Safety has been one of the biggest concerns in the Indian Railways system.  While the number of accidents have gone down over the last few years, the number still remains over 100 accidents a year.  In light of the recent train accidents in Uttar Pradesh (UP), we present some details around accidents and safety in the Indian Railways.

Causes of rail accidents

The number of rail accidents has declined from 325 in 2003-04 to 106 in 2015-16.[1]  The number of rail accidents as per the cause are shown in the graph below.  In 2015-16, majority of the accidents were caused due to derailments (60%), followed by accidents at level crossings (33%).1  In the last decade, accidents caused due to both these causes have reduced by about half.  According to news reports, the recent railway accidents in UP were caused due to derailment of coaches.

1

Derailments

Between 2003-04 and 2015-16, derailments were the second highest reason for casualties.2  The Standing Committee on Railways, when examining the safety in railways, had noted that one of the reasons for derailments is defect in the track or coaches.  Of the total track length of 1,14,907 kms in the country, 4,500 kms should be renewed annually.2  However, in 2015-16, of the 5,000 km of track length due for renewal, only 2,700 km was targeted to be renewed.2  The Committee had recommended that Indian Railways should switch completely to the Linke Hoffman Busch (LHB) coaches as they do not pile upon each other during derailments and hence cause lesser casualties.2

Un-manned level crossings

Un-manned level crossings (UMLCs) continue to be the biggest cause of casualties in rail accidents.  Currently there are 14,440 UMLCs in the railway network.  In 2014-15, about 40% of the accidents occurred at UMLCs, and in 2015-16, about 28%.2  Between 2010 and 2013, the Ministry fell short of meeting their annual targets to eliminate UMLCs.  Further, the target of eliminating 1,352 UMLCs was reduced by about 50% to 730 in 2014-15, and 820 in 2015-16.2  Implementation of audio-visual warnings at level crossings has been recommended to warn road users about approaching trains.2  These may include Approaching Train Warning Systems, and Train Actuated Warning Systems.2  The Union Budget 2017-18 proposes to eliminate all unmanned level crossings on broad gauge lines by 2020.

Casualties and compensation

In the last few years, Railways has paid an average compensation of Rs 3.03 crore every year for accidents (see figure below).[2]

2

Note: Compensation paid during a year relates to the cases settled and not to accidents/casualties during that year.

Consequential train accidents

Accidents in railways may or may not have a significant impact on the overall system.  Consequential train accidents are those which have serious repercussions in terms of loss of human life or injury, damage to railway property or interruption to rail traffic.  These include collisions, derailments, fire in trains, and similar accidents that have serious repercussions in terms of casualties and damage to property.  These exclude cases of trespassing at unmanned railway crossings.

As seen in the figure below, the share of failure of railways staff is the biggest cause of consequential rail accidents.  The number of rail accidents due to failure of reasons other than the railway staff (sabotage) has increased in the last few years.

3

Accidents due to failure of railway staff

It has been noted that more than half of the accidents are due to lapses on the part of railway staff.2  Such lapses include carelessness in working, poor maintenance, adoption of short-cuts, and non-observance of laid down safety rules and procedures.  To address these issues, conducting a regular refresher course for each category of railway staff has been recommended.2

Accidents due to loco-pilots2,[3]

Accidents also occur due to signalling errors for which loco-pilots (train-operators) are responsible.  With rail traffic increasing, loco-pilots encounter a signal every few kilometres and have to constantly be on high alert.  Further, currently no technological support is available to the loco-pilots and they have to keep a vigilant watch on the signal and control the train accordingly.2 These Loco-pilots are over-worked as they have to be on duty beyond their stipulated working hours.  This work stress and fatigue puts the life of thousands of commuters at risk and affects the safety of train operations.2  It has been recommended that loco-pilots and other related running staff should be provided with sound working conditions, better medical facilities and other amenities to improve their performance.2

Actions taken by Railways with regard to the recent train accident

According to news reports, the recent accident of Utkal Express in UP resulted in 22 casualties and over 150 injuries.[4]  It has also been reported that following this incident, the Railways Ministry initiated action against certain officials (including a senior divisional engineer), and three senior officers (including a General Manager and a Railway Board Member).

The Committee on Restructuring of Railways had noted that currently each Railway zone (headed by a General Manager) is responsible for operation, management, and development of the railway system under its jurisdiction.[5]  However, the power to make financial decisions does not rest with the zones and hence they do not possess enough autonomy to generate their own revenue, or take independent decisions.5

While the zones prepare their annual budget, the Railway Board provides the annual financial budget outlay for each of them.  As a result of such budgetary control, the GM’s powers have been reduced leaving them with little independence in planning their operations.5

The Committee recommended that the General Managers must be fully empowered to take all necessary decisions independent of the Railway Board.5  Zonal Railways should also have full power for expenditure and re-appropriations and sanctions.  This will make each Zonal Railway accountable for its transport output, profitability and safety under its jurisdiction.

Under-investment in railways leading to accidents

In 2012, a Committee headed by Mr. Anil Kakodkar had estimated that the total financial cost of implementing safety measures over the five-year period (2012-17) was likely be around Rs one lakh crore.  In the Union Budget 2017-18, the creation of a Rashtriya Rail Sanraksha Kosh was proposed for passenger safety.  It will have a corpus of Rs one lakh crore, which will be built over a five-year period (Rs 20,000 crore per year).

The Standing Committee on Railways had noted that slow expansion of rail network has put undue burden on the existing infrastructure leading to severe congestion and safety compromises.2  Since independence, while the rail network has increased by 23%, passenger and freight traffic over this network has increased by 1,344% and 1,642% respectively.2  This suggests that railway lines are severely congested.  Further, under-investment in the sector has resulted in congested routes, inability to add new trains, reduction of train speeds, and more rail accidents.2  Therefore, avoiding such accidents in the future would also require significant investments towards capital and maintenance of rail infrastructure.2

Tags: railways, safety, accidents, finances, derailment, casualty, passengers, train

[1] Railways Year Book 2015-16, Ministry of Railways, http://www.indianrailways.gov.in/railwayboard/uploads/directorate/stat_econ/IRSP_2015-16/Year_Book_Eng/8.pdf.

[2] “12th Report: Safety and security in Railways”, Standing Committee on Railways, December 14, 2016, http://164.100.47.193/lsscommittee/Railways/16_Railways_12.pdf.

[3] Report of High Level Safety Review Committee, Ministry of Railways, February 17, 2012.

[4] “Utkal Express derailment: Four railway officials suspended as death toll rises to 22”, The Indian Express, August 20, 2017, http://indianexpress.com/article/india/utkal-express-train-derailment-four-railway-officers-suspended-suresh-prabhu-muzaffarnagar-22-dead-4805532/.

[5] Report of the Committee for Mobilization of Resources for Major Railway Projects and Restructuring of Railway Ministry and Railway Board, Ministry of Railways, June 2015, http://www.indianrailways.gov.in/railwayboard/uploads/directorate/HLSRC/FINAL_FILE_Final.pdf.

Several Rajya Sabha seats go to elections this year. The President and the Vice-President are also due to be elected by August. We analyse the impact of the recent State Assembly elections on the composition of the Rajya Sabha and the outcome of the Presidential polls. Rajya Sabha - How will its composition change? Since Rajya Sabha members are elected by the elected members of State Legislative Assemblies, a change in the composition of State Assemblies can affect the composition of Rajya Sabha.  A total of 61 Rajya Sabha seats are up for election in April and July.  This includes 10 seats from Uttar Pradesh and 1 seat from Uttarakhand. In light of the recent Assembly elections, we work out two scenarios to estimate the composition of Rajya Sabha in 2012. Members of Rajya Sabha are elected through the system of proportional representation by means of the Single Transferable Vote (STV). In an STV election, a candidate is required to achieve a certain minimum number of votes (called the 'quota') to be elected.  (For more details on the STV system, click here) For instance, in the case of Uttar Pradesh (UP) 10 Rajya Sabha seats go to election this year.  Candidates will be elected to these 10 seats by the 403 elected MLAs of the Uttar Pradesh State Assembly.  Each MLA will rank the candidates based on his/ her preference. After successive rounds of elimination, candidates who are able to secure at least 37  {or 403/(10+1) } votes will be declared elected. In the new UP Assembly, Samajwadi  Party (SP) has a total strength of 224 members. As a result, SP can elect at least 6 (or 224/37) Rajya Sabha MPs of its choice.  BSP's strength of 80 will allow it to elect 2 (or 80/37) MPs to Rajya Sabha. Similarily, the BJP with a strength of 47 MLAs can have one candidate of its choice elected to the Rajya Sabha.  This leaves 1 seat.  The fate of this seat depends on the alliances that may be formed since no other party in UP has 37 or more seats in the Assembly.  If the Congress (28 seats) and RLD (9 seats) join hands, they may be able to elect a candidate of their choice. We build two scenarios which give the likely range of seats for the major coalitions and parties. The actual result will likely fall between these scenarios, depending on alliances for each election. Of the two scenarios, Scenario II is better for the UPA. It is based on the assumption that the UPA is able to put together the necessary support/ alliances to get its candidates elected to seats with indeterminate status.  Scenario I is based on the assumption that the UPA is not able to put together the required support. As a result, the seats in question get allocated to candidates from other parties/ coalitions. (See Notes for the composition of the coalitions) Composition of Rajya Sabha

Party/ Coalition Current composition Scenario I Scenario II
Total seats

245

245

245

UPA

93

95

98

NDA

66

67

65

Left

19

14

14

BSP

18

15

15

SP

5

9

9

BJD

6

8

7

AIADMK

5

5

5

Nominated

7

12

12

Others

21

20

20

Vacant

5

0

0

It appears that there would not be a major change in the composition of the Rajya Sabha. Which party's candidate is likely to become the next President? The next Presidential election will be held in June or July.  The electoral college for the Presidential election consists of the elected members of Lok Sabha, Rajya Sabha and all Legislative Assemblies. Each MP/ MLA’s vote has a pre-determined value based on the population they represent. For instance, an MP's vote has a value of 708, an MLA from UP has a vote value of 208 and an MLA from Sikkim has a vote value of 7. (Note that all MPs, irrespective of the constituency or State they represent, have equal vote value) As is evident, changes in the composition of Assemblies in larger States such as UP can have a major impact on the outcome of the Presidential election. The elections to the office of the President are held through the system of proportional representation by means of STV (same as in the case of Rajya Sabha).  The winning candidate must secure at least 50% of the total value of votes polled.  (For details, refer to this Election Commission document). By this calculation, a candidate will need at least 5,48,507 votes to be elected as the President. If the UPA were to vote as a consolidated block, its vote tally would reach 4,50,555 votes under Scenario II (the one that is favourable for the UPA).  Therefore, the UPA will have to seek alliances if it wants a candidate of its choice to be elected to the office of the President. Scenarios for Presidential elections (figures represent the value of votes available with each party/ coalition)

Party/ Coalition Scenario I Scenario II
UPA

4,48,431

4,50,555

NDA

3,05,328

3,03,912

Left

51,574

51,574

BSP

43,723

43,723

SP

69,651

69,651

BJD

30,923

30,215

AIADMK

36,216

36,216

Others

1,11,166

1,11,166

Total

10,97,012

10,97,012

Minimum required to be elected

5,48,507

5,48,507

What about the Vice-President? Elections to the office of the Vice-President (VP) will be held in July or August.  The electoral college will consist of all members of Lok Sabha and Rajya Sabha (i.e. both elected and nominated). Unlike the Presidential elections, all votes will have an equal value of one. Like the President, the VP is also elected through the system of proportional representation by means of STV.  The winning candidate must secure at least 50% of the total value of votes polled. Presently, two seats are vacant in the Lok Sabha. If we exclude these from our analysis, we find that a candidate will need at least 395 votes to be elected as the VP.  Under our best case scenario, the UPA holds 363 votes in the forthcoming VP elections. As is the case with Presidential elections, the UPA will have to seek alliances to get a candidate of its choice elected to the office of the Vice-President. Scenarios for VP elections (figures represent the value of votes available with each party/ coalition)

Party/ Coalition

Scenario I

Scenario II

UPA

360

363

NDA

216

214

Left

38

38

BSP

36

36

SP

31

31

BJD

22

21

AIADMK

14

14

Nominated

14

14

Others

57

57

Total

788

788

Minimum required to be elected

395

395

Notes: [1] UPA: Congress, Trinamool, DMK, NCP,Rashtriya Lok Dal, J&K National Conference, Muslim League Kerala State Committee, Kerala Congress (M), All India Majlis-e-Ittehadul Muslimeen, Sikkim Democratic Front, Praja Rajyam Party, Viduthalai Chiruthaigal Katchi [2] NDA: BJP, JD(U), Shiv Sena, Shiromani Akali Dal [3] Left: CPI(M), CPI, Revolutionary Socialist Party,All India Forward Bloc