Applications for LAMP Fellowship 2025-26 are now open. Apply here. The last date for submitting applications is December 21, 2024
This post is pursuant to the discussion on population stabilization being held in Parliament currently. India is the second most populous country in the world, sustaining 16.7% of the world's population on 2.4% of the world's surface area. The population of the country has increased from 238 million in 1901 to 1,029 million in 2001. Even now, India continues to add about 26 million people per year. This is because more than 50% of the population is in the reproductive age group. India launched a family planning programme in 1952. Though the birth rate started decreasing, it was accompanied by a sharp decrease in death rate, leading to an overall increase in population. In 1976, the first National Population Policy was formulated and tabled in Parliament. However, the statement was neither discussed nor adopted. The National Health Policy was then designed in 1983. It stressed the need for ‘securing the small family norm, through voluntary efforts and moving towards the goal of population stabilization’. While adopting the Health Policy, Parliament emphasized the need for a separate National Population Policy. This was followed by the National Population Policy in 2000. The immediate objective of the policy was to address the unmet needs for contraception, health care infrastructure and personnel, and to provide integrated service delivery for basic reproductive and child health care. The medium-term objective was to bring TFR (Total Fertility Rate - the average number of children a woman bears over her lifetime) to replacement levels by 2010. In the long term, it targeted a stable population by 2045, ‘at a level consistent with the requirements of sustainable economic growth, social development, and environmental protection.’ (See http://populationcommission.nic.in/npp.htm) Total Fertility Rate India’s TFR was around 6.1 in 1961. This meant that an average woman bore over 6 children during her lifetime. Over the years, there has been a noticeable decrease in this figure. The latest National Family Health Survey (NFHS III, 2005-06) puts it at 2.7. TFR is almost one child higher in rural areas (3.0) than in urban areas (2.1). TFR also varies widely across states. The states of Andhra Pradesh, Goa, Himachal Pradesh, Karnataka, Kerala, Maharashtra, Punjab, Sikkim and Tamil Nadu have reached a TFR of 2.1 or less. However, several other states like UP, Bihar, MP, Rajasthan, Orissa, Uttaranchal, Jharkhand and Chhattisgarh, where over 40% of the population lives, TFR is still high. (See http://www.jsk.gov.in/total_fertility_rate.asp) Factors that affect population growth The overarching factor that affects population growth is low socio-economic development. For example, Uttar Pradesh has a literacy rate of 56%; only 14% of the women receive complete antenatal care. Uttar Pradesh records an average of four children per couple. In contrast, in Kerala almost every person is literate and almost every woman receives antenatal care. Kerala records an average of two children per couple. Infant mortality In 1961, the Infant Mortality Rate (IMR), deaths of infants per 1000 live births, was 115. The current all India average is much lower at 57. However, in most developed countries this figure is less than 5. IMR is the lowest at 15 in Kerala and the highest at 73 in Uttar Pradesh. Empirical correlations suggest that high IMR leads to greater desire for children. Early marriage Nationwide almost 43% of married women aged 20-24 were married before the age of 18. This figure is as high as 68% in Bihar. Not only does early marriage increase the likelihood of more children, it also puts the woman's health at risk. Level of education Fertility usually declines with increase in education levels of women. Use of contraceptives According to NFHS III (2005-06), only 56% of currently married women use some method of family planning in India. A majority of them (37%) have adopted permanent methods like sterilization. Other socio-economic factors The desire for larger families particularly preference for a male child also leads to higher birth rates. It is estimated that preference for a male child and high infant mortality together account for 20% of the total births in the country. Government initiatives The National Population Policy 2000 gave a focused approach to the problem of population stabilization. Following the policy, the government also enacted the Constitution (84th Amendment) Act, 2002. This Amendment extended the freeze on the state-wise allocation of seats in the Lok Sabha and the Rajya Sabha to 2026. It was expected that this would serve ‘as a motivational measure, in order to enable state governments to fearlessly and effectively pursue the agenda for population stabilization contained in the National Population Policy, 2000’. The National Commission on Population was formed in the year 2000. The Commission, chaired by the Prime Minister, has the mandate to review, monitor and give directions for implementation of the National Population Policy. The Jansankhya Sthirata Kosh (National Population Stabilization Fund) was setup as an autonomous society of the Ministry of Health and Family Welfare in 2005. Its broad mandate is to undertake activities aimed at achieving population stabilization. Programmes like the National Rural Health Mission, Janani Suraksha Yojana, ICDS (Integrated Child Development Services) etc. have also been launched by the government to tackle the healthcare needs of people. This is also expected to contribute to population stabilization. Free contraceptives are also being provided. In addition, monetary incentives are given to couples undertaking permanent family planning methods like vasectomy and tubectomy. Nutritional and educational problems are being targeted through programs like the mid-day meal scheme and the recently enacted Right to Education. ---------------- For more details on the issue, see the website of the National Population Stabilization Fund (http://www.jsk.gov.in/) Sources: Registrar General, India National Population Stabilization Fund National Commission on Population National Family Health Survey III (2005-06)
Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts. It had first recommended these names earlier this year and in August last year, but these appointments were not made. The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts). Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases. As of today, more than four crore cases are pending across all courts in India. In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.
High vacancy of judges across courts
Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges. Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually. However, vacancies persist due to insufficient appointments (see Figures 1 and 2). Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts).
|
Figure 1: Vacancy of judges in High Courts |
Figure 2: Vacancy of judges in subordinate courts |
|
|
|
|
Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS. |
|
As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34). Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098). Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges. In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3). The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled.
|
Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021)
|
|
Source: Vacancy Statement, Department of Justice; PRS. |
Appointments of High Court judges are guided by a memorandum of procedure. As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs. However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts. Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court. No timeline is prescribed for this stage of the appointment process. In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.
As of today, over 3.6 crore cases are pending before subordinate courts in India. As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts. Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4). Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.
For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.
Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)
|
|
|
Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS. |
How many judges do we need?
The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary. Lack of adequate number of judges means a greater workload per judge. Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts. Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1).
Table 1: Methods recommended for calculating the required number of judges for subordinate courts
|
Method of calculation |
Recommendation and its status |
|
Judge-to-population ratio: optimum number of judges per million population |
The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people. This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002). For 2020, the judge-to-population ratio was 21 judges per million population. Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts. |
|
Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge |
The Law Commission of India (2014) proposed this method. It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions. |
|
Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions |
The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method. It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts. In 2017, the Supreme Court accepted this model. |
|
Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study |
Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts. It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court. The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi. |
Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.
