Last month, the Pension Fund Regulatory and Development Authority (PFRDA) issued revised guidelines for the registration of the Pension Fund Managers (PFMs).  These guidelines are for the PFMs to manage the National Pension System (NPS) in the non-governmental and private sector.  See here.  The NPS was implemented in 2004 for all government employees and later extended to the private sector in 2009. The guidelines bring about the following changes in the NPS:

  • No limitation on the number of PFMs – Under the previous system, the number of PFMs was predetermined and bidders would then fill up these slots.  There are seven PFMs in the NPS.
  •  No bidding process – In the earlier system, interested parties had to go through a bidding process to become a PFM.  The lowest bidders would be appointed the PFMs.  However, the new guidelines have done away with the bidding system.  Any player interested in becoming a PFM can now do so by fulfilling certain eligibility criteria laid down by the PFRDA.
  • No uniform fee to be charged by all PFMs – The PFMs earlier had to charge a fixed fee amount, which was uniform for all the PFMs.  The new guidelines states that the PFRDA would lay down an overall ceiling and the PFMs would be at liberty to prescribe their own fee provided it is under this overall ceiling.

Although NPS was made accessible on a voluntary basis to non-government employees and those working in the private sector since 2009, the subscription to the schemes under NPS was lower than expected.  In August 2010, a committee was set up under the chairmanship of Mr. G.N. Bajpai to review the implementation of NPS in the informal sector.  The Committee noted that since NPS was opened to the general public there were only 50,000 private sector subscribers until May 2011.  According to the Committee, the low subscription was due to the low-to-negligible distribution incentive to the PFMs to distribute the different schemes to the subscribers to invest their funds.  The Committee thus recommended that PFRDA should consider revising the structure of the NPS so as to increase subscription.  It suggested making the fee structure dynamic for PFMs.  The Committee had also suggested that there should be some revision in the bidding as well as the selection process for the PFMs to increase competition and thereby incentivise them to distribute the schemes. These changes, as suggested by the Bajpai Committee and now notified by the PFRDA, are different from the original design of the NPS.  The Old Age Social and Income Security (OASIS) Report of 2000, which had initially suggested the establishment of pension system for the unorganised sector in the country, had recommended a low-cost structure for the pension system.  The Report had stated that the choice of PFMs should be based on a bidding process where the lowest bidder should be made a PFM under the NPS.  The rationale for the auction base for the PFMs was that it would provide a system to the subscribers whereby they could make investments for their old age by paying a minimal fee.  A set uniform fee was meant to eliminate the large marketing expenses which would ultimately get passed on to the subscibers.  In addition, the intent behind keeping the fund managers from the distribution and marketing of the schemes was to prevent any mis-selling (misleading an investor about the characteristics of a product) that may happen. Recent newspaper reports have raised doubt if these new rules would help in increasing the penetration of the NPS in the markets.  However, the chairman of PFRDA, Mr. Yogesh Agarwal, in a recent interview explained that it was important to bring about changes in the structure of the NPS.  According to him a scheme which was mandatory for the government sector could not be expected to perform as well in the private sector (where it is voluntary) without any changes made to its structure.  He also stated that the NPS should be able to compete with other financial products such as insurance and mutual funds in the market. See here for the PRS Legislative Brief on the PFRDA Bill, 2011. Notes: The seven PFMs are LIC Pension Fund Ltd., UTI Retirement Solutions Ltd., SBI Pension Funds Pvt. Ltd., IDFC Pension Fund Management Co. Ltd., ICICI Prudential Pension Funds Management Co. Ltd., Kotak Mahindra Pension funds Ltd., and Reliance Capital Pension Fund Ltd..  

Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts.  It had first recommended these names earlier this year and in August last year, but these appointments were not made.  The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts).  Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases.  As of today, more than four crore cases are pending across all courts in India.   In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.

High vacancy of judges across courts

Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges.  Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually.  However, vacancies persist due to insufficient appointments (see Figures 1 and 2).  Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts). 

Figure 1: Vacancy of judges in High Courts

Figure 2: Vacancy of judges in subordinate courts

image

image

Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS.

As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34).  Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098).  Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges.  In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3).  The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled. 

Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021)

image

Source: Vacancy Statement, Department of Justice; PRS.

 

 

 

 

 

 

 

 

 

Appointments of High Court judges are guided by a memorandum of procedure.  As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs.  However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts.  Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court.  No timeline is prescribed for this stage of the appointment process.  In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.

As of today, over 3.6 crore cases are pending before subordinate courts in India.  As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts.  Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4).  Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.

For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.

Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)

image

Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS.

 

How many judges do we need?

The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary.  Lack of adequate number of judges means a greater workload per judge.  Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts.  Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1). 

Table 1: Methods recommended for calculating the required number of judges for subordinate courts

Method of calculation

Recommendation and its status

Judge-to-population ratio: optimum number of judges per million population

The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people.  This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002).  For 2020, the judge-to-population ratio was 21 judges per million population.     Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts.

Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge

The Law Commission of India (2014) proposed this method.  It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions.

Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions

The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method.     It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts.     In 2017, the Supreme Court accepted this model.

Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study

Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts.  It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court.  The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi.

Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.