Applications for LAMP Fellowship 2025-26 are now open. Apply here. The last date for submitting applications is December 21, 2024
Safety has been one of the biggest concerns in the Indian Railways system. While the number of accidents have gone down over the last few years, the number still remains over 100 accidents a year. In light of the recent train accidents in Uttar Pradesh (UP), we present some details around accidents and safety in the Indian Railways.
Causes of rail accidents
The number of rail accidents has declined from 325 in 2003-04 to 106 in 2015-16.[1] The number of rail accidents as per the cause are shown in the graph below. In 2015-16, majority of the accidents were caused due to derailments (60%), followed by accidents at level crossings (33%).1 In the last decade, accidents caused due to both these causes have reduced by about half. According to news reports, the recent railway accidents in UP were caused due to derailment of coaches.
Derailments
Between 2003-04 and 2015-16, derailments were the second highest reason for casualties.2 The Standing Committee on Railways, when examining the safety in railways, had noted that one of the reasons for derailments is defect in the track or coaches. Of the total track length of 1,14,907 kms in the country, 4,500 kms should be renewed annually.2 However, in 2015-16, of the 5,000 km of track length due for renewal, only 2,700 km was targeted to be renewed.2 The Committee had recommended that Indian Railways should switch completely to the Linke Hoffman Busch (LHB) coaches as they do not pile upon each other during derailments and hence cause lesser casualties.2
Un-manned level crossings
Un-manned level crossings (UMLCs) continue to be the biggest cause of casualties in rail accidents. Currently there are 14,440 UMLCs in the railway network. In 2014-15, about 40% of the accidents occurred at UMLCs, and in 2015-16, about 28%.2 Between 2010 and 2013, the Ministry fell short of meeting their annual targets to eliminate UMLCs. Further, the target of eliminating 1,352 UMLCs was reduced by about 50% to 730 in 2014-15, and 820 in 2015-16.2 Implementation of audio-visual warnings at level crossings has been recommended to warn road users about approaching trains.2 These may include Approaching Train Warning Systems, and Train Actuated Warning Systems.2 The Union Budget 2017-18 proposes to eliminate all unmanned level crossings on broad gauge lines by 2020.
Casualties and compensation
In the last few years, Railways has paid an average compensation of Rs 3.03 crore every year for accidents (see figure below).[2]
Note: Compensation paid during a year relates to the cases settled and not to accidents/casualties during that year.
Consequential train accidents
Accidents in railways may or may not have a significant impact on the overall system. Consequential train accidents are those which have serious repercussions in terms of loss of human life or injury, damage to railway property or interruption to rail traffic. These include collisions, derailments, fire in trains, and similar accidents that have serious repercussions in terms of casualties and damage to property. These exclude cases of trespassing at unmanned railway crossings.
As seen in the figure below, the share of failure of railways staff is the biggest cause of consequential rail accidents. The number of rail accidents due to failure of reasons other than the railway staff (sabotage) has increased in the last few years.
Accidents due to failure of railway staff
It has been noted that more than half of the accidents are due to lapses on the part of railway staff.2 Such lapses include carelessness in working, poor maintenance, adoption of short-cuts, and non-observance of laid down safety rules and procedures. To address these issues, conducting a regular refresher course for each category of railway staff has been recommended.2
Accidents due to loco-pilots2,[3]
Accidents also occur due to signalling errors for which loco-pilots (train-operators) are responsible. With rail traffic increasing, loco-pilots encounter a signal every few kilometres and have to constantly be on high alert. Further, currently no technological support is available to the loco-pilots and they have to keep a vigilant watch on the signal and control the train accordingly.2 These Loco-pilots are over-worked as they have to be on duty beyond their stipulated working hours. This work stress and fatigue puts the life of thousands of commuters at risk and affects the safety of train operations.2 It has been recommended that loco-pilots and other related running staff should be provided with sound working conditions, better medical facilities and other amenities to improve their performance.2
Actions taken by Railways with regard to the recent train accident
According to news reports, the recent accident of Utkal Express in UP resulted in 22 casualties and over 150 injuries.[4] It has also been reported that following this incident, the Railways Ministry initiated action against certain officials (including a senior divisional engineer), and three senior officers (including a General Manager and a Railway Board Member).
The Committee on Restructuring of Railways had noted that currently each Railway zone (headed by a General Manager) is responsible for operation, management, and development of the railway system under its jurisdiction.[5] However, the power to make financial decisions does not rest with the zones and hence they do not possess enough autonomy to generate their own revenue, or take independent decisions.5
While the zones prepare their annual budget, the Railway Board provides the annual financial budget outlay for each of them. As a result of such budgetary control, the GM’s powers have been reduced leaving them with little independence in planning their operations.5
The Committee recommended that the General Managers must be fully empowered to take all necessary decisions independent of the Railway Board.5 Zonal Railways should also have full power for expenditure and re-appropriations and sanctions. This will make each Zonal Railway accountable for its transport output, profitability and safety under its jurisdiction.
Under-investment in railways leading to accidents
In 2012, a Committee headed by Mr. Anil Kakodkar had estimated that the total financial cost of implementing safety measures over the five-year period (2012-17) was likely be around Rs one lakh crore. In the Union Budget 2017-18, the creation of a Rashtriya Rail Sanraksha Kosh was proposed for passenger safety. It will have a corpus of Rs one lakh crore, which will be built over a five-year period (Rs 20,000 crore per year).
The Standing Committee on Railways had noted that slow expansion of rail network has put undue burden on the existing infrastructure leading to severe congestion and safety compromises.2 Since independence, while the rail network has increased by 23%, passenger and freight traffic over this network has increased by 1,344% and 1,642% respectively.2 This suggests that railway lines are severely congested. Further, under-investment in the sector has resulted in congested routes, inability to add new trains, reduction of train speeds, and more rail accidents.2 Therefore, avoiding such accidents in the future would also require significant investments towards capital and maintenance of rail infrastructure.2
Tags: railways, safety, accidents, finances, derailment, casualty, passengers, train
[1] Railways Year Book 2015-16, Ministry of Railways, http://www.indianrailways.gov.in/railwayboard/uploads/directorate/stat_econ/IRSP_2015-16/Year_Book_Eng/8.pdf.
[2] “12th Report: Safety and security in Railways”, Standing Committee on Railways, December 14, 2016, http://164.100.47.193/lsscommittee/Railways/16_Railways_12.pdf.
[3] Report of High Level Safety Review Committee, Ministry of Railways, February 17, 2012.
[4] “Utkal Express derailment: Four railway officials suspended as death toll rises to 22”, The Indian Express, August 20, 2017, http://indianexpress.com/article/india/utkal-express-train-derailment-four-railway-officers-suspended-suresh-prabhu-muzaffarnagar-22-dead-4805532/.
[5] Report of the Committee for Mobilization of Resources for Major Railway Projects and Restructuring of Railway Ministry and Railway Board, Ministry of Railways, June 2015, http://www.indianrailways.gov.in/railwayboard/uploads/directorate/HLSRC/FINAL_FILE_Final.pdf.
Mr. Ramnath Kovind completes his tenure as President in July. With the Election Commission of India expected to notify the election dates this week, we look at how India will elect its next President.
As the Head of the State, the President is a key part of Parliament. The President calls the two Houses of Parliament into session on the advice of the Council of Ministers. A Bill passed by the Lok Sabha and Rajya Sabha does not become a law unless assented to by the President. Further, when Parliament is not in session, the President holds the power to sign a law with immediate effect through an Ordinance.
Who elects the President?
The manner of election of the President is provided in Article 55 of the Constitution. Members of Parliament and Members of Legislative Assemblies (MPs and MLAs) including elected representatives from the Union Territories (UTs) of Delhi and Puducherry form the electoral college, which elects the President. At least 50 elected representatives must propose a candidate, who must then be seconded by 50 other electors to run for the President's office. Members of Legislative Councils and the 12 nominated members of Rajya Sabha do not participate in the voting process.
The history behind having proposers and seconders To discourage the practice, candidates had to secure at least 10 proposers and seconders each to contest the elections from the 1974 election onwards. A compulsory security deposit of Rs 2,500 was also introduced. The changes were brought in through an amendment to the Presidential and Vice-Presidential Act, 1952. In 1997, the Act was further amended to increase the security deposit to Rs 15,000 and the minimum number of proposers and seconders to 50 each. |
How are the votes calculated?
The Presidential election uses a special voting to tally the votes. A different voting weightage is assigned to an MP and an MLA. The value of each MLA's vote is determined based on the population of their state and the number of MLAs. For instance, an MLA from UP has a value of 208 while an MLA from Sikkim has 7 (see Table 1). Due to a Constitutional Amendment passed in 2002, the population of the state as per the 1971 census is taken for the calculation.
The value of an MP's vote is the sum of all votes of MLAs across the country divided by the number of elected MPs.
How will the numbers look in 2022?
In the 2017 Presidential elections, electors from 31 states and the UTs of Delhi and Puducherry participated. However, in 2019, with the Jammu and Kashmir (J&K) Reorganization Act, the number of states were reduced to 30. The J&K Assembly was dissolved as per the Act and a new legislature for the UT of J&K is yet to be reconstituted. UTs with legislatures were not originally part of the electoral college for the election of the President. The Constitution was amended in 1992 to specifically include the UTs of Delhi and Puducherry. Note that for MLAs from J&K to participate in future Presidential elections, a similar Constitutional amendment would be required to be passed by Parliament.
Based on the assumption that J&K is not included in the 2022 Presidential election, the total number of votes of MLAs in 2022 elections will have to be adjusted. The 87 Jammu and Kashmir MLAs must be removed from the total number of MLAs of 4,120. Jammu and Kashmir’s contributing vote share of 6,264 must also be reduced from the total vote share of 549,495. Adjusting for these changes, 4,033 MLAs will participate in the 2022 elections and the combined vote share of all MLAs will add up to 543,231.
Table 1: The value of votes of elected MLAs of different states at the 2017 Presidential Election
Name of State |
Number of Assembly seats |
Population (1971 Census) |
Value of vote of each MLA |
Total value of votes for the state (B x D) |
A |
B |
C |
D |
E |
Andhra Pradesh |
175 |
2,78,00,586 |
159 |
27,825 |
Arunachal Pradesh |
60 |
4,67,511 |
8 |
480 |
Assam |
126 |
1,46,25,152 |
116 |
14,616 |
Bihar |
243 |
4,21,26,236 |
173 |
42,039 |
Chhattisgarh |
90 |
1,16,37,494 |
129 |
11,610 |
Goa |
40 |
7,95,120 |
20 |
800 |
Gujarat |
182 |
2,66,97,475 |
147 |
26,754 |
Haryana |
90 |
1,00,36,808 |
112 |
10,080 |
Himachal Pradesh |
68 |
34,60,434 |
51 |
3,468 |
Jammu and Kashmir |
87 |
63,00,000 |
72 |
6,264 |
Jharkhand |
81 |
1,42,27,133 |
176 |
14,256 |
Karnataka |
224 |
2,92,99,014 |
131 |
29,344 |
Kerala |
140 |
2,13,47,375 |
152 |
21,280 |
Madhya Pradesh |
230 |
3,00,16,625 |
131 |
30,130 |
Maharashtra |
288 |
5,04,12,235 |
175 |
50,400 |
Manipur |
60 |
10,72,753 |
18 |
1,080 |
Meghalaya |
60 |
10,11,699 |
17 |
1,020 |
Mizoram |
40 |
3,32,390 |
8 |
320 |
Nagaland |
60 |
5,16,449 |
9 |
540 |
Odisha |
147 |
2,19,44,615 |
149 |
21,903 |
Punjab |
117 |
1,35,51,060 |
116 |
13,572 |
Rajasthan |
200 |
2,57,65,806 |
129 |
25,800 |
Sikkim |
32 |
2,09,843 |
7 |
224 |
Tamil Nadu |
234 |
4,11,99,168 |
176 |
41,184 |
Telangana |
119 |
1,57,02,122 |
132 |
15,708 |
Tripura |
60 |
15,56,342 |
26 |
1,560 |
Uttarakhand |
70 |
44,91,239 |
64 |
4,480 |
Uttar Pradesh |
403 |
8,38,49,905 |
208 |
83,824 |
West Bengal |
294 |
4,43,12,011 |
151 |
44,394 |
NCT of Delhi |
70 |
40,65,698 |
58 |
4,060 |
Puducherry |
30 |
4,71,707 |
16 |
480 |
Total |
4,120 |
54,93,02,005 |
|
5,49,495 |
Source: Election Commission of India (2017); PRS.
The value of an MP’s vote correspondingly will change from 708 in 2017 to 700 in 2022.
Value of one MP's vote = Total value of all votes of MLAs = 543231 = 700
Total number of elected MPs 776
Note that the value of an MP’s vote is rounded off to the closest whole number. This brings the combined value of the votes of all MPs to 543,200 (700 x 776).
What is the number of votes required to win?
The voting for the Presidential elections is done through the system of single transferable vote. In this system, electors rank the candidates in the order of their preference. The winning candidate must secure more than half of the total value of valid votes to win the election. This is known as the quota.
Assuming that each elector casts his vote and that each vote is valid:
Quota = Total value of MP’s votes + Total value of MLA’s votes + 1
2
= 543200 + 543231 +1 = 1086431 +1 = 543,216
2 2
The anti-defection law which disallows MPs from crossing the party line does not apply to the Presidential election. This means that the MPs and MLAs can keep their ballot secret.
The counting of votes takes place in rounds. In Round 1, only the first preference marked on each ballot is counted. If any of the candidates secures the quota at this stage, he or she is declared the winner. If no candidate secures the quota in the first round, then another round of counting takes place. In this round, the votes cast to the candidate who secures the least number of votes in Round 1 are transferred. This means that these votes are now added to the second preference candidate marked on each ballot. This process is repeated till only one candidate remains. Note that it is not compulsory for an elector to mark his preference for all candidates. If no second preference is marked, then the ballots are treated as exhausted ballots in Round 2 and are not counted further.
The fifth Presidential election which elected Mr. VV Giri is the only instance when a candidate did not secure the quota in the first round. The second preference votes were then evaluated and Mr. Giri secured 4,20,077 of the 8,36,337 votes and was declared the President.
The only President of India to win unopposed |