The Arms Act, 1959 governs matters related to acquisition, possession, manufacture, sale, transportation, import and export of arms and ammunition. It defines a specific class of ‘prohibited’ arms and ammunitions, restricts their use and prescribes penalties for contravention of its provisions. Section 7 of the Act forbids the manufacture, sale, and use of prohibited arms and ammunition unless it has been specially authorised by the central government.1 Section 27(3) prescribes that any contravention of Section 7 that results in the death of any person 'shall be punishable with death'.2 Section 27(3) of the Act was challenged in the Supreme Court in 2006 in State of Punjab vs. Dalbir Singh. The final verdict in the case was pronounced last week. The judgment not only affects the Act in question but may have important implications for criminal law in the country. Legislative history of Section 27 When the law was first enacted, Section 27 provided that possession of any arms or ammunition with intent to use the same for any unlawful purpose shall be punishable with imprisonment up to seven years and/ or a fine. This section was amended in 1988 to provide for enhanced punishments in the context of escalating terrorist and anti-national activities. In particular, section 27(3) was inserted to provide for mandatory death penalty. The Judgment The Supreme Court judgment says that Section 27(3) is very 'widely worded'. Any act (including use, acquisition, possession, manufacture or sale) done in contravention of Section 7 that results in death of a person will attract mandatory death penalty. Thus, even if an accidental or unintentional use results in death, a mandatory death penalty must be imposed. The bench quotes relevant sections of an earlier judgment delivered in 1983, in Mithu vs. State of Punjab. In this case, the court had looked into the constitutional validity of mandatory death sentence. The final verdict had ruled that a provision of law which deprives the Court of its discretion, and disregards the circumstances in which the offence was committed, can only be regarded as 'harsh, unjust and unfair'. The judgment goes on to say that the concept of a 'just, fair and reasonable' law has been read into the guarantees under Article 14 (Equality before law) and Article 21 (Protection of life and personal liberty) of the Constitution. A law that imposes an irreversible penalty such as death is 'repugnant to the concept of right and reason'. Therefore, Section 27 (3) of the Arms Act, 1959 is unconstitutional. Section 27(3) is also unconstitutional in that it deprives the judiciary from discharging its duty of judicial review by barring it from using the power of discretion in the sentencing procedure. What happens now? Under Article 13 of the Constitution, laws inconsistent with the Constitution shall be null and void. Therefore, Section 27(3) of the Arms Act, 1959 shall now stand amended. Courts shall have the discretion to impose a lesser sentence. It is noteworthy that the Home Minister had also introduced a Bill in the Lok Sabha on the 12th of December, 2011 to amend the Arms Act, 1959. The Bill seeks to remove the words ‘shall be punishable with death’ and replace these with ‘shall be punishable with death or imprisonment for life and shall also be liable to fine’. This Bill is currently being scrutinized by the Standing Committee. Notes: 1) Section 7 of the Arms Act, 1959: “7. Prohibition of acquisition or possession, or of manufacture or sale, of prohibited arms or prohibited ammunition. No person shall -- (a) acquire, have in his possession or carry; or (b) use, manufacture, sell, transfer, convert, repair, test or prove; or (c) expose or offer for sale or transfer or have in his possession for sale, transfer, conversion, repair, test or proof; any prohibited arms or prohibited ammunition unless he has been specially authorised by the Central Government in this behalf.” 2) Section 27(3) of the Arms Act, 1959: “27(3) Whoever uses any prohibited arms or prohibited ammunition or does any act in contravention of section 7 and such use or act results in the death of any other person, shall be punishable with death.” Sources: Arms Act, 1959; Supreme Court judgment
Recently, the Supreme Court collegium reiterated its recommendations for the appointment of 11 judges to certain High Courts. It had first recommended these names earlier this year and in August last year, but these appointments were not made. The Indian judiciary faces high vacancies across all levels (the Supreme Court, High Courts, and subordinate courts). Vacancy of judges in courts is one of the reasons for delays and a rising number of pending cases, as there are not enough judges to hear and decide cases. As of today, more than four crore cases are pending across all courts in India. In this blog post, we discuss vacancies across courts over the years, delays in appointment of judges, and methods to determine the adequate judge strength required to handle the caseload courts face.
High vacancy of judges across courts
Vacancies in courts keep on arising periodically due to retirement, resignation, demise, or elevation of judges. Over the years, the sanctioned strength of judges in both High Courts and subordinate courts has been increased gradually. However, vacancies persist due to insufficient appointments (see Figures 1 and 2). Between 2010 and 2020, vacancies increased from 18% to 21% across all levels of courts (from 6% to 12% in the Supreme Court, from 33% to 38% in High Courts, and from 18% to 20% in subordinate courts).
|
Figure 1: Vacancy of judges in High Courts |
Figure 2: Vacancy of judges in subordinate courts |
|
|
|
|
Sources: Court News 2010-2018; Vacancy Statement, and Rajya Sabha replies, Part I, Budget Session (2021), Department of Justice; PRS. |
|
As on November 1, 2021, the Supreme Court had a vacancy of one judge (out of a sanctioned strength of 34). Vacancy in High Courts stood at 37% (406 posts vacant out of a sanctioned strength of 1,098). Since May, 2021, the Supreme Court collegium has recommended more than 130 names for appointment as High Court judges. In three High Courts (Telangana, Patna, and Calcutta), at least half of the posts are vacant (see Figure 3). The Standing Committee on Personnel, Public Grievances, Law and Justice (2020) noted that every year, 35-40% of posts of High Court judges remain unfilled.
|
Figure 3: Vacancy of judges across High Courts (in %) (as on November 1, 2021)
|
|
Source: Vacancy Statement, Department of Justice; PRS. |
Appointments of High Court judges are guided by a memorandum of procedure. As per this memorandum, the appointment process is to be initiated by the concerned High Court at least six months before a vacancy occurs. However, the Standing Committee (2021) noted that this timeline is rarely adhered to by High Courts. Further, in the final stage of the process, after receiving recommendations from the Supreme Court collegium, the executive appoints judges to the High Court. No timeline is prescribed for this stage of the appointment process. In 2018 and 2019, the average time taken to appoint High Court judges after receiving the collegium’s recommendations was five to seven months.
As of today, over 3.6 crore cases are pending before subordinate courts in India. As on February 20, 2020, 21% posts for judges were vacant (5,146 posts out of the sanctioned strength of 24,018) in subordinate courts. Subordinate courts in Bihar, Haryana, and Jharkhand (among the states with high population) had a high proportion of vacancies of judges (see Figure 4). Note that the Supreme Court is monitoring the procedure for appointment of judges to subordinate courts.
For an analysis of the data on pendency and vacancies in the Indian judiciary, see here.
Figure 4: Vacancy of judges across subordinate courts (in %) (as on February 20, 2020)
|
|
|
Source: Report No. 101, Standing Committee on Personnel, Public Grievances, Law and Justice (2020); PRS. |
How many judges do we need?
The Law Commission of India (1987) had noted the importance of manpower planning for the judiciary. Lack of adequate number of judges means a greater workload per judge. Thus, it becomes essential to arrive at an optimal judge strength to deal with pending and new cases in courts. Over the years, different methods of calculating the required judge strength for subordinate courts (where the backlog of cases in the Indian judiciary is concentrated) have been recommended (see Table 1).
Table 1: Methods recommended for calculating the required number of judges for subordinate courts
|
Method of calculation |
Recommendation and its status |
|
Judge-to-population ratio: optimum number of judges per million population |
The Law Commission of India (1987) had recommended increasing this ratio to 50 judges per million people. This was reiterated by the Supreme Court (2001) and the Standing Committee on Home Affairs (2002). For 2020, the judge-to-population ratio was 21 judges per million population. Note that this figure is calculated based on the sanctioned strength of judges in the Supreme Court, High Courts and subordinate courts. |
|
Rate of disposal: number of additional judges required (to clear the existing backlog of cases and ensure that new backlog is not created) based on the average number of cases disposed per judge |
The Law Commission of India (2014) proposed this method. It rejected the judge-to-population ratio method, observing that filing of cases per capita varies substantially across geographic units depending on socio-economic conditions. |
|
Weighted case load method: calculating judge strength based on the disposal by judges, taking into account the nature and complexity of cases in local conditions |
The National Court Management Systems Committee (NCMS) (2016) critiqued the rate of disposal method. It proposed, as an interim measure, the weighted case load method, which addresses the existing backlog of cases as well as the new flow of cases every year in subordinate courts. In 2017, the Supreme Court accepted this model. |
|
Time-based weighted case load method: calculating the required judge strength taking into account the actual time spent by judges in different types of cases at varying stages based on an empirical study |
Used widely in the United States, this was the long-term method recommended by the NCMS (2016) to assess the required judge strength for subordinate courts. It involves determining the total number of ‘judicial hours’ required for disposing of the case load of each court. The Delhi High Court used this approach in a pilot project (January 2017- December 2018) to calculate the ideal judge strength for disposing of pending cases in certain courts in Delhi. |
Sources: Reports No. 120 (1987) and 245 (2014), Law Commission of India; Report No. 85, Standing Committee on Home Affairs (2002); Note for Calculating Required Judge Strength for Subordinate Courts, National Court Management Systems Committee (NCMS) (2016); Imtiyaz Ahmad vs. State of Uttar Pradesh, Supreme Court (2017); PRS.
