The shortage of skilled man-power is a cause for concern in most sectors in India. Experts acknowledge that the present higher education system in India is not equipped to address this problem without some changes in the basic structure. Official records show that the gross enrollment ratio in higher education is only 11 per cent while the National Knowledge Commission says only seven per cent of the population between the age group of 18-24 enters higher education. Even those who have access are not ensured of quality. Despite having over 300 universities, not a single Indian university is listed in the top 100 universities of the world. Present Regulatory framework The present system of higher education is governed by the University Grants Commission (UGC), which is the apex body responsible for coordination, determination and maintenance of standards, and release of grants. Various professional councils are responsible for recognition of courses, promotion of professional institutions and providing grants to undergraduate programmes. Some of the prominent councils include All India Council for Technical Education (AICTE), Medical Council of India (MCI) and the Bar Council of India (BCI). The Central Advisory Board of Education coordinates between the centre and the states. Universities in India can be established by an Act of Parliament or state legislatures such as Delhi University, Calcutta University and Himachal Pradesh University. Both government-aided and unaided colleges are affiliated with a university. The central government can also declare an institution to be a deemed university based on recommendation of the University Grants Commission. There are about 130 deemed universities and includes universities such as Indian Institute of Foreign Trade and Birla Institute of Technology. Such universities are allowed to set their own syllabus, admission criteria and fees. Some prominent institutions are also classified as institutions of national importance. Reforms in Higher Education There have been calls to revamp the regulatory structure, make efforts to attract talented faculty, and increase spending on education from about 4% of the Gross Domestic Product (GDP) to about 6%. Presently, the allocation for higher education is at a measly 0.7% of GDP. From time to time government appointed various expert bodies to suggest reforms in the education sector. The two most recent recommendations were made by the National Knowledge Commission (NKC) formed in 2005 under the chairmanship of Mr Sam Pitroda and the Committee to Advise on Renovation and Rejuvenation of Higher Education, formed in 2008 under the chairmanship of Shri Yashpal.
| Key Recommendations of NKC | Key Recommendations of Yashpal Committee |
|
|
| Sources: The Report to the Nation, 2006-09, NKC; Yashpal Committee Report, 2009; PRS | |
The Draft NCHER Bill, 2010 In response to the reports, the government drafted a Bill on higher education and put it in the public domain. The draft National Commission for Higher Education and Research Bill, 2010 seeks to establish the National Commission for Higher Education and Research whose members shall be appointed by the President on the recommendation of the selection committee (include Prime Minister, Leader of the Opposition in Lok Sabha, Speaker). The Commission shall take measures to promote autonomy of higher education and for facilitating access, inclusion and opportunities to all. It may specify norms for grant of authorisation to a university, develop a national curriculum framework, specify requirement of academic quality for awarding a degree, specify minimum eligibility conditions for appointment of Vice Chancellors, maintain a national registry, and encourage universities to become self regulatory. Vice Chancellors shall be appointed on the recommendation of a collegium of eminent personalities. The national registry shall be maintained with the names of persons eligible for appointment as Vice Chancellor or head of institution of national importance. Any person can appeal a decision of the Commission to the National Educational Tribunal. (For opinions by some experts on the Bill, click here and here.) Other Bills that are in the pipeline include The Foreign Educational Institutions (Regulation of Entry and Operation) Bill, 2010; the Central Educational Institutions (Reservation in Admission) (Amendment) Bill, 2010; and the Innovation Universities Bill, 2010.
Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts. It had first recommended these names earlier this year and in August last year, but these appointments were not made. The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts). Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases. As of today, more than four crore cases are pending across all courts in India. In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.
High vacancy of judges across courts
Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges. Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually. However, vacancies persist due to insufficient appointments (see Figures 1 and 2). Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts).
|
Figure 1: Vacancy of judges in High Courts |
Figure 2: Vacancy of judges in subordinate courts |
|
|
|
|
Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS. |
|
As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34). Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098). Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges. In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3). The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled.
|
Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021)
|
|
Source: Vacancy Statement, Department of Justice; PRS. |
Appointments of High Court judges are guided by a memorandum of procedure. As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs. However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts. Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court. No timeline is prescribed for this stage of the appointment process. In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.
As of today, over 3.6 crore cases are pending before subordinate courts in India. As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts. Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4). Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.
For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.
Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)
|
|
|
Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS. |
How many judges do we need?
The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary. Lack of adequate number of judges means a greater workload per judge. Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts. Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1).
Table 1: Methods recommended for calculating the required number of judges for subordinate courts
|
Method of calculation |
Recommendation and its status |
|
Judge-to-population ratio: optimum number of judges per million population |
The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people. This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002). For 2020, the judge-to-population ratio was 21 judges per million population. Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts. |
|
Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge |
The Law Commission of India (2014) proposed this method. It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions. |
|
Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions |
The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method. It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts. In 2017, the Supreme Court accepted this model. |
|
Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study |
Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts. It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court. The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi. |
Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.
