it requires nuclear facilities to report their compliance with safety regulations, and also makes periodic inspections.   Under the recently passed Civil Liability for Nuclear Damage Act, 2010 the AERB is also the authority responsible for notifying when a nuclear incident takes place. Mechanisms for assessing and claiming compensation by victims will be initiated only after the nuclear incident is notified.   Why is the Atomic Energy Regulatory Board in the news?   Prime Minister Manmohan Singh announced on March 29, 2011, "We will strengthen the Atomic Energy Regulatory Board and make it a truly autonomous and independent regulatory authority."   This announcement came in the backdrop of the continuing crisis and high radiation levels at the Fukusima nuclear plant in Japan.   News reports opined that the lack of proper autonomy of Japan's nuclear regulator curbed its effectiveness. Japan's ministry of economy, trade and industry regulates the nuclear power industry, and also promotes nuclear technology. These two aims work at cross-purposes. India's regulatory structure is similar to Japan in some respects.   What measures has the AERB taken post the Fukushima nuclear incident in Japan?   Following the nuclear incident in Japan, a high-level committee under the chairmanship of a former AERB chairman has been set up to review the safety of Indian nuclear power plants.   The committee shall assess the capability of Indian nuclear power plants to withstand earthquakes, tsunamis, cyclones, floods, etc. The committee will review the adequacy of provisions for ensuring safety in case of such events.   Is there any issue in the current regulatory structure?   The AERB is a regulatory body, which derives administrative and financial support from the Department of Atomic Energy. It reports to the secreatry, DAE.   The DAE is also involved in the promotion of nuclear energy, and is also responsible for the functioning of the Nuclear Power Corporation of India Limited, which operates most nuclear power plants in the country.     The DAE is thus responsible both for nuclear safety (through the AERB), as well as the operation of nuclear power plants (through NPCIL). This could be seen as a conflict of interest.   How does the system of independent regulators differ from this?   The telecom sector provides an example of an independent regulator.   The Telecom Regulatory Authority of India does not report to the Department of Telecommunications. The DoT is responsible for policy matters related to telecommunications, promoting private investment in telecom, and also has a stake in BSNL. Had TRAI reported to the DoT, there would have been a conflict of interest within the DoT.   What will the proposed legislation change?   Recent news reports have stated that a bill to create an independent regulatory body will be introduced in Parliament soon.   Though there is no draft bill available publicly, news reports state that an independent Nuclear Regulatory Authority of India will be created by the bill, and the authority will subsume the AERB within it.   This post first appeared as an article on rediff.com and can be accessed here.

The Monetary Policy Committee (MPC) has decided to conduct an off-cycle meeting today to discuss the failure to meet the inflation target under Section 45ZN of the Reserve Bank of India Act, 1934. As per the Reserve Bank of India Act (RBI), 1934, MPC is required to meet at least four times each year, to discuss the macroeconomic issues in the country, and take policy decisions to address those. This is the second time MPC has conducted an off-cycle meeting in 2022-23. The meeting is scheduled in light of inflation being consistently high for nine consecutive months.

In this blog, we discuss what the inflation targeting framework is, examine retail and wholesale prices, and the divergence between them.   

What is the inflation targeting framework, and what happens if inflation is persistently high?

In 2016, Parliament amended the RBI Act, 1934 to change the monetary policy, and introduce an inflation targeting framework. This framework prioritises price stability to achieve sustainable GDP growth. Price stability allows investors to confidently invest their money for productive activities, without worrying about it losing value. Price stability also maintains the purchasing power of consumers, i.e., the ability to purchase a good (or service) with a given amount of money.

As per the new framework, the central government, in consultation with RBI sets: (i) an inflation target, and (ii) an upper and lower tolerance level for retail inflation. The target has been set at 4%, with an upper tolerance limit of 6% and a lower tolerance limit of 2%. The upper and lower limits indicate that although it is desirable for inflation to be close to 4%, deviation between these limits is acceptable. The target and bands are revised every five years. In March 2021, the existing targets were carried forward.  

Retail inflation has been above 6% for the past nine months, and it has been above 4% from October 2019 onwards (See Figure 1).

Figure 1: Consumer price index (year-on-year; in percentage)

image

Sources: Database on Indian Economy, Reserve Bank of India; PRS.

If inflation is above or below the prescribed limits for three quarters, RBI must submit a report to the central government explaining why prices have been rising (or falling) persistently, what will be done to correct that, and an estimate as to when the target will be achieved.   

The MPC uses tools such as interest rates to control the level of inflation in the economy. One such rate is the policy repo rate, which is the rate at which RBI lends money to banks. An increase in the policy repo rate makes borrowing money more costly, and hence is expected to control inflation by reducing the money supply. MPC increased this rate from 4% in April 2022 to 4.4% in May 2022, to 4.9% in June 2022, to 5.4% in August 2022, and to 5.9% in September 2022.

Breaking down the Consumer Price Index and the Wholesale Price Index

Consumer Price Index (CPI) measures the general prices of goods and services such as food, clothing, and fuel over time. Retail inflation is calculated as the change in the CPI over a period of time. Goods and services such as petrol, food products, health, and education are considered for its calculation, which are assigned different weights (See Table 1). Between February 2022 and August 2022, the average annual inflation was 6.9%. The rise in prices of subcomponents of the CPI during this period is indicated in Table 2.

Table 1: Assigned weights for the calculation of CPI

Category

Weight

Food and beverages

46%

Miscellaneous (including petrol and diesel, health, and education)

28%

Housing

10%

Clothing and footwear

7%

Fuel and light

7%

Pan, tobacco, and intoxications

2%

Total

100%

Sources: MOSPI; PRS.

Table 2: Average inflation of some CPI components
between February 2022 to August 2022 (in percentage)

Subcategory of CPI

Average inflation

Vegetables 

13.26%

Oils and fats

12.46%

Footwear

11.41%

Fuel and Light

9.88%

Transport and communication

7.74%

Cereals and products

6.05%

Sources: Database on Indian Economy, RBI; PRS.

CPI is not the only index that measures inflation in an economy. The Wholesale Price Index (WPI) measures the wholesale prices of goods. A change in wholesale prices reflects wholesale inflation. Table 3 indicates the weights assigned to goods for calculating the WPI. Manufactured goods include metals, chemicals, food products, and textiles.   

Primary articles (23%) include food articles, and crude petroleum and natural gas. Fuel and power (12%) include mineral oils, electricity, and coal.  WPI has remained above 10% from April 2021 onwards. It reached an all-time high of 17% in May 2022. This was driven by the inflation in metals, kerosene and petroleum coke, fruits and vegetables, and palm oil.

Table 3:Assigned weights for the
calculation of WPI (in percentage)

Category

Weight

Manufactured products

64%

Primary articles

23%

Fuel and power

12%

All commodities

100%

Sources: Ministry of Commerce and Industry; PRS.

Why has WPI inflation been consistently above CPI inflation?

Movements in the WPI have an impact on the CPI.  For almost a year and half, CPI inflation has remained below WPI inflation.  However, as per the design of the indices, it is expected that CPI would remain above WPI, and that any increase in WPI would reflect in the CPI after a time lag.  This is because retail prices include taxes (as a percentage of price), while wholesale prices do not.  Additionally, some of the goods in WPI act as inputs in the goods considered in CPI.  An increase in input prices would lead to higher retail prices after a time lag.

We discuss possible reasons for why CPI has remained below WPI for a year and a half.

Figure 2: Consumer Price Index and Wholesale Price Index

image

Sources: Database on Indian Economy, Reserve Bank of India; PRS.

Composition of indices

As indicated in Table 2 and 3, the composition of the two indices varies. For instance, prices of manufacture of basic metals, chemicals, and machinery grew at an average rate of 13% between February 2021 and September 2022.  They contribute 7% to the WPI. These are input goods for producing final goods and services such as automobiles, which are included in the CPI. The rise in prices of transport vehicles, communication devices, fuel for transport, and housing (CPI components) rose by 6% during this period.

The Ministry of Finance has observed that wholesale prices did not feed into retail prices (from March 2021 onwards) as wholesalers absorbed the rising input costs and did not pass them on to retailers. In August 2022, it noted that as retail prices are rising now, the pass-through may occur.