In Budget Session 2018, Rajya Sabha has planned to examine the working of four ministries. The Ministry of Drinking Water and Sanitation is one of the ministries listed for discussion. In this post, we look at the key schemes being implemented by the Ministry and their status.
What are the key functions of the Ministry of Drinking Water and Sanitation?
As per the Constitution, supply of water and sanitation are state subjects which means that states regulate and provide these services. The Ministry of Drinking Water and Sanitation is primarily responsible for policy planning, funding, and coordination of programs for: (i) safe drinking water; and (ii) sanitation, in rural areas. From 1999 till 2011, the Ministry operated as a Department under the Ministry of Rural Development. In 2011, the Department was made an independent Ministry. Presently, the Ministry oversees the implementation of two key schemes of the government: (i) Swachh Bharat Mission-Gramin (SBM-G), and (ii) National Rural Drinking Water Programme (NRDWP).
How have the finances and spending priorities of the Ministry changed over time?
In the Union Budget 2018-19, the Ministry has been allocated Rs 22,357 crore. This is a decrease of Rs 1,654 crore (7%) over the revised expenditure of 2017-18. In 2015-16, the Ministry over-shot its budget by 178%. Consequently, the allocation in 2016-17 was more than doubled (124%) to Rs 14,009 crore.
In recent years, the priorities of the Ministry have seen a shift (see Figure 1). The focus has been on providing sanitation facilities in rural areas, mobilising behavioural change to increase usage of toilets, and consequently eliminating open defecation. However, this has translated into a decrease in the share of allocation towards drinking water (from 87% in 2009-10 to 31% in 2018-19). In the same period, the share of allocation to rural sanitation has increased from 13% to 69%.
What has been the progress under Swacch Bharat Mission- Gramin?
The Swachh Bharat Mission was launched on October 2, 2014 with an aim to achieve universal sanitation coverage, improve cleanliness, and eliminate open defecation in the country by October 2, 2019.
Expenditure on SBM-G: In 2018-19, Rs 15,343 crore has been allocated towards SBM-G. The central government allocation to SBM-G for the five year period from 2014-15 to 2018-19 has been estimated to be Rs 1,00,447 crore. Of this, up to 2018-19, Rs 52,166 crore (52%) has been allocated to the scheme. This implies that 48% of the funds are still left to be released before October 2019. 
Construction of Individual Household Latrines (IHHLs): For construction of IHHLs, funds are shared between the centre and states in the 60:40 ratio. Construction of IHHLs account for the largest share of total expenditure under the scheme (97%-98%). Although the number of toilets constructed each year has increased, the pace of annual growth of constructing these toilets has come down. In 2015-16, the number of toilets constructed was 156% higher than the previous year. This could be due to the fact that 2015-16 was the first full year of implementation of the scheme. The growth in construction of new toilets reduced to 74% in 2016-17, and further to 4% in 2017-18.
As of February 2018, 78.8% of households in India had a toilet. This implies that 15 crore toilets have been constructed so far. However, four crore more toilets need to be construced in the next 20 months for the scheme to achieve its target by 2019.
Open Defecation Free (ODF) villages: Under SBM-G, a village is ODF when: (i) there are no visible faeces in the village, and (ii) every household as well as public/community institution uses safe technology options for faecal disposal. After a village declares itself ODF, states are required to carry out verification of the ODF status of such a village. This includes access to a toilet facility and its usage, and safe disposal of faecal matter through septic tanks. So far, out of all villages in the country, 72% have been verified as ODF. This implies that 28% villages are left to be verified as ODF for the scheme to achieve its target by 2019.
Information, Education and Communication (IEC) activities: As per the SBM-G guidelines, 8% of funds earmarked for SBM-G in a year should be utilised for IEC activities. These activities primarily aim to mobilise behavioural change towards the use of toilets among people. However, allocation towards this component has remained in the 1%-4% range. In 2017-18, Rs 229 crore is expected to be spent, amounting to 2% of total expenditure.
What is the implementation status of the National Rural Drinking Water Programme?
The National Rural Drinking Water Programme (NRDWP) aims at assisting states in providing adequate and safe drinking water to the rural population in the country. In 2018-19, the scheme has been allocated Rs 7,000 crore, accounting for 31% of the Ministry’s finances.
Coverage under the scheme: As of August 2017, 96% of rural habitations have access to safe drinking water. In 2011, the Ministry came out with a strategic plan for the period 2011-22. The plan identified certain standards for coverage of habitations with water supply, including targets for per day supply of drinking water. As of February 2018, 74% habitations are fully covered (receiving 55 litres per capita per day), and 22% habitations are partially covered (receiving less than 55 litres per capita per day). The Ministry aims to cover 90% rural households with piped water supply and 80% rural households with tap connections by 2022. The Estimates Committee of Parliament (2015) observed that piped water supply was available to only 47% of rural habitations, out of which only 15% had household tap connections.
Contamination of drinking water: It has been noted that NRDWP is over-dependant on ground water. However, ground water is contaminated in over 20 states. For instance, high arsenic contamination has been found in 68 districts of 10 states. These states are Haryana, Punjab, Uttar Pradesh, Bihar, Jharkhand, Chhattisgarh, West Bengal, Assam, Manipur, and Karnataka.
Chemical contamination of ground water has also been reported due to deeper drilling for drinking water sources. It has been recommended that out of the total funds for NRDWP, allocation for water quality monitoring and surveillance should not be less than 5%. Presently, it is 3% of the total funds. It has also been suggested that water quality laboratories for water testing should be set up throughout the country.
The counting of votes for General Election 2019, which concluded on Sunday, will begin tomorrow, i.e., 23rd May at 8 AM. The election was conducted in 7 phases for 543 constituencies of Lok Sabha. The Election Commission of India (ECI) uses Electronic Voting Machines (EVM) to conduct elections. Since 2000, ECI has conducted 113 assembly elections and three general elections using EVMs.[1] Voter Verified Paper Audit Trail (VVPAT) system was added to EVMs in 2013 to increase transparency and improve voter confidence in the system. The VVPAT system generates a printed paper slip bearing the name and election symbol of the candidate. On April 8, 2019, Supreme Court instructed the ECI that printed VVPAT slips from randomly selected five polling stations in each assembly segment of a parliamentary constituency should be matched with EVMs.[2] In this blog, we explain the election counting process in India.
Who is responsible for counting the votes?
The Returning Officer (RO) is responsible for conducting elections in a constituency, which also includes counting of votes.[3] The RO is an officer of the government or a local authority nominated by the ECI for each constituency in consultation with the state government.[4]
Where does the counting take place?
The RO decides the place where the votes will be counted for the parliamentary constituency. The date and time of counting is fixed by the ECI. Ideally counting of votes for a constituency should be done at one place, preferably at the Headquarter of the RO in that constituency. It should be performed under the direct supervision of the RO. However, each Parliamentary Constituency has multiple assembly segments. In this situation, counting can take place at different locations for various assembly segments under the direct supervision of an Assistant Returning Officer (ARO).
Layout of the Counting Hall
Page 431, Handbook for Returning Officer Document 23 Edition 1, Election Commission of India
Counting of votes for each assembly segment of a parliamentary constituency is performed in a single hall. In each round of counting, votes from 14 EVMs are counted. In case of simultaneous parliamentary and assembly elections, such as Odisha, the first seven tables are used for counting votes for assembly elections, and the rest for parliamentary elections.
In constituencies with a large number of candidates, it may not be possible to count votes for all candidates in a single hall without overcrowding it. In such a situation, the number of counting halls or tables can be increased with the prior permission of the ECI. A hall can also be used for counting votes of another assembly segment after the results of the first segment are declared. However, counting may be done for only one assembly segment in a hall at any point of time.
What is the counting process?
Counting is performed by counting supervisors appointed by the RO. Counting staff is appointed through a three stage randomisation process to ensure impartiality. Candidates along with their counting agents and election agents are also present in the counting hall.
Counting of votes begins with Electronically Transmitted Postal Ballots (ETPB) and Postal Ballots (PB). These votes are counted under the direct supervision of the RO. Counting of EVMs can start 30 minutes after the commencement of PB counting, even if all PBs have not been counted. At the end of each round of counting, the results from 14 EVMs are declared.
What is the process for counting VVPAT slips?
The ECI prescribes the process for randomly selecting one EVM for each assembly segment of a parliamentary constituency for VVPAT matching. The verification of VVPAT paper slips is conducted inside a secured VVPAT Counting Booth in the counting hall with access to authorised personnel only. Any counting table in the hall can be converted into VVPAT Counting Booth after completing EVM vote counting. Parliamentary constituencies generally have between five and ten assembly segments.
The Supreme Court has decided that VVPAT slips of five randomly selected polling stations for each assembly segment shall be matched with the result shown in the respective EVMs. This implies that VVPAT paper slips need to be matched for about 25-50 machines for each parliamentary constituency. This process requires personal supervision of RO/ARO. The ECI has decided that the counting of five VVPATs will be done sequentially.[5] The RO can declare the final result for the constituency after the VVPAT matching process has been completed.
What happens if there is a discrepancy between the VVPAT count and the EVM results?
In such a case, the printed paper slips count is taken as final. The ECI has not clarified whether there would be any further action (such as counting of all VVPATs in a constituency or assembly segment) if there is a discrepancy in the counts of one of the five VVPATs.
[1] https://www.eci.gov.in/files/file/8756-status-paper-on-evm-edition-3/.
[2] N Chandrababu Naidu and Ors. v. Union of India and Anr WP(C). 273/2019 decided on April 8, 2019.
[3] https://www.eci.gov.in/files/file/9400-hand-book-for-returning-officer-february-2019/.
[4] https://www.eci.gov.in/faqs/elections/election-machinery/faqs-election-machinery-r1/.
[5] https://www.eci.gov.in/files/file/10197-mandatory-verification-of-vvpat-paper-slips-regarding/.
