"No one can ignore Odisha's demand. It deserves special category status. It is a genuine right," said Odisha Chief Minister, Naveen Patnaik, earlier this month. The Odisha State assembly has passed a resolution requesting special category status and their demands follow Bihar's recent claim for special category status. The concept of a special category state was first introduced in 1969 when the 5th Finance Commission sought to provide certain disadvantaged states with preferential treatment in the form of central assistance and tax breaks. Initially three states Assam, Nagaland and Jammu & Kashmir were granted special status but since then eight more have been included (Arunachal Pradesh,  Himachal Pradesh,  Manipur, Meghalaya, Mizoram, Sikkim, Tripura and Uttarakhand). The rationale for special status is that certain states, because of inherent features, have a low resource base and cannot mobilize resources for development. Some of the features required for special status are: (i) hilly and difficult terrain; (ii) low population density or sizeable share of tribal population; (iii) strategic location along borders with neighbouring countries; (iv) economic and infrastructural backwardness; and (v) non-viable nature of state finances. [1. Lok Sabha unstarred question no. 667, 27 Feb, 2013, Ministry of Planning] The decision to grant special category status lies with the National Development Council, composed of the Prime Minster, Union Ministers, Chief Ministers and members of the Planning Commission, who guide and review the work of the Planning Commission. In India, resources can be transferred from the centre to states in many ways (see figure 1). The Finance Commission and the Planning Commission are the two institutions responsible for centre-state financial relations.

Figure 1: Centre-state transfers (Source: Finance Commission, Planning Commission, Budget documents, PRS)

 

Planning Commission and Special Category The Planning Commission allocates funds to states through central assistance for state plans. Central assistance can be broadly split into three components: Normal Central Assistance (NCA), Additional Central Assistance (ACA) and Special Central Assistance. NCA, the main assistance for state plans, is split to favour special category states: the 11 states get 30% of the total assistance while the other states share the remaining 70%.  The nature of the assistance also varies for special category states; NCA is split into 90% grants and 10% loans for special category states, while the ratio between grants and loans is 30:70 for other states. For allocation among special category states, there are no explicit criteria for distribution and funds are allocated on the basis of the state's plan size and previous plan expenditures. Allocation between non special category states is determined by the Gadgil Mukherjee formula which gives weight to population (60%), per capita income (25%), fiscal performance (7.5%) and special problems (7.5%).  However, as a proportion of total centre-state transfers NCA typically accounts for a relatively small portion (around 5% of total transfers in 2011-12). Special category states also receive specific assistance addressing features like hill areas, tribal sub-plans and border areas. Beyond additional plan resources, special category states can enjoy concessions in excise and customs duties, income tax rates and corporate tax rates as determined by the government.  The Planning Commission also allocates funds for ACA (assistance for externally aided projects and other specific project) and funds for Centrally Sponsored Schemes (CSS). State-wise allocation of both ACA and CSS funds are prescribed by the centre. The Finance Commission Planning Commission allocations can be important for states, especially for the functioning of certain schemes, but the most significant centre-state transfer is the distribution of central tax revenues among states. The Finance Commission decides the actual distribution and the current Finance Commission have set aside 32.5% of central tax revenue for states. In 2011-12, this amounted to Rs 2.5 lakh crore (57% of total transfers), making it the largest transfer from the centre to states. In addition, the Finance Commission recommends the principles governing non-plan grants and loans to states.  Examples of grants would include funds for disaster relief, maintenance of roads and other state-specific requests.  Among states, the distribution of tax revenue and grants is determined through a formula accounting for population (25%), area (10%), fiscal capacity (47.5%) and fiscal discipline (17.5%).  Unlike the Planning Commission, the Finance Commission does not distinguish between special and non special category states in its allocation.

Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts.  It had first recommended these names earlier this year and in August last year, but these appointments were not made.  The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts).  Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases.  As of today, more than four crore cases are pending across all courts in India.   In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.

High vacancy of judges across courts

Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges.  Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually.  However, vacancies persist due to insufficient appointments (see Figures 1 and 2).  Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts). 

Figure 1: Vacancy of judges in High Courts

Figure 2: Vacancy of judges in subordinate courts

image

image

Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS.

As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34).  Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098).  Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges.  In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3).  The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled. 

Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021)

image

Source: Vacancy Statement, Department of Justice; PRS.

 

 

 

 

 

 

 

 

 

Appointments of High Court judges are guided by a memorandum of procedure.  As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs.  However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts.  Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court.  No timeline is prescribed for this stage of the appointment process.  In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.

As of today, over 3.6 crore cases are pending before subordinate courts in India.  As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts.  Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4).  Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.

For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.

Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)

image

Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS.

 

How many judges do we need?

The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary.  Lack of adequate number of judges means a greater workload per judge.  Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts.  Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1). 

Table 1: Methods recommended for calculating the required number of judges for subordinate courts

Method of calculation

Recommendation and its status

Judge-to-population ratio: optimum number of judges per million population

The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people.  This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002).  For 2020, the judge-to-population ratio was 21 judges per million population.     Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts.

Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge

The Law Commission of India (2014) proposed this method.  It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions.

Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions

The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method.     It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts.     In 2017, the Supreme Court accepted this model.

Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study

Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts.  It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court.  The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi.

Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.