In Budget Session 2018, Rajya Sabha has planned to examine the working of four ministries. The Ministry of Drinking Water and Sanitation is one of the ministries listed for discussion. In this post, we look at the key schemes being implemented by the Ministry and their status.
What are the key functions of the Ministry of Drinking Water and Sanitation?
As per the Constitution, supply of water and sanitation are state subjects which means that states regulate and provide these services. The Ministry of Drinking Water and Sanitation is primarily responsible for policy planning, funding, and coordination of programs for: (i) safe drinking water; and (ii) sanitation, in rural areas. From 1999 till 2011, the Ministry operated as a Department under the Ministry of Rural Development. In 2011, the Department was made an independent Ministry. Presently, the Ministry oversees the implementation of two key schemes of the government: (i) Swachh Bharat Mission-Gramin (SBM-G), and (ii) National Rural Drinking Water Programme (NRDWP).
How have the finances and spending priorities of the Ministry changed over time?
In the Union Budget 2018-19, the Ministry has been allocated Rs 22,357 crore. This is a decrease of Rs 1,654 crore (7%) over the revised expenditure of 2017-18. In 2015-16, the Ministry over-shot its budget by 178%. Consequently, the allocation in 2016-17 was more than doubled (124%) to Rs 14,009 crore.
In recent years, the priorities of the Ministry have seen a shift (see Figure 1). The focus has been on providing sanitation facilities in rural areas, mobilising behavioural change to increase usage of toilets, and consequently eliminating open defecation. However, this has translated into a decrease in the share of allocation towards drinking water (from 87% in 2009-10 to 31% in 2018-19). In the same period, the share of allocation to rural sanitation has increased from 13% to 69%.
What has been the progress under Swacch Bharat Mission- Gramin?
The Swachh Bharat Mission was launched on October 2, 2014 with an aim to achieve universal sanitation coverage, improve cleanliness, and eliminate open defecation in the country by October 2, 2019.
Expenditure on SBM-G: In 2018-19, Rs 15,343 crore has been allocated towards SBM-G. The central government allocation to SBM-G for the five year period from 2014-15 to 2018-19 has been estimated to be Rs 1,00,447 crore. Of this, up to 2018-19, Rs 52,166 crore (52%) has been allocated to the scheme. This implies that 48% of the funds are still left to be released before October 2019. 
Construction of Individual Household Latrines (IHHLs): For construction of IHHLs, funds are shared between the centre and states in the 60:40 ratio. Construction of IHHLs account for the largest share of total expenditure under the scheme (97%-98%). Although the number of toilets constructed each year has increased, the pace of annual growth of constructing these toilets has come down. In 2015-16, the number of toilets constructed was 156% higher than the previous year. This could be due to the fact that 2015-16 was the first full year of implementation of the scheme. The growth in construction of new toilets reduced to 74% in 2016-17, and further to 4% in 2017-18.
As of February 2018, 78.8% of households in India had a toilet. This implies that 15 crore toilets have been constructed so far. However, four crore more toilets need to be construced in the next 20 months for the scheme to achieve its target by 2019.
Open Defecation Free (ODF) villages: Under SBM-G, a village is ODF when: (i) there are no visible faeces in the village, and (ii) every household as well as public/community institution uses safe technology options for faecal disposal. After a village declares itself ODF, states are required to carry out verification of the ODF status of such a village. This includes access to a toilet facility and its usage, and safe disposal of faecal matter through septic tanks. So far, out of all villages in the country, 72% have been verified as ODF. This implies that 28% villages are left to be verified as ODF for the scheme to achieve its target by 2019.
Information, Education and Communication (IEC) activities: As per the SBM-G guidelines, 8% of funds earmarked for SBM-G in a year should be utilised for IEC activities. These activities primarily aim to mobilise behavioural change towards the use of toilets among people. However, allocation towards this component has remained in the 1%-4% range. In 2017-18, Rs 229 crore is expected to be spent, amounting to 2% of total expenditure.
What is the implementation status of the National Rural Drinking Water Programme?
The National Rural Drinking Water Programme (NRDWP) aims at assisting states in providing adequate and safe drinking water to the rural population in the country. In 2018-19, the scheme has been allocated Rs 7,000 crore, accounting for 31% of the Ministry’s finances.
Coverage under the scheme: As of August 2017, 96% of rural habitations have access to safe drinking water. In 2011, the Ministry came out with a strategic plan for the period 2011-22. The plan identified certain standards for coverage of habitations with water supply, including targets for per day supply of drinking water. As of February 2018, 74% habitations are fully covered (receiving 55 litres per capita per day), and 22% habitations are partially covered (receiving less than 55 litres per capita per day). The Ministry aims to cover 90% rural households with piped water supply and 80% rural households with tap connections by 2022. The Estimates Committee of Parliament (2015) observed that piped water supply was available to only 47% of rural habitations, out of which only 15% had household tap connections.
Contamination of drinking water: It has been noted that NRDWP is over-dependant on ground water. However, ground water is contaminated in over 20 states. For instance, high arsenic contamination has been found in 68 districts of 10 states. These states are Haryana, Punjab, Uttar Pradesh, Bihar, Jharkhand, Chhattisgarh, West Bengal, Assam, Manipur, and Karnataka.
Chemical contamination of ground water has also been reported due to deeper drilling for drinking water sources. It has been recommended that out of the total funds for NRDWP, allocation for water quality monitoring and surveillance should not be less than 5%. Presently, it is 3% of the total funds. It has also been suggested that water quality laboratories for water testing should be set up throughout the country.
On October 18, it was reported in the news that the central government has been given more time for framing rules under the Citizenship (Amendment) Act, 2019. The President had given assent to this Act in December 2019 and the Act came into force in January 2020. Similarly, about two years have passed since the new labour codes were passed by Parliament, and the final Rules are yet to be published. This raises the question how long the government can take to frame Rules and what is the procedure guiding this. In this blog, we discuss the same.
Under the Constitution, the Legislature has the power to make laws and the Executive is responsible for implementing them. Often, the Legislature enacts a law covering the general principles and policies, and delegates the power to the Executive for specifying certain details for the implementation of a law. For example, the Citizenship Amendment Act provides who will be eligible for citizenship. The certificate of registration or naturalization to a person will be issued, subject to conditions, restrictions, and manner as may be prescribed by the central government through Rules. Delay in framing Rules results in delay in implementing the law, since the necessary details are not available. For example, new labour codes provide a social security scheme for gig economy workers such as Swiggy and Zomato delivery persons and Uber and Ola drivers. These benefits as per these Codes are yet to be rolled out as the Rules are yet to be notified.
Timelines and checks and balances for adherence
Each House of Parliament has a Committee of Members to examine Rules, Regulations, and government orders in detail called the Committee on Subordinate Legislation. Over the years, the recommendations of these Committees have shaped the evolution of the procedure and timelines for framing subordinate legislation. These are reflected in the Manual of Parliamentary Procedures issued by the Ministry of Parliamentary Affairs, which provides detailed guidelines.
Ordinarily, Rules, Regulations, and bye-laws are to be framed within six months from the date on which the concerned Act came into force. Post that, the concerned Ministry is required to seek an extension from the Parliamentary Committees on Subordinate Legislation. The reason for the extension needs to be stated. Such extensions may be granted for a maximum period of three months at a time. For example, in case of Rules under the Citizenship Amendment Act, 2019, at an earlier instance, an extension was granted on account of the onset of the COVID-19 pandemic.
|
Activity |
Timeline |
|
|
|
|
|
|
To ensure monitoring, every Ministry is required to prepare a quarterly report on the status of subordinate legislation not framed and share it with the Ministry of Law and Justice. These reports are not available in the public domain.
Recommendations to address delays
Over the years, the Subordinate Legislation Committees in both Houses have observed multiple instances of non-adherence to the above timelines by various Ministries. To address this, they have made the following key recommendations:
Are all Rules under an Act required to be framed?
Usually, the expressions used in an Act are “The Central Government may, by notification, make rules for carrying out the provisions of this Act.”, or “as may be prescribed”. Hence, it may appear that the laws aim to enable rule-making instead of mandate rule-making. However, certain provisions of an Act cannot be brought into force if the required details have not been prescribed under the Rules. This makes the implementation of the Act consequent to the publication of respective Rules. For example, the Criminal Procedure (Identification) Act, 2022 enables the police and certain other persons to collect identity-related information about certain persons. It provides that the manner of collection of such information may be specified by the central government. Unless the manner is prescribed, such collection cannot take place.
That said, some other rule-making powers may be enabling in nature and subject to discretion by the concerned Ministry. In 2016, Rajya Sabha Committee on Subordinate Legislation examined the status of Rules and Regulations to be framed under the Energy Conservation Act, 2001. It observed that the Ministry of Power had held that two Rules and three Regulations under this Act were not necessary. The Ministry of Law and Justice had opined that those deemed not necessary were enabling provisions meant for unforeseen circumstances. The Rajya Sabha Committee (2016) had recommended that where the Ministry does not feel the need for framing subordinate legislation, the Minister should table a statement in Parliament, stating reasons for such a conclusion.
Some key issues related to subordinate legislation
The Legislature delegates the power to specify details for the implementation of a law to the Executive through powers for framing subordinate legislation. Hence, it is important to ensure these are well-scrutinised so that they are within the limits envisaged in the law.
See here for our recently published analysis of the Criminal Procedure (Identification) Rules, 2022, notified in September 2022. Also, check out PRS analysis of:
